Custom metal wall art - Interwoven trunks
  • Custom metal wall art - Interwoven trunks
  • Custom metal wall art - Interwoven trunks
  • Custom metal wall art - Interwoven trunks
  • Custom metal wall art - Interwoven trunks
  • Custom metal wall art - Interwoven trunks

Custom metal wall art - Interwoven trunks

Interwoven trunks metal wall art: a tree of life in tangled lines

Interwoven trunks metal wall art brings a graphic presence to a wall without weighing it down with a bulky decoration. The design gathers twisted trunks and branches, white leaves picked out against a black background, and roots drawn in loops inside a circle. Follow the crossing lines from the base up to the crown, then back around the circular outline that brings the composition together.

This tree of life metal wall art is made as a single piece of metal, laser cut to order. Resize it in the configurator to suit the available space. Its openwork design lets the wall show through, so the colour of your surface becomes part of the contrast. Made in France, this design can find a place in an entrance, living room or workspace, as a housewarming gift or as a visual anchor for a room.

Interwoven trunks: a tree silhouette drawn in fine lines

The design shows a tree whose trunks cross and branches twist around one another. White leaves stand out against the black background of the product image, while the roots curl into loops inside a circle. Solid areas and fine lines create a dense centre, gathered by the circular outline. The interwoven trunks metal wall art keeps the drawing's botanical lines in view and gives the tree a distinctive silhouette.

This metal tree of life plays with solid shapes and open spaces rather than a printed image. The contrast depends on the material and the wall visible through the openings. In a simple room, it becomes a decorative focal point; near a bookcase or desk, its branches echo the lines of the furniture. This tree of life wall decor suits anyone who enjoys botanical designs and makes a thoughtful gift.

Explore more pieces in our metal wall art collection. If you would like to create a different design, you can also send us your own DXF file for a cut made to suit your project.

Brushed stainless steel, raw steel, galvanised steel, aluminium or corten: choose your material

The material gives the design a different presence and should suit the place where you plan to install it. Available thicknesses depend on the selected material and the configurator options. When comparing metal finishes, consider the light, exposure to moisture and the contrast you want against the wall.

MaterialAvailable thicknessesWhere to use it
Brushed stainless steel1 to 4 mmIndoor or outdoor use
Raw steel2 to 20 mmBest suited to indoor use
Galvanised steel1 to 3 mmIndoor, or outdoors at 1.5 mm minimum
Anodised aluminium1.5 to 2 mmIndoor or outdoor use
Corten steel1.5 mmOutdoor use only

Brushed stainless steel reflects light with a satin surface and offers good corrosion resistance. Raw steel keeps a restrained grey-black tone that emphasises the design against a pale wall. Galvanised steel has a matt appearance and a protective zinc coating. Anodised aluminium is lightweight and does not rust. Corten develops a changing patina outdoors. Find useful guidance in our metal thickness guide.

A made-to-measure tree of life for your space

An entrance wall, a living room partition or the space above a piece of furniture can all suit this circular design. The configurator lets you choose a size while keeping the original proportions. The round shape frames the tree, and the looped roots remain visible at the bottom. The interwoven trunks metal wall art can therefore be sized to suit your project.

Before choosing a size, measure the available width and consider how far away you will view the decoration. Leave some space around the circle so its details remain clear. A paper template or strips of masking tape can help you picture the footprint and find a balanced position.

Options depend on the chosen material and size. The design remains in one piece, with its interlaced lines preserved when resized.

Indoor and outdoor use: where to install interwoven trunks metal wall art

Indoors, this design can complement an entrance, living room or workspace. Brushed stainless steel and anodised aluminium add a bright note, while raw steel strengthens the graphic contrast. Galvanised steel can also work, depending on the setting and selected thickness.

Outdoors, consider a terrace wall, façade or fence after checking that the surface can take the fixing method. Brushed stainless steel and anodised aluminium suit both settings. Galvanised steel is suitable outdoors from 1.5 mm thick. Raw steel is best installed under cover, away from moisture.

Corten steel is intended for outdoor use only, where its patina forms over time. Rain can carry marks from the surface, so avoid placing it above pale cladding or a delicate floor.

Fixing and care

The design is laser cut as one piece, with no fixing holes provided. On a smooth, clean and sound surface, an adhesive suited to the weight and material may work. Screw fixing is also possible if you arrange for drilling with a method compatible with the metal and wall. Supplied without accessories: screws, wall plugs and spacers are not included. If in doubt, ask an installation professional for advice.

For routine care, remove dust with a soft cloth. If needed, wipe with a slightly damp cloth, then dry the surface. A stainless steel cleaner can refresh brushed stainless steel; wipe in the direction of the grain. Avoid abrasive pads and harsh products that could mark the metal. Corten changes naturally when installed outdoors.

Choose the material and size to suit your wall, then click “Configure & buy” to prepare your tree of life.

Frequently asked questions about interwoven trunks metal wall art

What does the interwoven trunks design show?

The design shows a tree with twisted trunks and branches. White leaves stand out against a black background in the product image, and the roots form loops inside a circle. The decoration brings these visible features together as one laser-cut piece, without adding other figures.

Can this metal wall art be installed outdoors?

Yes, provided you choose a material suited to the exposure and wall. Brushed stainless steel and anodised aluminium work indoors and outdoors. Galvanised steel can be installed outside from 1.5 mm thick. Raw steel is best suited to indoor use, while corten is intended for outdoor use only.

Can I choose the size of the wall tree?

Yes. Choose a size in the configurator, which preserves the design's proportions as it is resized. Measure the available space and view the decoration from the place where it will be seen. Leave a margin around the circle so the branches, leaves and looped roots remain easy to distinguish.

How do I fix this metal decoration to a wall?

No fixing holes are provided. Depending on the wall and material, you can bond it to a smooth, clean and sound surface with a suitable product, or arrange for holes to be drilled for screw fixing. The method depends on the piece's weight and the wall. It is supplied without accessories: screws, wall plugs and spacers are not included.

Which material should I choose for indoor use?

Brushed stainless steel has a bright appearance, anodised aluminium is lightweight, and raw steel brings a darker tone. Galvanised steel can also work indoors. Choose according to the contrast you want against your wall and the conditions in the room. Corten is intended for outdoor installation, where its patina can change over time.

Is corten suitable for interior decoration?

No. Corten is intended for outdoor use because its patina changes in the weather and may leave marks as it forms. For an indoor space, choose brushed stainless steel, anodised aluminium, raw steel or galvanised steel instead, taking the surroundings and desired finish into account.

How should I care for the metal tree of life?

Dusting with a soft cloth is usually enough. To remove a mark, use a slightly damp cloth and then dry the surface. On brushed stainless steel, you can use a suitable cleaner, wiping in the direction of the grain. Avoid harsh products and abrasive accessories to help preserve the metal's finish.

Can you laser cut a different design?

Yes, you can send a DXF file for us to assess a personal design for cutting. The drawing should account for the requirements of a laser-cut metal piece, including the areas that connect the shapes. Material, thickness and manufacturing options are selected according to the project and the options available.

  • Style / Theme: Tree of Life
Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.