Custom metal privacy screen - Art Deco Stained Glass
  • Custom metal privacy screen - Art Deco Stained Glass
  • Custom metal privacy screen - Art Deco Stained Glass
  • Custom metal privacy screen - Art Deco Stained Glass
  • Custom metal privacy screen - Art Deco Stained Glass

Custom metal privacy screen - Art Deco Stained Glass

Art deco stained glass privacy screen: a finely perforated diamond lattice

The art deco stained glass privacy screen creates a dense and luminous atmosphere, much like a stained glass window rendered in metal. Its tight lattice of interlocking diamonds in various sizes filters views while allowing light to flow through. It is the perfect choice to structure a terrace, dress up a fence, or separate two indoor spaces without closing them off completely.

Laser-cut to your specifications and made in France, it consists of a single piece of sheet metal including its frame. You can choose the material, thickness, and size using our configurator. The symmetrical design is balanced in both directions: no family arguments over which side goes at the top.

Art Deco Stained Glass: an interlocking diamond lattice

This pattern brings together diamonds of all sizes, nested in a tight lattice that evokes the lead lines of a traditional stained glass window. In the centre, a cross of small diamonds forms a regular grid. Large nested diamonds occupy the top and bottom, while the sides feature columns of diamonds strung on rods. The fine lines give the design its dense, sophisticated appearance.

The art deco stained glass privacy screen is symmetrical from top to bottom and left to right. Its frame surrounds the design to create a unique piece, without any pre-drilled fixing holes. The numerous openings let light and air pass through; their repetition casts a geometric shadow, ensuring your room doesn't feel like a police interrogation scene from a noir film.

This art deco screen joins our selection of garden screen panels, designed to dress up an exterior with a perforated motif.

Choose your decorative metal screen material

The material gives its character to your art deco stained glass privacy screen and determines where it can be installed. For a large metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

MaterialAvailable ThicknessesInstallation
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains its natural grey-black hue for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

Whether it is a pergola opening, a room divider, or a section of fencing, every location has its own proportions. You choose the size in the configurator, and the proportions of the motif are preserved. The diamonds remain balanced, from the central grid to the side columns.

Before ordering your custom privacy screen, measure the area to be covered and consider the viewing distance. If you are installing several panels side by side, use the same size so that the design forms a regular, continuous set. The configurator will block sizes that are too small for the chosen thickness to ensure a clean laser cut.

Your panel thus adapts perfectly to your project. Have you imagined a different pattern or do you need to integrate fixing holes? You can also upload your own DXF for custom cutting.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen defines a dining area, dresses up a fence, or protects a terrace from prying eyes. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor privacy screen placed in front of a wall or a hedge allows its geometric pattern to stand out against the landscape.

Indoors, the panel can separate an entrance from the living room, structure a home office, or dress up a partition. Raw steel fits these uses perfectly with its natural grey-black appearance; stainless steel and aluminium are also suitable depending on the desired finish.

Corten steel is for outdoors only, as its patina can run with the rain and stain walls or floors. Outside, its warm tones blend beautifully with brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not included. To include holes during the cutting process, you can send your own file.

Maintenance is simple: a slightly damp microfibre cloth is usually enough. For stainless steel, a suitable cleaner applied in the direction of the brushing restores the shine. Anodised aluminium and galvanised steel are cleaned with a soft cloth. Corten develops its patina outdoors over time.

For your art deco stained glass privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». Your geometric decor is ready to be installed.

FAQ about the art deco stained glass privacy screen

Can the art deco stained glass privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc coating. Corten is reserved for the exterior and patinates outdoors. Raw steel is primarily intended for indoor use, as it oxidises in humid air. Your panel can thus dress up a fence, a terrace, or a garden wall.

Can corten steel be installed indoors?

No. The rust patina of corten continues to form and can run with humidity. Indoors, it would risk staining walls, floors, and textiles. This material is therefore for outdoors only, such as in the garden or on a terrace. For a separation inside the home, please choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen panel?

The size is selected in the configurator, which maintains the proportions of the motif. Measure the space to be covered and consider the distance from which you will view the diamond lattice. If several panels follow one another, keep a consistent size to extend the design regularly. A cardboard template placed in the intended location helps you visualise the result.

How do I fix this metal privacy screen?

The design does not feature fixing holes. The panel is generally mounted by its frame onto posts, a chassis, or a wall, using screws chosen based on the support and weight. It is supplied without accessories: screws, plugs, posts, and brackets must be provided. To integrate holes, you can submit your own DXF file.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and is suitable for both indoors and outdoors. Raw steel (2 to 20 mm) provides a natural grey-black finish, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but remains for outdoors only.

Galva or anodised aluminium for outdoor use?

Both materials are suitable for the exterior. Galvanised steel is protected by a zinc layer and can be installed outdoors from 1.5 mm thickness. Anodised aluminium is lightweight and rust-proof, offered in 1.5 to 2 mm. The choice depends mainly on the desired aesthetic and the thickness available for your project.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally sufficient. For brushed stainless steel, use a stainless steel cleaner and wipe in the direction of the brushing. Anodised aluminium and galvanised steel are cleaned with a soft cloth. Corten patinates outdoors without any particular treatment. Avoid abrasive sponges and chlorinated products, which can mark the surfaces.

Can I have my own design laser cut?

Yes. You can send your DXF file via john-steel.com for laser cutting in the material and thickness of your choice. This is useful for creating a personal design or planning fixing holes adapted to your installation. Ensure the file correctly represents the desired cut-outs before submitting it. The configurator will then guide you through the material selection.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.