Custom metal privacy screen - Art Deco Beams
  • Custom metal privacy screen - Art Deco Beams
  • Custom metal privacy screen - Art Deco Beams
  • Custom metal privacy screen - Art Deco Beams
  • Custom metal privacy screen - Art Deco Beams

Custom metal privacy screen - Art Deco Beams

Art deco beam privacy screen: a fine diamond mesh

An art deco beam privacy screen creates a graphic separation without closing off your space. Fine rays emanate from small points and intersect with large chevrons, forming a mesh of slender diamonds. Repeated in rows across the entire height, this delicate design dresses a garden, filters a view, or structures a room while letting light flow through.

Laser cut to your specifications and made in France, the panel is crafted from a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. Its lines are symmetrical from left to right, but the design has a top and a bottom: make sure to keep the correct orientation during installation, as the rays won't tell you if you've flipped it upside down!

Art Deco Beams: a pattern of rays and chevrons

Numerous thin bars compose the motif. Beams of rays start from small points, then cross with large chevrons. Their intersections create a succession of slender diamonds. The beams repeat in rows over the entire height in a regular rhythm. A solid frame surrounds the design and forms a single piece with the panel.

The thinness of the bars gives the art deco beam privacy screen a delicate presence. The cut-outs create a play of lines and transparency: the panel filters views without turning the space into a solid wall. The pattern is symmetrical from left to right, but not from top to bottom. Therefore, it has a top and a bottom that must be respected during installation.

This decorative metal screen joins the perforated models in our garden panels section, adding a graphic rhythm to any exterior.

Brushed stainless, raw steel, galva, alu or corten: choose your material

The material differently highlights the rays and chevrons of your art deco beam privacy screen. For a large-scale metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

Material Available Thicknesses Where to install
Brushed stainless steel 1 to 4 mm Indoors or outdoors
Raw steel 2 to 20 mm Preferably indoors
Galvanised steel 1 to 3 mm Indoors, or outdoors (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoors or outdoors
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion well. Raw steel keeps its natural grey-black hue, ideal for an industrial vibe. Galvanised steel is protected by its zinc layer and takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

A pergola opening, a fence, or a room divider: every location requires a specific size. You enter the desired dimensions in the configurator, and the proportions of the design are preserved so that the diamonds remain slender and the beams well-balanced.

Before ordering your art deco beam privacy screen, identify the space to be dressed and the main vantage point. Also, consider the direction of the design: the rows have a top and a bottom that must be carefully aligned. If you plan to place several panels side by side, use the same size to extend the pattern regularly. The configurator will reject sizes that are too small for the chosen thickness.

Your custom privacy screen thus adapts to your project. Have you already drawn another design? You can also upload your own DXF to have it laser cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal screen can protect a dining area from prying eyes or add rhythm to a fence. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. Placed in front of a hedge or a brick wall, the outdoor privacy screen lets its openwork design dialogue with the surroundings.

Indoors, the panel creates a light separation between two areas or dresses a wall without blocking the light. Raw steel fits perfectly here with its dark appearance. Its fine beams structure the view; they don't require a manual, just the correct top-bottom orientation during installation.

Corten steel is for outdoors only, as its rust patina forms over time and can run off with the rain. Indoors, it would risk staining walls and floors. Outside, its warm tones blend naturally with brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, or a wall, using screws suitable for the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If your project requires specific holes, you can send your own file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On brushed stainless steel, a suitable cleaner applied in the direction of the brushing revives the satin look. Corten patinates naturally outdoors and requires no special treatment.

For your art deco beam privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». Such a fine mesh deserves a prime spot.

FAQ about art deco beam privacy screen

Can the art deco beam privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten is reserved for outdoors and patinates over time. Raw steel is intended for indoors, as it can oxidise in humid air. The panel is thus suitable for a fence or a terrace corner.

Can corten steel be used indoors?

No. The protective patina of corten is a rust that continues to form and can run with humidity. Indoors, it would risk staining walls and floors. This material is therefore for outdoors only. For a separation inside the home, choose brushed stainless steel, anodised aluminium, or raw steel, depending on the look you want.

What size should I choose for a screen panel?

The size is chosen in the configurator, and the design proportions are preserved. Measure the space to be dressed, identify the fixing points, and consider the distance from which you will view the panel. For a series, choose an identical size to extend the mesh. Remember to orient the rows with the top of the pattern facing up.

How do I fix a metal privacy screen?

The design does not have fixing holes. Installation is generally organised via the frame, on posts, a chassis, or a wall, with screws adapted to the support and the weight of the piece. The panel is supplied without accessories: screws, plugs, and posts must be provided. Position the motif in its top-bottom direction before fixing.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin look and can be installed both inside and outside. Raw steel (2 to 20 mm) retains its grey-black hue and is better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina, reserved for outdoors.

Can galva or alu stay outdoors?

Yes. Galvanised steel is protected by its zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and also supports outdoor use. These two materials are suitable for a garden or terrace privacy screen. Choose based on the desired finish and available thickness for your project.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is suitable for routine maintenance. For brushed stainless steel, apply a stainless steel cleaner in the direction of the brushing. Avoid abrasive sponges and chlorinated products, which can mark the surface. Corten requires no particular maintenance: its patina forms naturally outdoors, but may leave traces around the panel.

Can I have my own design laser cut?

Yes. You can [upload your own DXF](https://www.john-steel.com/en/uploader) to have it laser cut in the material and thickness adapted to your project. This is useful for creating a matching panel or integrating openings specified in your file. Ensure you provide a usable drawing for cutting and identify the top-bottom direction if your pattern has one.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.