Custom metal privacy screen - Art Deco Rosette
  • Custom metal privacy screen - Art Deco Rosette
  • Custom metal privacy screen - Art Deco Rosette
  • Custom metal privacy screen - Art Deco Rosette
  • Custom metal privacy screen - Art Deco Rosette

Custom metal privacy screen - Art Deco Rosette

Art deco rosette privacy screen: a solar and symmetrical design

This art deco rosette privacy screen captures the eye with its solar and symmetrical pattern. At its heart, a large rosette combines a circle crossed by a horizontal bar, a ring of rays, and overlapping semi-circles. At the top and bottom, radiating half-suns complement the bands of oblique bars on the sides. Its bold lines provide strong character while allowing light to filter through.

Laser cut to your specifications and made in France, the panel is crafted as a single piece of sheet metal including its frame. You can select the material, thickness, and size within the configurator. Whether placed in an entrance, a garden, or on a terrace, this rosette brings a little ray of sunshine even when the weather is feeling grumpy.

Art Deco Rosette: a decorative metal screen with solar motifs

At the centre of the panel, a large circle is intersected by a horizontal bar. Surrounding this, a ring of rays and overlapping semi-circles form the rosette. Two radiating half-suns extend the design at the top and bottom, while bands of oblique bars frame the composition on the sides. The thick lines and solid frame give the entire piece a sharp, defined presence.

The pattern is symmetrical from left to right, creating a balanced solar composition. The cut-outs filter views and let light circulate: the art deco rosette privacy screen defines a space without closing it off completely. Depending on the time of day, the cut-out rays cast shadows on the ground that echo the design. The rosette knows how to hold a conversation without saying a word.

This panel joins our selection of garden screen panels, perfect for dressing up a fence or adding depth to an outdoor area.

Choose your material for your custom privacy screen

The material gives your art deco rosette privacy screen its character and helps determine its ideal location. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains its natural grey-black hue for an industrial feel. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

A pergola opening, a section of fencing, or a divider between two rooms: every location has its own proportions. You enter the desired size in the configurator, and the proportions of the motif are preserved. The rosette remains perfectly centred and the half-suns keep their place in the composition.

Before ordering your custom privacy screen, measure the area to be covered and consider the distance from which you will view the panel. For several pieces side by side, keep the size identical so that the pattern repeats regularly. The configurator will block sizes that are too small for the chosen thickness: the rosette needs a bit of room to shine.

Your screen thus adapts to your project. Have you imagined a different pattern? You can also upload your own DXF to have it laser cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal privacy screen can dress up a fence, protect a dining area from prying eyes, or structure a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor privacy screen in stainless steel or aluminium maintains its appearance through the seasons, while the cut-outs allow air to flow.

Indoors, the panel creates a light separation between an entrance and a living room, dresses a wall, or structures an office nook without blocking all the light. Raw steel fits perfectly here with its grey-black finish, which highlights the radiating shapes.

Corten steel is reserved for outdoors only. Its rust patina forms over time and can run with the rain; indoors, it would stain walls and floors. In the garden, its warm tones blend beautifully with brick, wood, and plants.

Fixing and maintenance

The design does not include fixing holes. Installation should be planned according to your support (posts, frame, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not included. The frame allows for a fixing method adapted to your installation.

Maintenance is simple: a slightly damp microfibre cloth is usually enough. For stainless steel, a suitable cleaner applied in the direction of the brushing revives the shine. Corten patinates outdoors without requiring any special care.

For your art deco rosette privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». The light will do the rest.

FAQ about the art deco rosette privacy screen

Can the art deco rosette privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten is designed for the outdoors and patinates naturally. Raw steel is best reserved for indoors, as it oxidises in humid air. The rosette can thus adorn a fence, a terrace, or a garden wall.

Can corten steel be used indoors?

No. Corten protects itself with a layer of rust that continues to form and can run with moisture. Indoors, it would risk staining walls, floors, and textiles. This material is for outdoors only, such as in a garden or on a terrace. For an indoor separation, choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen panel?

The size is selected in the configurator, and the proportions of the motif are maintained. Measure the space to be covered, identify what you wish to hide, and consider the viewing distance. If aligning several panels, using an identical size helps maintain a regular rhythm. A cardboard template or masking tape can help you visualise the result.

How do I fix a metal privacy screen?

Fixing depends on the support and the panel weight. The design does not have pre-drilled holes: the panel is generally mounted by its frame onto posts, a chassis, or a wall, using appropriate screws. The piece is supplied without accessories; screws, plugs, posts, and brackets must be provided based on your specific installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a luminous look and is suitable both inside and out. Raw steel (2 to 20 mm) maintains a graphic grey-black hue and is intended primarily for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina but is for outdoors only.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for a fence or terrace. Both materials allow you to install your rosette outdoors, with different finishes: matte grey for galva, lighter for aluminium.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally sufficient to remove dust. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Corten requires no treatment: its patina forms outdoors over time. Avoid abrasive sponges and chlorine-based products, which could mark some surfaces.

Can I have my own design laser cut?

Yes. You can send your DXF file via john-steel.com for laser cutting in the desired material and thickness. This is useful if your project requires a different motif or specific fixing holes within the design. The file must be prepared according to the configurator's guidelines before submission.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.