Custom metal privacy screen - Geometric Shards
  • Custom metal privacy screen - Geometric Shards
  • Custom metal privacy screen - Geometric Shards
  • Custom metal privacy screen - Geometric Shards
  • Custom metal privacy screen - Geometric Shards

Custom metal privacy screen - Geometric Shards

Geometric shard privacy screen: a perforated metal mosaic

The geometric shard privacy screen creates a graphic barrier without closing off your space. Irregular triangles and polygons evoke shattered glass or a mosaic of shards. Its thick bars, with a consistent width, create a play of solids and voids that filters views while letting light flow through. It is perfect for dressing up a terrace, protecting a garden corner, or separating two areas inside your home.

Laser-cut to your specifications and made in France, the panel is crafted from a single piece of sheet metal including its solid frame. You can choose the material, thickness, and size using the configurator. Since there is no axis of symmetry, the pattern changes depending on its orientation: it is up to you to decide which shard takes centre stage.

Geometric Shards: an abstract and perforated design

The pattern combines triangles and polygons with irregular contours. The shapes seem to fragment like broken glass or fit together in a mosaic of shards. The bars separating them maintain a regular width, giving the design a strong presence. A solid frame surrounds the composition, forming a single, unified piece.

The design has no axis of symmetry. Therefore, the panel can be installed in any direction, but each orientation reveals a different composition. The perforations allow air and light to pass through while the metal shapes create a decorative screen. There is no imposed direction: just several ways to look at the same shards.

This geometric screen joins our selection of garden screen panels to bring a decorative separation to your garden or terrace area.

Choose your material for your decorative metal screen

The material gives the geometric shard privacy screen its character and determines where it can be installed. The thick bars define the pattern with precision. For a large-scale metal privacy screen, a slightly greater thickness provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains its natural grey-black hue for a graphic result. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

Whether it is a room divider, a pergola opening, or a fence section, every location has its own proportions. You specify the desired size in the configurator, and the design proportions are maintained. The irregular shapes keep their balance even as the geometric shard privacy screen adapts to your project.

Before ordering your panel, measure the area to be covered and consider the distance from which it will be viewed. If you plan to install several panels side by side, the repetition of the pattern will not look identical depending on the orientation of each piece: take your time to choose their layout. The configurator will reject sizes that are too small for the selected thickness.

Your screen thus fits perfectly into the intended space without distorting its proportions. Imagined a different design? You can also upload your own DXF to have it laser-cut.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen can dress up a fence, protect a dining area from prying eyes, or add rhythm to a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. A perforated metal outdoor privacy screen creates a visual separation while allowing air to circulate.

Indoors, the panel structures an entrance, separates two living areas, or adds a graphic decor to a room. Raw steel fits perfectly here with its natural grey-black appearance. Its non-symmetrical composition allows you to choose the orientation that best suits your support and the desired effect.

Corten steel is for outdoors only. Its patina forms over time and can run off with the rain; indoors, it would stain your walls and floors. In the garden or on a terrace, its warm tones complement the surrounding materials and plants.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not included. If you need holes pre-cut during the laser process, you can send your own file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. For stainless steel, a suitable cleaner applied in the direction of the brushing will revive the satin look. Avoid abrasive sponges and chlorine-based products. Corten patinates naturally outdoors, requiring no special care.

For your geometric shard privacy screen, choose the material, thickness, and size, then click "Configure & buy". It is up to you to choose the orientation that creates the right effect.

FAQ about the geometric shard privacy screen

Can the geometric shard privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the outdoors, where its patina can develop. Raw steel is primarily intended for indoor use, as it oxidises in humid air. The panel can thus dress up a fence or protect a terrace corner.

Can corten steel be installed indoors?

No. The rust patina of corten continues to form and can run off with humidity. Indoors, it would risk staining your walls and floors. This material is therefore for outdoors only, such as in a garden or on a terrace. For the home, choose brushed stainless steel, anodised aluminium, or raw steel depending on the desired look.

What size should I choose for a geometric screen?

The size is defined in the configurator while the design proportions are preserved. Measure the space to be covered, identify the views to be filtered, and consider the distance from which the panel will be observed. If you install several, decide on their orientation: this non-symmetrical pattern looks different depending on the direction. A template helps visualise the whole.

How do I fix this metal privacy screen panel?

The design does not feature fixing holes. The panel is mounted by its frame onto a suitable support, such as posts, a chassis, or a wall. Choose screws that match the support and the weight of the piece. The screen is supplied without accessories: screws, plugs, posts, and brackets must be provided by you.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin appearance and can be installed both inside and outside. Raw steel (2 to 20 mm) provides a natural grey-black hue and is better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but remains for outdoors only.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel is protected by a zinc layer and anodised aluminium does not rust: both are suitable for an outdoor privacy screen. For galva, a thickness of at least 1.5 mm is recommended outdoors. Aluminium is lightweight, which can facilitate installation depending on your support. Ensure your support is suitable for the weight of the chosen panel.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally enough to remove dust. For brushed stainless steel, apply a stainless steel cleaner in the direction of the brushing. Avoid abrasive sponges and chlorine products, which can mark the surface. Corten patinates naturally outdoors and requires no special care to follow its evolution.

Can I have my own design laser-cut?

Yes, you can [upload your own DXF](https://www.john-steel.com/en/uploader) for laser cutting in the desired material and thickness. This is useful if you want a personal pattern or wish to include fixing holes in the file. Ensure your design consists of connected elements and perforations suitable for cutting before submitting it.

  • Style / Theme: Geometric
Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.