Custom metal privacy screen - Art Deco Peaks
  • Custom metal privacy screen - Art Deco Peaks
  • Custom metal privacy screen - Art Deco Peaks
  • Custom metal privacy screen - Art Deco Peaks
  • Custom metal privacy screen - Art Deco Peaks

Custom metal privacy screen - Art Deco Peaks

Art deco peaks privacy screen: a chain of zigzag lines

An art deco peaks privacy screen creates a striking chain of zigzag peaks across the entire height of the panel. Parallel striped bands fold into large chevrons, alternating between an upward point and a downward point. Solid triangles highlight the folds, while narrow, elongated cut-outs allow light to flow through. It is a graphic design perfect for separating spaces without enclosing them.

Laser-cut to your specifications and made in France, the panel is crafted as a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. Please note that the pattern has a specific top and bottom; ensure the peaks are oriented correctly during installation to maintain the intended flow.

Art Deco Peaks: parallel line chevrons

The design consists of parallel striped bands that fold successively into large chevrons. Their points alternate up and down, forming a zigzag chain throughout the panel. Solid triangles accentuate the folds and emphasize the changes in direction. The lines remain sharp and clean, featuring narrow, elongated openings.

The pattern creates a regular vertical rhythm without distracting the eye with unnecessary details. The metal bands form the chevrons while the stretched voids let air and light pass through. This decorative metal screen filters views and provides a light visual separation. As mentioned, the panel has a top and a bottom: be careful to orient the peaks as intended when installing.

This art deco screen complements our selection of garden screen panels, ideal for adding rhythm to a fence or dressing up an outdoor area.

Choose your material for your custom privacy screen

The material gives your art deco peaks privacy screen its character and determines where it can be installed. Stainless steel or aluminium brighten the lines, while raw steel highlights the design with its natural tone. For a large-scale panel, a greater thickness provides better rigidity, where available for the chosen material.

Material Available thicknesses Installation
Brushed stainless steel 1 to 4 mm Indoor or outdoor
Raw steel 2 to 20 mm Preferably indoor
Galvanised steel 1 to 3 mm Indoor, or outdoor (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoor or outdoor
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin look and excellent corrosion resistance. Raw steel retains its natural grey-black hue. Galvanised steel, protected by zinc, has a matte grey finish; anodised aluminium is lightweight and rust-proof.

A custom privacy screen tailored to your space

Whether it is a pergola opening, a section of fencing, or a divider between two rooms, every location has its own proportions. Simply enter your desired size in the configurator, and the pattern proportions will be preserved. The chevrons remain faithful to the original design, with the parallel stripes and triangles highlighting every fold.

Before ordering your art deco peaks privacy screen, measure the area to be covered and consider the distance from which you will view the panel. If you plan to install several panels side by side, choose the same size to maintain a regular continuity. The configurator will block sizes that are too small for the selected thickness, as the lines need their proper space to exist.

Your custom panel thus adapts perfectly to your project. Do you have a different design in mind? You can also upload your own DXF to have it laser-cut.

Indoor or outdoor installation

Outdoors, this metal privacy screen structures a terrace, filters views on a dining area, or adds rhythm to a fence. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor screen can also create a graphic backdrop behind plants, letting the open stripes cast artistic shadows.

Indoors, the panel separates two areas without closing them off, such as an entrance and a living room. It can also dress up a wall or a staircase. Raw steel fits perfectly here with its natural grey-black finish, while the straight lines give the decor a clean structure.

Corten steel is for outdoors only. Its patina develops over time and can run off during rain; it would stain interior walls and floors. Outside, its warm tones blend beautifully with bricks and greenery.

Fixing and maintenance

The design does not include any fixing holes. Installation is done via the frame, onto posts, a chassis, a wall, or a pergola, using screws suitable for the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you.

For routine maintenance, a slightly damp microfibre cloth is usually enough. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Avoid abrasive sponges and chlorine-based products. Corten patinates naturally outdoors without any special care: it enjoys its independence.

For your art deco peaks privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». It is time to give the peaks their rhythm.

FAQ about the art deco peaks privacy screen

Is the art deco peaks privacy screen suitable for outdoors?

Yes, depending on the material. Brushed stainless steel, anodised aluminium, and galvanised steel can be installed outside. Corten is reserved for outdoors, where its patina forms naturally. Raw steel is intended for indoor use, as it can oxidise in humid air. The open chevron pattern is ideal for a terrace or fence.

Can corten be installed indoors?

No. The rust patina of corten continues to evolve and can run off with moisture. Indoors, it would likely stain walls and floors. This material is therefore for outdoors only, such as in the garden, on a facade, or a terrace. For indoor separation, choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen panel?

The size is selected in the configurator, which maintains the pattern's proportions. Measure the space to be covered and consider what you wish to hide and the viewing distance. If aligning several panels, keep the same size for regular continuity. A cardboard template can help you visualise the result before ordering.

How do I fix a metal privacy screen?

The design does not feature fixing holes. The panel is mounted by its frame onto a suitable support, such as posts, a chassis, or a wall. Ensure you use screws that match the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets are not included.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin look and works both inside and out. Raw steel (2 to 20 mm) offers a natural grey-black tone and is best for indoor installation. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina but is for outdoors only.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a minimum thickness of 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for outdoor installation. Both materials allow you to enjoy the chevron pattern on a fence or terrace, depending on the desired look.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually sufficient to remove dust. For brushed stainless steel, a suitable cleaner used in the direction of the brushing restores the satin finish. Avoid chlorine products and abrasive sponges, which may mark the surface. Corten patinates naturally outdoors and requires no special maintenance.

Can I have my own design laser-cut?

Yes. You can upload your DXF file to john-steel.com to have it laser-cut in the material and thickness of your choice. This is useful if your project requires a different shape or specific fixing holes integrated into the file. The dedicated configurator will guide you through submitting your design.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.