Custom metal privacy screen - Art Deco Diamonds
  • Custom metal privacy screen - Art Deco Diamonds
  • Custom metal privacy screen - Art Deco Diamonds
  • Custom metal privacy screen - Art Deco Diamonds
  • Custom metal privacy screen - Art Deco Diamonds

Custom metal privacy screen - Art Deco Diamonds

Art deco diamond privacy screen: a dense geometric lattice

The art deco diamond privacy screen creates a dense lattice where diamonds interlock with perfect regularity. Its numerous, relatively small openings filter views more effectively than more open panels, while still allowing air and light to circulate. It is the ideal choice for preserving the privacy of a terrace, dressing up a fence, or defining an interior space.

Laser-cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. Its symmetry in both directions offers true freedom of orientation during installation: here, the diamonds keep their cool, even when turned upside down.

Art Deco Diamonds: a dense decorative metal screen

The pattern combines several scales of diamonds. On the sides, columns of small double diamonds (one diamond inside another) alternate with single diamonds. At mid-height, large interlocking diamonds form facing chevrons. Regular vertical bars connect the shapes and structure the overall design.

The panel is symmetrical from top to bottom and left to right. The openings are numerous but small: this lattice obscures more than open patterns and is perfect when you wish to maintain your privacy. Light passes through a tight mesh, projecting a geometric shadow without turning your room into a shadow puppet theatre.

This art deco screen joins our selection of garden panels to create a decorative screen in the garden or around a living area.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material highlights the lattice of your art deco diamond privacy screen differently. A light finish makes the openings stand out, while raw steel gives the design a darker, more industrial presence. For a large metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel has a satin appearance and resists corrosion well. Raw steel retains its natural grey-black hue, while galvanised steel is protected by its zinc layer and maintains a matte grey finish. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your project

Whether it is for a fence, a pergola opening, or a room divider: every location requires a specific size. You enter the desired dimensions in the configurator and the proportions of the pattern are preserved. The diamonds remain balanced, without stretching or compressing the design.

Before ordering your art deco diamond privacy screen, measure the space to be filled and consider the distance from which it will be viewed. If you plan to install several panels side by side, choose the same size to extend the lattice regularly. The configurator rejects sizes that are too small for the selected thickness to ensure the feasibility of the laser cut.

Your custom privacy screen adapts to the intended space, with its frame integrated into the piece. Do you have another pattern in mind? You can also upload your own DXF to have it cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal privacy screen helps preserve the privacy of a dining area, dresses up a fence, or structures a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel are suitable for outdoor use. With its small openings, the panel filters views and defines the space without closing it off completely.

Indoors, this garden screen panel can separate an entrance from the living room, dress up a wall, or mark the boundary between two zones without building a solid partition. Raw steel is well-suited for this use, with its natural grey-black appearance. The regular mesh brings a graphic rhythm to both sides of the separation.

Corten steel is for outdoors only. Its rust patina forms progressively and can run off with rain; indoors, it would risk staining walls and floors. Outside, its warm tones blend easily with brick, wood, and plants.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame, depending on your support and the weight of the panel, using screws suitable for posts, a chassis, or a wall. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If your project requires holes, you can include them in a personal DXF file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On brushed stainless steel, use a suitable cleaner in the direction of the brushing to revive the satin look. Corten patinates naturally outdoors and requires no special treatment.

For your art deco diamond privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». Your privacy takes a very geometric shape.

FAQ about the art deco diamond privacy screen

Can the art deco diamond privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel, anodised aluminium, and galvanised steel are suitable for outdoors. Corten is reserved for this use and patinates outside. Raw steel is intended for indoors, as it can oxidise in humid air. With its small and numerous openings, this panel helps filter views on a terrace or along a fence.

Can corten be installed indoors?

No. Corten develops a rust patina that continues to evolve and can run off with humidity. Indoors, it would risk staining your walls and floors. This material is therefore for outdoors only, for example in a garden or on a facade. For a separation inside the home, choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for this screen panel?

The size is selected in the configurator and the proportions of the lattice are preserved. Measure the space you wish to fill, then consider the distance and the height of the views to be filtered. If you align several panels, keep the same size so that the lines extend regularly. A cardboard template can help visualise the space before ordering.

How do I fix a metal privacy screen?

The design contains no fixing holes. Installation is done via the frame on a suitable support, such as posts, a chassis, or a wall, with screws chosen according to the support and the weight of the piece. The panel is supplied without accessories: screws, wall plugs, and posts are not provided. Ensure you have a support suitable for your installation.

Brushed stainless or raw steel: which to choose?

Brushed stainless steel, available from 1 to 4 mm, offers a satin look and can be installed both inside and outside. Raw steel, from 2 to 20 mm, retains its grey-black hue and is better suited for indoors. Anodised aluminium is lightweight and does not rust. Corten takes on a warm patina but remains for outdoors only. The choice depends on the location and the desired look.

Are galva or aluminium suitable for outdoors?

Yes. Galvanised steel has a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for outdoor installation. Both materials are offered in several thicknesses depending on the material. Choose based on your preferred finish and the constraints of your support.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally enough to remove dust. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Avoid abrasive sponges and chlorinated products, which can mark certain surfaces. Corten evolves naturally outdoors; its patina is part of its appearance and requires no regular treatment.

Can I have my own design cut?

Yes. You can send your own DXF file to john-steel.com to have a design cut in the material and thickness available that suits your project. This is useful for creating a different pattern or integrating fixing holes into your plan. Check that the file correctly represents the desired contours before submitting it. The configurator then allows you to choose the available options.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.