Custom metal privacy screen - Art Deco Trellis
  • Custom metal privacy screen - Art Deco Trellis
  • Custom metal privacy screen - Art Deco Trellis
  • Custom metal privacy screen - Art Deco Trellis
  • Custom metal privacy screen - Art Deco Trellis

Custom metal privacy screen - Art Deco Trellis

Art deco trellis privacy screen: fine lines, diamonds and arcs

An art deco trellis privacy screen creates a graphic separation without closing off your space. Beams of three fine diagonal lines intersect to form a large diamond trellis; at the heart of these, concentric semi-circle arcs provide a steady rhythm. The large open areas allow air and light to flow freely. Whether in a garden, on a terrace, or inside a room, it filters views with effortless elegance.

Laser-cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. The design is symmetrical from left to right; the top and bottom look similar without being identical. In short, it has a great sense of balance, even if it is not perfectly upside-down compatible.

Art Deco Trellis: diamonds crossed by arcs

The art deco trellis privacy screen pattern consists of beams of three fine, regular diagonal lines. These cross to create a large diamond trellis. Within the diamonds, concentric semi-circle arcs echo the rhythm of the design. The frame surrounds the panel and holds everything together as a single piece of metal, with no fixing holes within the pattern itself.

The large diamond openings give the panel an airy feel: it filters sightlines while letting light and air pass through. The composition is symmetrical from left to right. The top and bottom are similar but not identical; please plan its orientation during installation. The lines remain fine and consistent, forming a geometric motif without feeling cluttered.

This art deco screen joins our selection of garden screen panels. The trellis is equally suited for a decorative fence or a light separation inside the home.

Choose your decorative metal screen material

The material gives character to your art deco trellis privacy screen and determines where it can be installed. The fine lines stand out differently depending on the metal chosen. For a large surface panel, a slightly thicker gauge can provide more rigidity, where available for the selected material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Our brushed stainless steel offers a luminous, satin appearance while resisting corrosion. Raw steel retains its natural grey-black hue for an industrial look. Protected by zinc, galvanised steel takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen for your space

To dress up a pergola opening, add rhythm to a fence, or separate two areas, you can choose the size of your panel in the configurator. The proportions of the motif are preserved: the diamonds and their arcs remain regular. You thus obtain a custom privacy screen adapted to your location, whether it stands alone or is aligned with other panels.

Before ordering your panel, measure the available space and identify the view you wish to preserve. Also consider its orientation: the design is symmetrical from left to right, while the top and bottom are not identical. The configurator will block sizes that are too small for the chosen thickness to ensure the laser cut remains stable.

Do you have a personal design you want cut? You can upload your own DXF. For the Art Deco Trellis, size and material are adjusted directly in the configurator.

Indoor or outdoor privacy screen: where to install

Outdoors, this metal privacy screen can dress up a fence, protect a dining area, or structure a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel are all suitable for the exterior. An outdoor screen with an openwork design allows air to circulate while beautifully framing the view of the garden.

Indoors, the panel creates a light separation between an entrance and a living room, or highlights a zone without closing it off. Raw steel is well-suited for these uses, with its natural grey-black appearance. The arcs and diagonal lines add a graphic detail without weighing down the room.

Corten steel is for outdoor use only. Its patina forms progressively and can run off with rain; it would stain walls and floors indoors. Outdoors, its warm patina blends perfectly with brick, stone, and vegetation.

Fixing and maintenance

The design does not include fixing holes. Installation is intended via the frame, onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If your project requires specific holes, you can integrate them into your own DXF file.

Maintenance is simple: a slightly damp microfibre cloth is usually sufficient. For brushed stainless steel, a suitable cleaner applied in the direction of the brushing will revive the satin look. Corten patinas naturally outdoors and requires no special care.

For your art deco trellis privacy screen, choose the material, thickness, and size, then click "Configure & buy". Your trellis is ready to take its place in your decor.

FAQ about the Art Deco Trellis privacy screen

Can the art deco trellis privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the exterior and patinas outdoors. Raw steel is better suited for indoor installation, as it oxidises in humid air. Thus, this screen can beautifully dress a terrace or a fence.

Can corten steel be used indoors?

No. The rust patina of corten continues to form and can run with humidity. Indoors, it would risk staining walls and floors. Corten is therefore reserved for the exterior, where its patina fits perfectly in a garden, on a facade, or a terrace. For an indoor separation, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen?

The size is chosen in the configurator, which maintains the motif's proportions. Measure the space to be filled and take into account the posts, frame, or low wall planned for installation. Also consider the view to be filtered and the orientation: the top and bottom of the design are similar but not identical. A cardboard template helps visualise the result.

How do I fix a metal privacy screen?

The design does not feature fixing holes. The panel is generally fixed by its frame onto posts, a chassis, or a wall, using screws adapted to the support and weight. It is supplied without accessories: screws, plugs, posts, and brackets are not provided. Please plan these elements according to your specific installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin look and suits both indoors and outdoors. Raw steel (2 to 20 mm) keeps a natural grey-black hue and is better for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof; corten (1.5 mm) develops a warm patina, only outdoors. The choice depends on the desired look and location.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. It may dull over time, which is normal. Anodised aluminium does not rust and is also suitable for outdoors. Both materials allow you to enjoy the openwork motif on a terrace or fence.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is enough for routine maintenance. On brushed stainless steel, use a suitable cleaner in the direction of the brushing. Avoid abrasive sponges and chlorine products, which could mark the surface. Corten patinas naturally outdoors and requires no particular treatment.

Can I have my own design laser cut?

Yes. You can send your DXF file via john-steel.com to have it laser cut in the material and thickness of your choice. This is useful for creating a motif that matches your art deco trellis privacy screen or for planning fixing holes adapted to your support. Folding services are also available for both individuals and professionals on the site.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.