Custom metal privacy screen - Art Deco Blocks
  • Custom metal privacy screen - Art Deco Blocks
  • Custom metal privacy screen - Art Deco Blocks
  • Custom metal privacy screen - Art Deco Blocks
  • Custom metal privacy screen - Art Deco Blocks

Custom metal privacy screen - Art Deco Blocks

Art deco block privacy screen: a geometric assembly

An art deco block privacy screen creates a bold graphic look using juxtaposed large rectangles and squares. Stacked chevrons, Saint Andrew's crosses, diamonds, and parallel bars share the different blocks. This perforated panel is perfect for dressing up a fence, shielding a terrace corner from prying eyes, or separating two rooms while letting light flow through.

It is laser cut to measure and made in France, as a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. Please note the design has a top and a bottom: keep the correct orientation in mind during installation, as the blocks prefer to stay in their place.

Art Deco Blocks: a perforated geometric assembly

The design brings together large rectangles and squares, each filled with a different pattern. Stacked chevrons occupy some blocks, while others feature a Saint Andrew's cross, a diamond, or parallel bars. These shapes are juxtaposed in an asymmetrical composition built with straight lines. The frame surrounds the entire piece, meaning the art deco block privacy screen is delivered as one single unit.

The overall appearance evokes a block assembly with an architectural rhythm and open areas that filter views. Light passes through the patterns, projecting lines and shapes throughout the day. The design has a specific top and bottom, which must be respected during installation to maintain the intended composition.

This art deco screen joins our selection of garden screen panels to add a graphic presence to a fence or an outdoor layout.

Choose your material for your decorative metal screen

The material gives character to your art deco block privacy screen and determines the environment it is suited for. For a large-scale metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

Material Available thicknesses Where to install
Brushed stainless steel 1 to 4 mm Indoors or outdoors
Raw steel 2 to 20 mm Preferably indoors
Galvanised steel 1 to 3 mm Indoors, or outdoors (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoors or outdoors
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains its natural grey-black hue, while galvanised steel, protected by zinc, features a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

Whether it is a pergola opening, a section of fencing, or a room divider, every location requires a specific size. You enter the desired dimensions in the configurator, and the proportions of the pattern are automatically preserved. The blocks thus maintain their balance in the composition, whether they cover a single section or accompany a larger layout.

Before ordering your panel, measure the space to be covered and consider the distance from which you will view it. For several panels side by side, use identical sizes to ensure visual continuity. The configurator will block sizes that are too small for the chosen thickness, as the patterns need a bit of room to remain sharp.

Your custom privacy screen adapts to your project and its constraints. Have you already designed another pattern? You can also upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen can structure a terrace, dress up a fence, or hide a garden storage area. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor metal screen then draws its geometric blocks against a wall, a hedge, or a facade.

Indoors, the panel gently separates an entrance from a living room, defines a home office corner, or dresses up a partition without blocking all the light. Raw steel fits perfectly here with its grey-black appearance, highlighting the architectural design of the rectangles and squares.

Corten steel is for outdoors only. Its patina forms over time and can run with the rain; it would stain walls and floors indoors. Outside, its warm tones blend beautifully with brick, vegetation, and garden materials.

Fixing and maintenance

The design does not include fixing holes: installation is planned via the frame, depending on the support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If your project requires specific holes, you can integrate them into your own file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. For stainless steel, a suitable cleaner applied in the direction of the brushing will revive the satin look. Corten patinates naturally outdoors; there is no need to plan a routine for it, it already has its own schedule.

For your art deco block privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». All that's left is to let the blocks find their place.

FAQ about the art deco block privacy screen

Can the art deco block privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the outdoors and patinates outside. Raw steel is primarily intended for indoors, as it oxidises in humid air. This panel can thus dress up a fence, a terrace, or a garden wall.

Can corten steel be installed indoors?

No. The rust patina that protects corten continues to form and can run with humidity. Indoors, it would risk staining your walls, floors, or nearby textiles. Corten is therefore for outdoors only, for example in the garden or on a facade. For a separation inside the house, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen?

The size is selected in the configurator, which preserves the proportions of the pattern. Measure the space to be covered and think about the viewing distance. To align several copies, keep the same size to extend the rhythm of the blocks. A cardboard template or masking tape will help you visualise their presence before ordering.

How do I fix a metal privacy screen?

The design does not include fixing holes. The panel is installed by its frame onto posts, a chassis, a wall, or a pergola, using screws suitable for the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets are not provided. Simply identify the top and bottom orientation during installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin look and is suitable both inside and out. Raw steel (2 to 20 mm) keeps a grey-black hue, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but is reserved for the outdoors.

Galva or anodised aluminium for an outdoor screen?

Both are suitable for outdoors. Galvanised steel is protected by a zinc layer; a thickness of at least 1.5 mm is recommended outside. Anodised aluminium is lightweight and does not rust, with available thicknesses from 1.5 to 2 mm. The choice depends on the desired look and the constraints of your support.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is sufficient in most cases. For brushed stainless steel, use a stainless steel cleaner in the direction of the brushing to revive the surface. Avoid abrasive sponges and chlorine products, which can mark the metal. Corten patinates naturally outdoors and requires no special care.

Can I have my own design laser cut?

Yes. You can send your DXF file to john-steel.com for laser cutting in the material and thickness of your choice. This is useful for creating a matching pattern or planning fixing holes according to your project. The file must be prepared in a format suitable for cutting; the online configurator will guide you in submitting your design.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.