Custom metal privacy screen - Art Deco Lattice
  • Custom metal privacy screen - Art Deco Lattice
  • Custom metal privacy screen - Art Deco Lattice
  • Custom metal privacy screen - Art Deco Lattice
  • Custom metal privacy screen - Art Deco Lattice

Custom metal privacy screen - Art Deco Lattice

Art deco lattice privacy screen: a refined geometric trellis

The art deco lattice privacy screen creates a striking graphic atmosphere without crowding your space. Its diagonal lines intersect to form squares balanced on their points, nested within one another. Five small solid diamonds punctuate the lattice, alternating left and right. Airy and regular, this panel filters views while allowing light to flow through freely.

Laser cut to your specifications and made in France, it is crafted as a single piece of sheet metal including its frame. You can select the material, thickness, and size using our configurator. Please note that the pattern has a specific top and bottom: keep this orientation in mind during installation, as the diamonds have a particular order to follow.

Art Deco Lattice: a decorative metal screen with geometric precision

The design consists of fine, regular diagonals that cross each other. They construct squares resting on their points, nested one inside the other. Five small solid diamonds punctuate the trellis, alternating from left to right. The lines remain open and airy, while the frame provides a clean, sharp border around the motif.

The openwork allows air and light to circulate while providing a visual filter. The small solid elements rhythm the grid without overloading it: the eye follows the diagonals before resting on the diamonds. When installing, pay close attention to the top and bottom of the panel to maintain the intended alternation. This garden screen panel is a perfect addition to any modern architectural project.

This art deco screen can define a terrace corner or dress up a fence with a regular pattern. It creates a separation without turning your space into a solid wall: the lines do all the heavy lifting without having to shout.

Choose your material for your custom privacy screen

The material gives character to your art deco lattice privacy screen and determines where it can be installed. For a large-scale metal privacy screen, a slightly thicker gauge provides better rigidity, depending on the material selected.

MaterialAvailable ThicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains its natural grey-black hue for a sober, industrial feel. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

Whether it is for a pergola opening, a section of fencing, or a room divider, every location has its own proportions. You enter the desired size in the configurator, and the design proportions are maintained so that the lattice keeps its rhythm. The configurator also accounts for the technical limits related to the chosen thickness.

Before ordering your art deco lattice privacy screen, identify the area to be dressed and take precise measurements. Consider the distance from which you will view the panel and the height of the views you wish to filter. For several panels placed side by side, choose the same size so that the trellis continues seamlessly from one frame to the next.

Your custom piece thus adapts perfectly to your project. Have you already designed a different pattern or wish to integrate specific details? You can upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen can define a dining area, dress up a fence, or structure a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor screen in stainless steel or aluminium maintains its appearance through the seasons, while the lattice lines create a decorative shield.

Indoors, the panel can separate an entrance from the living room, structure a home office, or dress up a wall without blocking the light. Raw steel fits perfectly here with its natural grey-black finish. The trellis brings a geometric rhythm without demanding all the attention: it knows how to stay in its place, even if its intersections catch the eye.

Corten steel is for outdoors only. Its rust patina forms over time and can run off with the rain; indoors, it would stain walls and floors. Outside, its warm tones pair beautifully with brick and ivy.

Fixing and maintenance

The design does not include pre-drilled fixing holes. Installation is carried out via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you require specific holes during the cutting process, you may submit your own file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. For stainless steel, a suitable cleaner applied in the direction of the brushing will revive the shine. Corten patinates naturally outdoors without any special care. Avoid abrasive sponges and chlorine-based products, which could mark the surfaces.

For your art deco lattice privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». It is time to give your space the right rhythm.

FAQ about the art deco lattice privacy screen

Can the art deco lattice privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc coating. Corten is designed for outdoors and patinates naturally. Raw steel is intended for indoor use as it oxidises in humid air. This panel is ideal for dressing a fence or defining a terrace.

Can corten steel be used indoors?

No. The rust patina of corten continues to develop and can run off with moisture. Indoors, this would stain your walls and floors. This material is therefore for outdoors only, such as in a garden or on a facade. For indoor separations, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen?

The size is selected in the configurator, which preserves the lattice proportions. Measure your space and consider the viewing distance, supports, and the height of the views you want to filter. If aligning multiple panels, keep the size identical to extend the lattice regularly. A cardboard template helps visualise the footprint before confirming.

How do I fix a metal privacy screen?

The design contains no fixing holes. The panel is mounted by its frame onto posts, a chassis, or a wall, using screws suited to the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets must be provided. Check the strength of your support before choosing your method.

Brushed stainless steel or raw steel: which one to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and suits both indoor and outdoor use. Raw steel (2 to 20 mm) provides a natural grey-black tone and is best for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina but is for outdoors only.

Are galvanised steel or aluminium suitable for outdoors?

Yes, both are suitable. Galvanised steel is protected by a zinc layer; a thickness of at least 1.5 mm is recommended for this use. Anodised aluminium is lightweight and does not rust. The choice depends on the desired aesthetic and your installation. Ensure the frame and mounting points are compatible with your support.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually enough to remove dust. For brushed stainless steel, use a specific product and wipe in the direction of the brushing. Corten requires no special maintenance as its patina develops naturally outdoors. Avoid abrasive sponges and chlorine products, which can mark the metal and alter its appearance.

Can I have my own design laser cut?

Yes. You can upload your DXF file to john-steel.com to have it laser cut in the material and thickness of your choice. This is useful for creating a personal motif or planning specific fixing holes for your installation. The file must follow the preparation guidelines indicated on the website before submission.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.