Custom metal wall art - Leafy Heart
  • Custom metal wall art - Leafy Heart
  • Custom metal wall art - Leafy Heart
  • Custom metal wall art - Leafy Heart
  • Custom metal wall art - Leafy Heart
  • Custom metal wall art - Leafy Heart

Custom metal wall art - Leafy Heart

Leafy Heart metal wall art: a tree of life in flowing lines

Leafy Heart metal wall art combines the silhouette of a tree with a heart shape drawn at its centre. Its two symmetrical trunks meet in this curve, while leafy branches rise above and the roots remain visible below. The line drawing creates a balanced composition that brings a botanical presence to a wall without adding depth to the room. This metal tree of life highlights the continuous design with a dark, openwork outline.

Laser cut from a single piece, this wall decor is made to measure and can be resized to suit your project. Choose the material, thickness and size in the configurator. Made in France, the design can find a place in your home or in a reception area where you want to underline a connection with nature.

A tree of life drawn around a heart

Your eye first follows the two trunks rising from the base and curving towards each other. Their meeting forms a heart in the middle of the tree. Above, the branches spread out symmetrically and end in distinct leaves. Below, the roots extend on either side of the trunk. These are the only elements shown: a clear botanical drawing made of solid lines and open spaces.

The composition gives the design a natural yet heartfelt feel. It suits a living room, hallway or workplace, depending on the atmosphere you want to create. Since the decor is openwork, the wall colour adds contrast and lets the design breathe. This metal wall art can create a calm, graphic focal point in a reception area. The Leafy Heart metal wall art makes its mark with a simple design, wherever you place it. Find more ideas in our metal wall art collection, or explore the tree of life category. This leafy heart metal decor also works well as tree of life wall art.

Choose a metal to suit the look you want

The material shapes the look of the Leafy Heart and helps it suit its surroundings. Options depend on the material and thickness selected in the configurator. The table lists the available materials and their typical uses to help you compare.

MaterialAvailable thicknessesWhere to use it
Brushed stainless steel1 to 4 mmIndoor or outdoor use
Raw steel2 to 20 mmBest suited to indoor use
Galvanised steel1 to 3 mmIndoor, or outdoors at 1.5 mm minimum
Anodised aluminium1.5 to 2 mmIndoor or outdoor use
Corten steel1.5 mmOutdoor use only

Brushed stainless steel has a bright surface and works well with different decor styles. Raw steel keeps a simple look, while galvanised steel has a matt grey finish. Anodised aluminium is lightweight. To compare cutting options, see our guide to metal thicknesses. This metal wall decor also brings the metal tree of life design to your space, with custom leafy heart wall art sized to suit.

Choose a size to suit your wall arrangement

The design can be resized: choose the size you want in the configurator, and its proportions are preserved. This lets you adjust the space given to the tree to suit your wall, whether it is displayed on its own or among other decorative pieces. The central heart remains the main focal point, framed by leafy branches and underlined by the roots. The custom Leafy Heart fits the space you have set aside for it.

Before confirming your choice, check the available wall space and the viewing distance. Leaving clear space around the silhouette helps its lines stand out. To picture the result, mark the outline on the wall with masking tape, then view it from the places you pass most often.

The configurator matches compatible sizes and thicknesses to the material you choose. This helps keep details in the branches, leaves and roots clear while adapting the decor to the available space. The Leafy Heart metal wall art therefore keeps its proportions, even when you change its size.

Indoors or outdoors: choose where to display it

In a living room, hallway or office, the Leafy Heart adds a botanical touch and a focal point without visually covering the whole wall. On a facade or courtyard wall, materials suited to outdoor use let you display the design in the open air. Raw steel is best kept indoors, away from damp conditions. For outdoor use with galvanised steel, choose a thickness of at least 1.5 mm.

Brushed stainless steel and anodised aluminium can be installed indoors or outdoors. Corten steel is for outdoor use only: its patina changes over time and may leave marks when exposed to rain. Avoid placing it near a light-coloured finish or a floor that could be marked by water run-off.

Fitting and care

The design is cut from a single piece and has no pre-drilled fixing holes. On a sound, smooth surface, an adhesive suited to the metal and wall may work. Screw fixing is also possible, with drilling required and a method chosen to suit the material, the weight of the decor and the wall. Supplied without accessories: screws, wall plugs and spacers are not included.

For everyday care, a slightly damp soft cloth is usually enough. On brushed stainless steel, wipe in the direction of the grain; a stainless steel cleaner can help restore its appearance. Corten develops its patina outdoors. Avoid abrasive products that could mark the surface.

Give the Leafy Heart metal wall art the space it deserves. Choose your material, thickness and size, then click “Configure & buy”.

Frequently asked questions about Leafy Heart metal wall art

What does the Leafy Heart design represent?

The design shows a tree with two symmetrical trunks that meet to form a heart at the centre. Leaves fill the branches and roots appear at the base. The decor uses only these botanical shapes in an openwork outline, laser cut from a single piece of metal.

Is the design cut from a single piece?

Yes, the design is laser cut from a single piece. The trunks, branches, leaves and roots form one continuous composition, just as shown in the design. There are no pre-drilled fixing holes. You can resize the piece in the configurator while keeping the composition's proportions.

Can I choose the size of the tree wall art?

Yes, the decor is made to measure and can be resized. Select your preferred size in the configurator, which takes the material and thickness into account. To decide, measure the available space and consider how far away you will view the heart, leaves and roots. Marking the outline temporarily with masking tape can help you picture it on the wall.

How do I fix this wall decor?

The piece has no pre-drilled fixing holes. On a sound, smooth surface, you could use an adhesive suited to the metal and wall. Screw fixing requires drilling and a solution suited to the surface, weight and material. Supplied without accessories: screws, wall plugs and spacers are not included.

Which materials are suitable for outdoor use?

Brushed stainless steel and anodised aluminium are suitable for indoor or outdoor use. Galvanised steel can also be used outdoors from 1.5 mm thickness. Corten is for outdoor use only, as its patina may leave marks. Raw steel is best kept indoors, away from damp conditions.

How do I care for laser-cut metal?

A slightly damp soft cloth is enough for everyday cleaning. For brushed stainless steel, wipe in the direction of the grain to preserve the surface finish. Avoid abrasive pads and harsh products. Outdoors, corten develops its patina over time and may mark surfaces exposed to water run-off.

  • Style / Theme: Tree of Life
Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.