Custom metal privacy screen - Art Deco Bouquets
  • Custom metal privacy screen - Art Deco Bouquets
  • Custom metal privacy screen - Art Deco Bouquets
  • Custom metal privacy screen - Art Deco Bouquets
  • Custom metal privacy screen - Art Deco Bouquets

Custom metal privacy screen - Art Deco Bouquets

Art deco bouquet privacy screen: rhythmic sprays of fine lines

An art deco bouquet privacy screen brings a graphic and airy rhythm to your space. Fine ray bundles spring from a single point and open upwards like small bouquets, aligned in staggered rows. Between them, diamonds and large arcs intersect in a scale-like pattern. This perforated panel filters views while letting light flow through.

It is laser cut to measure and made in France, crafted as a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. The pattern is symmetrical from left to right, but it has a specific top and bottom: keep the orientation of the bouquets in mind during installation.

Art Deco Bouquets: a decorative metal screen of rays and arcs

The design features bundles of fine rays, each flaring out from a point. They align in staggered rows, giving the panel a steady, rhythmic movement. Between these sprays, diamonds and large arcs cross to form scales. The lines are numerous yet remain slender, ensuring the overall look feels light and balanced.

Symmetry is achieved from left to right. However, the pattern cannot be flipped upside down: the bouquets open upwards, and this orientation must be respected during fitting. The cut-outs allow air and light to circulate while softening the line of sight. The frame is integrated into the piece, bordering the design perfectly.

This art deco bouquet privacy screen joins our selection of garden panels. Its graphic design blends seamlessly into a fence or can structure a room without closing it off completely.

Brushed stainless, raw steel, galva, alu or corten: choose your material

The material gives your art deco bouquet privacy screen its character and determines where it can be installed. For a large metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

Material Available thicknesses Installation
Brushed stainless steel 1 to 4 mm Indoor or outdoor
Raw steel 2 to 20 mm Preferably indoor
Galvanised steel 1 to 3 mm Indoor, or outdoor (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoor or outdoor
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin, luminous look and resists corrosion. Raw steel retains its natural grey-black hue. Galvanised steel, protected by its zinc layer, has a discreet matte grey finish. Anodised aluminium is lightweight and rust-proof.

A custom privacy screen tailored to your space

Whether for a fence, a pergola opening, or a decorative divider, you select the panel size in the configurator. The proportions of the design are preserved: the rays, arcs, and diamonds maintain their balance. Take the measurements of your space and double-check the pattern direction, with the bouquets facing up.

If you plan to install several panels side by side, use the same size so the rows continue with regularity. Consider the angle from which you will view the screen and what you wish to hide. The configurator prevents sizes that are too small for the chosen thickness to ensure the fine details remain sturdy.

Your custom privacy screen thus adapts perfectly to your project. Already designed a different pattern? You can also upload your own DXF for laser cutting.

Indoor or outdoor privacy screen: where to install it

Outside, this metal screen can dress up a fence, protect a terrace corner from prying eyes, or structure a garden area. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor privacy screen in perforated metal allows air to circulate while its rays cast a delicate shadow.

Indoors, the panel creates a light separation between two areas or adds a graphic accent to an entrance. Its fine lines let light pass through, and its frame neatly defines the composition. Raw steel is well-suited for this use with its natural grey-black appearance.

Corten steel is for outdoors only, as its rust patina forms over time and can run off with the rain. Indoors, it would stain walls and floors. Outside, its warm tones pair beautifully with brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame, onto posts, a chassis, or a wall, using screws suited to the support and the panel's weight. Supplied without accessories: screws, wall plugs, posts, and brackets must be provided by you. Verify the panel direction before fixing it so the bouquets open upwards.

For routine maintenance, a slightly damp microfibre cloth is usually enough. For brushed stainless steel, use a suitable cleaner in the direction of the brushing to revive its glow. Corten patinates naturally outdoors and requires no special care. Just a bit of patience while it finds its final colour.

For your art deco bouquet privacy screen, choose the material, thickness, and size, then click 'Configure & buy'. The bouquets are ready to bloom in your decor.

FAQ about the art deco bouquet privacy screen

Can the art deco bouquet privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the outdoors and patinates naturally. Raw steel is intended for indoor use, as it can oxidise in humid air. You can install this perforated panel on a fence or near a terrace.

Can corten steel be used indoors?

No. The rust patina that protects corten continues to form and can run with humidity. Indoors, it would risk staining your walls and floors. This material is therefore for outdoors only, where its warm tones blend easily into the garden. For an indoor separation, choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is selected in the configurator, which preserves the design proportions. Measure your available space and identify what you want to hide, considering the distance from which you will view the panel. For several aligned screens, choose the same size to extend the bouquet rows regularly. A cardboard template can help you visualise the result.

How do I fix a metal privacy screen?

The design of this model does not have fixing holes. The panel is mounted by its frame onto posts, a chassis, or a wall, using screws adapted to the support and its weight. Remember to check the orientation before installation: the bouquets must open upwards. The panel is supplied without fixing accessories.

Brushed stainless or corten: which material to choose?

The choice depends on the location and the desired look. Brushed stainless steel (1 to 4 mm) provides a satin, luminous finish, both inside and out. Corten (1.5 mm) develops a warm patina but is for outdoors only. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Raw steel (2 to 20 mm), in grey-black, is better for indoors.

Galva or anodised aluminium for an outdoor screen?

Both materials are suitable for outdoors. Galvanised steel has a zinc layer for protection; for outdoor installation, a thickness of at least 1.5 mm is recommended. Anodised aluminium is lightweight, does not rust, and is available in 1.5 to 2 mm. Choose based on the desired look and your support constraints, keeping the panel weight in mind.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually sufficient to remove dust. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Corten patinates on its own outdoors and requires no particular maintenance. Avoid abrasive sponges and chlorine-based products, which could mark the metal surfaces.

Can I have my own design laser cut?

Yes, you can send your DXF file via john-steel.com for laser cutting in the available materials and thicknesses. This is useful if you wish to create a different pattern or include specific fixing holes for your project. Ensure you provide a file that complies with the preparation guidelines indicated during upload.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.