Custom metal privacy screen - Art Deco Emblem
  • Custom metal privacy screen - Art Deco Emblem
  • Custom metal privacy screen - Art Deco Emblem
  • Custom metal privacy screen - Art Deco Emblem
  • Custom metal privacy screen - Art Deco Emblem

Custom metal privacy screen - Art Deco Emblem

Art deco emblem privacy screen: a bold geometric design

An art deco emblem privacy screen adds character to your spaces without closing them off. Bold broken lines create chevrons, sharp diamonds, and stepped patterns that converge towards a central diamond, forming a large stylised emblem. Its angular cut-outs filter views and allow light to flow through, whether in the garden or inside your home.

Laser cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. Please note that the design has a specific top and bottom: keep the correct orientation in mind during installation, as the central diamond won't act as a compass.

Art Deco Emblem: an angular and perforated motif

The design combines wide broken lines in chevrons, pointed diamonds, and stepped patterns. All these elements converge toward a central diamond to compose a large stylised emblem. At the top, two points form a V; at the bottom, a solid diamond is framed by chevrons. The thick lines create large angular openings with a sharp graphic presence.

The panel is symmetrical from left to right, but not from top to bottom: it has a distinct top and bottom that must be respected during installation. Its marked lines create a play of solids and voids that maintains visual openness while softening direct sightlines. It fits perfectly into a contemporary layout or complements an Art Deco inspired decor.

This decorative metal screen joins our selection of garden panels to bring a graphic structure to a fence or an outdoor area.

Choose your material for your custom privacy screen

The material gives its character to your art deco emblem privacy screen and determines where you can install it. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains the natural grey-black hue of the metal for a bold finish. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, rust-proof, and easy to handle.

A custom privacy screen tailored to your space

A pergola opening, a section of a fence, or a room divider: every location has its own proportions. You enter the desired size in the configurator, and the motif's proportions are preserved. The chevrons, V-points, and central diamond thus maintain their graphic balance.

Before ordering your art deco emblem privacy screen, measure the space to be dressed and consider the distance from which you will view the panel. For several panels side by side, use identical sizes to ensure regular continuity. The configurator will block sizes that are too small for the chosen thickness, as the large cut-outs need enough surrounding material to remain sturdy.

Your custom piece adapts to your project. Do you want a different motif or specific openings? You can also upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen can protect a dining area from prying eyes, dress up a fence, or structure a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. A perforated metal outdoor privacy screen also allows air to circulate while creating a clear separation.

Indoors, the panel creates a light separation between two areas, dresses up an entrance, or adds rhythm to a wall without blocking all the light. Raw steel fits perfectly here with its natural grey-black appearance. Since the motif has a top and bottom, think about its orientation before fixing it: the chevrons won't flip themselves over.

Corten steel is for outdoors only. Its rust patina forms over time and can run with the rain; it would stain walls and floors indoors. In the garden, its warm tones pair beautifully with brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not included. If you require holes pre-cut during the laser process, please send your own file.

Maintenance is simple: a slightly damp microfibre cloth is usually enough. For stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Corten patinates naturally outdoors and requires no special care.

For your art deco emblem privacy screen, choose the material, thickness, and size, then click "Configure & buy". The central diamond is waiting for its wall or garden.

FAQ about the art deco emblem privacy screen

Can the art deco emblem privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is designed for the outdoors and patinates over time. Raw steel is best reserved for indoors, as it can oxidise in humid air. The panel can thus dress up a fence, terrace, or dining area.

Can corten steel be installed indoors?

No. Corten develops a rust patina that continues to evolve and can run with humidity. Indoors, it risks staining walls, floors, and textiles. This material is therefore for outdoors only, such as in a garden or on a facade. For an indoor separation, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for this screen panel?

The size is selected in the configurator, which preserves the motif's proportions. Measure the area to be dressed and consider the viewing distance and the views you wish to filter. To align several panels, an identical size will provide more regular continuity. You can mock up the area with cardboard or masking tape before confirming your choice.

How do I fix the metal panel?

The design does not feature fixing holes. Installation is carried out via the frame, on posts, a chassis, a wall, or a pergola, using screws chosen based on the support and the weight of the piece. The panel is supplied without accessories: screws, plugs, posts, and brackets must be provided. Also, respect the top and bottom of the motif during installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a luminous look and is suitable both inside and out. Raw steel (2 to 20 mm) keeps a natural grey-black hue, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) takes on a warm patina but remains for outdoors only.

Galva or anodised aluminium for an outdoor screen?

Both are suitable for outdoor use. Galvanised steel is protected by a zinc layer and maintains a matte grey finish; for this use, a thickness of at least 1.5 mm is recommended. Anodised aluminium is lightweight and does not rust. Choose based on the desired aesthetic and the specific technical requirements of your installation.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally sufficient to remove dust. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Avoid abrasive sponges and chlorine-based products that can mark the surface. Corten evolves naturally outdoors and does not require any particular maintenance.

Can I have my own design laser cut?

Yes. You can [upload your own DXF](https://www.john-steel.com/en/uploader) to have a design cut in the material and thickness of your choice. This is an option for creating a personal motif or planning specific fixing holes for your project. The file must be prepared in DXF format to be processed by the cutting configurator.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.