Custom metal privacy screen - Art Deco Jewel
  • Custom metal privacy screen - Art Deco Jewel
  • Custom metal privacy screen - Art Deco Jewel
  • Custom metal privacy screen - Art Deco Jewel
  • Custom metal privacy screen - Art Deco Jewel

Custom metal privacy screen - Art Deco Jewel

Art deco jewel privacy screen: a precious pattern with openwork lines

The art deco jewel privacy screen creates a geometric composition reminiscent of a gemstone set in metal. Two large framed diamonds dominate a small solid diamond; below, elongated ogival arches respond to the fine parallel curves that curl around the sides. It is perfect for dressing up a terrace, filtering a view in the garden, or separating two living areas without blocking the light.

Laser cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. Please note that the design has a top and a bottom: ensure the correct orientation before installation, as jewels do not like being turned upside down.

Art Deco Jewel: set diamonds and slender arches

The pattern combines two large framed diamonds, each placed above a small solid diamond, resembling set precious stones. Beneath these shapes, elongated ogival arches stretch the composition. On the sides, bands of fine parallel curves wrap around the central lines. The design repeats twice over the height, blending solid shapes with very fine bars.

The art deco jewel privacy screen is symmetrical from left to right, but not from top to bottom: it therefore has a top and a bottom that must be respected during installation. Once installed correctly, the alternation of solid and open areas filters views while allowing air and light to circulate. It structures a space without closing it off completely.

This decorative metal screen joins our range of garden panels, ideal for dressing up a fence or creating a decorative screen in your garden.

Choose your material for your custom privacy screen

The material gives the art deco jewel privacy screen its character and determines where you can install it. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesWhere to install
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look and resists corrosion well. Raw steel retains its natural grey-black hue, while galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Lightweight anodised aluminium does not rust.

A custom privacy screen tailored to your space

Whether for a pergola opening, a section of fencing, or a room divider, you can choose the size of your custom privacy screen in the configurator. The proportions of the motif are preserved: the diamonds, arches, and fine curves maintain their ratios to ensure the overall balance remains perfect.

Before ordering your art deco jewel privacy screen, measure the space to be filled and consider the distance from which it will be viewed. If several panels are placed side by side, plan for consistent sizes to maintain a regular rhythm. The configurator blocks dimensions that are too small for the chosen thickness, as the fine bars need their proper space.

Your panel thus adapts to your project. Would you like to start from a different design? You can also upload your own DXF to have it laser cut.

Indoor or outdoor installation

Outdoors, this metal privacy screen can dress up a fence, protect a dining area from prying eyes, or add relief to a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel resist rain. An outdoor privacy screen in stainless steel or aluminium maintains its appearance throughout the seasons.

Indoors, the panel creates a light separation between an entrance and a living room, structures an office corner, or dresses up a staircase without depriving the room of light. Raw steel fits perfectly here with its natural grey-black finish.

Corten steel is reserved for outdoors only, as its rust patina forms over time and can run with the rain. It would stain walls and floors: keep it outdoors, where its warm tones blend beautifully with brick and greenery.

Fixing and maintenance

The design does not include fixing holes. Installation is carried out via the frame, depending on the support and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If you require holes integrated into the design, please send your own DXF file.

Maintenance is simple: a slightly damp microfibre cloth is sufficient for daily care. For stainless steel, use a suitable cleaner in the direction of the brushing to revive its appearance. Corten patinates naturally outdoors, requiring no special care.

For your art deco jewel privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». It is up to you to decide where to make these metal stones shine!

FAQ about the art deco jewel privacy screen

Can the art deco jewel privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for outdoors and patinates naturally. Raw steel is better suited for indoors, as it oxidises in humid air. The panel can thus dress up a terrace, a fence, or a garden wall.

Can corten steel be used indoors?

No. The rust patina that protects corten continues to form and can run with humidity. Indoors, it would risk staining walls, floors, and textiles. Corten is therefore reserved for outdoors, such as in the garden or on a terrace. For an indoor separation, choose brushed stainless steel, anodised aluminium, or raw steel instead.

What size should I choose for a screen panel?

The size is selected in the configurator, and the proportions of the motif are preserved. Measure the space to be filled, identify the views to be filtered, and consider the viewing distance. If you align several panels, keep the sizes consistent. A cardboard template can help you visualise the result before confirming your choice.

How do I fix this metal privacy screen?

The design does not have fixing holes. The panel is mounted by its frame onto a suitable support, such as posts, a chassis, or a wall, with screws chosen based on the support and weight. It is supplied without accessories: screws, plugs, posts, and brackets are not provided. Remember to respect the top and bottom of the motif.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin appearance and is suitable both inside and out. Raw steel (2 to 20 mm) retains its grey-black hue and is best for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but is reserved for outdoors.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel has a zinc layer for protection; for outdoor use, choose a thickness of at least 1.5 mm. Anodised aluminium does not rust and is also suitable for outdoor installation while remaining lightweight. Both materials are ideal for a garden panel exposed to rain, depending on the thickness available in the configurator.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually enough. For brushed stainless steel, a stainless steel cleaner applied in the direction of the brushing helps revive the satin look. Avoid abrasive sponges and chlorine products, which may mark the surface. Corten patinates naturally outdoors and requires no particular maintenance.

Can I have my own design laser cut?

Yes. You can upload your DXF file to john-steel.com to have it laser cut in the desired material and thickness. This is useful for creating a personal motif or planning fixing holes tailored to your project. The dedicated configurator allows you to submit the drawing and specify the characteristics of your piece.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.