Search in blog

Blog categories

View all categories

How to install a metal kitchen backsplash?

Do you want to add a touch of innovation to your kitchen? Then it's time to install a stainless steel kitchen backsplash or an aluminum range hood backsplash.

No need to panic, it's very simple! We'll explain how to proceed in 4 easy steps to achieve a perfect result. Simply follow our guide!

🔨 The configuration of your metal backsplash

🔰 Step 1: Take the dimensions of your kitchen

Take the dimensions in mm and record them on a plan during the process. To avoid errors, it's best to allow 1 mm of margin on each side. If you have electrical outlets, remove the covers and take your measurements outside the screws.

The custom backsplash can also pass behind light fixtures, remember to remove them to facilitate installation.

🔰 Step 2: Order your metal kitchen backsplash or range hood backsplash

To order your custom backsplash, nothing could be simpler. First, go to our backsplash kit full of Steel and in two shakes of a lamb's tail configure your own kitchen backsplash:

Choose between 'stainless steel or scratch-resistant aluminum
Choose a shape
Enter your dimensions

In addition to being able to make a kitchen backsplash to your measurements, you can also define the locations of your electrical outlets based on your needs.

When you purchase, 1 tube of adhesive mastic ideal for glue and joint will be provided free of charge. Then, you can also complete your order by ordering a pair of anti-cut gloves for more safety during installation.

But John Steel wants to best support you in your custom projects, we make other useful accessories available on our site to best carry out your projects.

🔨 Installation of your custom backsplash

🔰 Step 1: Glue your backsplash

The first step is installing your backsplash on your wall. As a precaution, have a clean and healthy environment to avoid damaging the sheet:

1. Carefully unpack your package and remember to keep the packaging cardboard to protect your worktop to avoid scratching the custom backsplash.

Before proceeding with the installation, wipe your wall with a dry cloth to optimize the adhesive grip.
Check the dimensions of your backsplash by testing the placement without glue in case modifications are needed.

2. Apply the adhesive mastic to the back of your sheet, making dabs approximately every 15 cm.

3. Then, place your kitchen backsplash from bottom to top, pressing with your hands for even distribution of the adhesive.

4. Adjust the adhesive level with a ruler to obtain a perfectly straight backsplash, thus compensating for defects in your wall.

5. And finally, let it rest for 24 hours for complete and optimal drying.

🔰 Step 2: Applying a seal around your backsplash

This step is optional but allows for an optimal finish of your kitchen backsplash. After having allowed at least 24 hours of drying after the first step, you can proceed to the next step:

1. Carefully remove the protective film by small areas to avoid creating strong tension on the adhesive, risking weakening the grip. Reinstall your electrical outlets as well as your light fixtures.

2. Fill in empty spaces and create a joint with the remaining adhesive mastic for a flawless final appearance. For this, a little tip, apply the mastic generously to the desired area, then use a spatula or a rounded-end utensil to get a clean and uniform result.

If you don't have utensils, apply soapy water to your finger and run it along the joint to remove the excess.

3. Then let it dry for 12 hours and remove the excess.

And as we know each project is unique, come discover how to choose the right metal for your kitchen backsplash and impress:

And don't forget to send us your finest masterpieces by email by clicking on the image!

Posted in: How to Make a Stainless Steel Sheet Shine? ✨, Conseils Credence

Name

Subject

Comment

Security code:

Comments

By: Jean-Marc On 2024-04-08

Bonjour, le mur où je prévois la pose est irrégulier du fait qu'il y avait des carreaux qui ont été enlevés. Ils étaient collés au ciment sur de la brique. Faut il reboucher toutes les anfractuosités à l'enduit, ou le collage direct est il possible ?

Replied by: John Steel On 2024-04-12 Bonjour Jean-Marc,

Pour une pose efficace et pour éviter que la crédence soit mal collée, nous conseillons de reboucher les trous pour avoir une surface correcte. Cependant, si les ouvertures ne sont que partielles, il ne devrait pas avoir de problème pour poser directement sur votre mur de cuisine car une crédence en métal est assez rigide pour ne pas constater les imperfections sur votre mur.

En espérant vous avoir aidé.

Cordialement, John Steel.
By: Gallinotti Anne On 2022-09-05

Bonjour Nathalie,
Est-ce que je peux poser de l’inox sur les faïences de la cuisine ( en crédence )
Merci pour votre retour.
AGallinotti
By: Gauthey Nathalie On 2021-12-06

J aimerais savoir le prix des panneaux de crédence en 60 cm de haut en inox et en alu svp ? Cdt n gauthey

Replied by: John Steel On 2021-12-20 Bonjour Nathalie,
Pour vous permettre d'obtenir un prix sur-mesure, le plus simple est de vous rendre sur notre page spéciale crédence : https://www.john-steel.com/fr/21-credences
En deux temps trois mouvements, vous aurez la possibilité d'obtenir le prix le plus juste possible pour votre projet.
A bientôt,
John

Metal in decor for an ethnic style!

Posted in: How to Make a Stainless Steel Sheet Shine? ✨, Anodised aluminium, the ideal material for your interior!

2019-06-05

Metal in history 💬 The symbolism of metal 🙏 Do you love traveling and discovering other cultures? And are you the...

What is food-grade stainless steel used for?

Posted in: How to Make a Stainless Steel Sheet Shine? ✨

2019-07-24

Stainless steel, what exactly is it? 🧐 #WhatIsIt 📢 Steelster tip: How to recognize food-grade stainless steel? The...

How to reduce the price of laser-cut metal plates?

Posted in: How to Make a Stainless Steel Sheet Shine? ✨, Looking for custom metal cutting?

2020-01-08

💰 Reduce the price by choosing the right metal 💰 Reduce the price by choosing the right thickness 💰 Reduce the price...

The 10 Largest Steel-Producing Countries in 2017

Posted in: How to Make a Stainless Steel Sheet Shine? ✨, Les News

2018-11-29

The world's top steel producers in 2017: China leads the way, with France in 15th position. China confirms its...

How to renovate a metal plate?

Posted in: How to Make a Stainless Steel Sheet Shine? ✨

2020-01-05

🔸 First of all, you need to strip your metal before renovating it 🔸 A final little touch for the finish 🔸 A coat of...