Custom metal privacy screen - Art Deco Links
  • Custom metal privacy screen - Art Deco Links
  • Custom metal privacy screen - Art Deco Links
  • Custom metal privacy screen - Art Deco Links
  • Custom metal privacy screen - Art Deco Links

Custom metal privacy screen - Art Deco Links

Art deco link privacy screen: vertical rhythm and style

The art deco link privacy screen creates a graphic separation without closing off your space. Three columns of elongated links, featuring hexagons and diamonds, run the full height and are punctuated by small diamond accents. At mid-height, wide chevrons connect the columns. These straight, regular lines are perfect for dressing up a terrace, filtering a view, or structuring a room while letting light flow through.

This perforated panel is laser cut to measure and made in France as a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. The design is symmetrical from left to right but has a distinct top and bottom: please ensure the correct orientation during installation, as the links have a slight preference for which way is up.

Art Deco Links: a decorative metal screen of links and chevrons

The design is organised into three vertical columns. Elongated links, alternating between hexagonal and diamond shapes, chain together across the entire height. Small diamonds punctuate this regular grid, while wide chevrons link the columns at the midpoint. The straight lines maintain a constant thickness, and the frame surrounds the design within the same piece of metal.

The pattern is symmetrical from left to right, but not from top to bottom: it has a top and a bottom that must be respected during installation. Its openings create a vertical rhythm that filters sightlines and allows light to pass. This art deco link privacy screen brings a graphic structure to a fence or a room divider without turning the space into a solid wall.

This panel complements our selection of garden panels to dress up an exterior with a perforated design.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material gives your art deco link privacy screen its character and determines where it can be installed. Brushed stainless steel highlights the lines with a satin glow, while raw steel provides a darker contrast. For a large metal privacy screen, a greater thickness provides better stability where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a luminous satin appearance and resists corrosion well. Raw steel retains its natural grey-black hue, while galvanised steel receives a zinc protection for a matte grey finish. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

Whether for a pergola opening, a fence, or an interior divider, the size is selected in the configurator. The proportions of the design are preserved: the columns and links maintain their vertical rhythm. The configurator also considers the chosen thickness and will block sizes that are too small for that specific material.

Before ordering your art deco link privacy screen, measure the space to be filled and consider the distance from which you will view the panel. If you plan to install several panels side by side, identical sizes ensure the continuity of the pattern. A cardboard template can help you visualise the final result before confirming your choice.

Your custom panel thus adapts to your project. Do you want a different design or personalised openings? You can upload your own DXF to have it laser cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal screen can add rhythm to a fence, protect a dining area from prying eyes, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. An outdoor privacy screen in metal allows air to circulate while giving a graphic presence to your landscaping.

Indoors, the panel can define an entrance, separate two areas, or dress up a staircase without blocking all the light. Raw steel is well-suited for these uses with its grey-black appearance. The vertical design draws the eye, so it is best to give it a little room to breathe.

Corten steel is for outdoors only. Its patina forms over time and can run off with rain; it would stain indoor walls and floors. Outside, its warm tones pair beautifully with brick walls and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, a wall, or a pergola, using screws adapted to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you require pre-cut holes, you can send your own file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On brushed stainless steel, use a suitable cleaner in the direction of the brushing. Corten patinates naturally outdoors and requires no special care: it already has its own plan for how to look.

For your art deco link privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». The links are ready to find their place.

FAQ about the art deco link privacy screen

Can the art deco link privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium are suitable for outdoors, as is galvanised steel from the recommended thickness. Corten is for outdoors only and patinates over time. Raw steel is intended for indoors, as humidity can encourage oxidation. This perforated panel can thus style a fence or protect a terrace area.

Can corten steel be installed indoors?

No. The rust patina of corten continues to form and can run off with humidity. Indoors, it would risk staining walls, floors, or textiles. This material is reserved for outdoors, where it can evolve in contact with rain and air. For a separation inside the home, choose brushed stainless steel, anodised aluminium, or raw steel instead.

What size should I choose for this screen panel?

The size is chosen in the configurator, which preserves the design proportions. Measure the available space and consider the height of the views you wish to filter as well as the distance from which you will see the panel. For several panels side by side, keep the same size to extend the rhythm of the columns. A cardboard template helps with projection.

How do I fix the metal privacy screen?

The design does not feature fixing holes. The panel is mounted by its frame onto posts, a chassis, or a wall, using screws adapted to the support and weight. The piece is supplied without accessories: screws, plugs, and posts must be arranged separately. You can send a DXF file with holes if your project requires them.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and suits both indoor and outdoor use. Raw steel (2 to 20 mm) has a grey-black finish and is installed preferably indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but is for outdoors only.

Galva or anodised aluminium for outdoor use?

Both materials are suitable for outdoors. Galvanised steel is protected by its zinc layer; a thickness of at least 1.5 mm is advised outside. Anodised aluminium is lightweight, does not rust, and is available in thicknesses from 1.5 to 2 mm. The choice depends on the desired look and the installation constraints of your screen.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally enough to remove dust. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Corten patinates naturally outdoors and requires no treatment. Avoid abrasive sponges and chlorinated products, which could mark certain surfaces.

Can I have my own design laser cut?

Yes. Send your DXF file to john-steel.com to have it laser cut in the chosen material and thickness. This is useful if you want to create a different pattern, include fixing holes, or match several panels. The cutting service is available to both individuals and professionals directly through the website.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.