Custom metal privacy screen - Art Deco Fletching
  • Custom metal privacy screen - Art Deco Fletching
  • Custom metal privacy screen - Art Deco Fletching
  • Custom metal privacy screen - Art Deco Fletching
  • Custom metal privacy screen - Art Deco Fletching

Custom metal privacy screen - Art Deco Fletching

Art deco fletching privacy screen: vertical and graphic lines

The art deco fletching privacy screen creates a light separation, paced by long vertical rods and geometric points. Interlocking chevrons evoke arrows and fletching, while small diamonds are strung along the pattern like beads. The large open spaces allow air and light to pass through: the panel can dress up a fence, protect a terrace corner, or structure a room without closing it off.

Laser cut to your specifications and made in France, it consists of a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. The design is symmetrical from left to right, but it does have a top and a bottom: this detail must be respected during installation.

Art Deco Fletching: fine lines of chevrons and beads

Long parallel vertical rods cross the panel from top to bottom. Interlocking chevrons unfold across these regular lines, drawing arrowheads and fletching. Small diamonds are threaded along the motif, resembling beads. The solid frame surrounds this openwork composition and emphasises its geometry.

The design is symmetrical from left to right, but not from top to bottom: the panel therefore has a top and a bottom to be respected during installation. Its large vertical openings lighten the separation and filter views without completely blocking the sight. The straight, fine lines give the garden an orderly look; even the fletching stays on course.

This decorative metal screen joins our selection of garden panels to dress up a fence or create a decorative screen.

Choose your material for your custom privacy screen

The material gives character to your art deco fletching privacy screen and determines where you can install it. Stainless steel highlights the lines with its satin appearance, while raw steel gives them a darker presence. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

Material Available thicknesses Where to install
Brushed stainless steel 1 to 4 mm Indoors or outdoors
Raw steel 2 to 20 mm Preferably indoors
Galvanised steel 1 to 3 mm Indoors, or outdoors (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoors or outdoors
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin, bright look that resists corrosion well. Raw steel retains the natural grey-black hue of the metal, perfect for an industrial feel. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, does not rust, and is easy to handle.

A custom privacy screen tailored to your space

A pergola opening, a section of fence, or a separation between two areas: every location has its own proportions. You enter the desired size in the configurator and the proportions of the motif are preserved. The rods remain vertical and the chevrons keep their rhythm, so you don't have to act as a Sunday surveyor.

Before ordering your art deco fletching privacy screen, identify the area to be dressed and measure the available space. Also consider the distance from which you will view the panel and, for several aligned panels, keep a consistent size to maintain a regular rhythm. The configurator rejects sizes that are too small for the chosen thickness.

Your custom privacy screen thus adapts to your project. Already have a design in mind? You can also upload your own DXF to have it laser cut.

Indoor or outdoor installation

Outdoors, this metal privacy screen can pace a fence, preserve the privacy of a dining area, or dress up a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. An outdoor privacy screen placed in front of a wall or a hedge lets its long vertical lines structure the decor.

Indoors, the panel creates a light separation between an entrance and a living room, or delimits an office corner without darkening the room. Raw steel finds its place here with its natural grey-black finish. The openwork brings structure while keeping the spaces connected.

Corten steel is for outdoors only. Its rust patina forms over time and can run with the rain: indoors, it would stain walls and floors. In the garden, its warm tones complement brick and greenery perfectly.

Fixing and maintenance

The design does not include fixing holes: installation is planned according to your support (posts, frame, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. The panel is fixed by its frame; ensure you orient the top and bottom correctly.

Maintenance is simple: a slightly damp microfibre cloth is sufficient. For stainless steel, a stainless steel cleaner applied in the direction of the brushing revives the shine. Corten patinates on its own, asking for nothing in return.

For your art deco fletching privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». The lines are ready to take their place in your home.

FAQ about the art deco fletching privacy screen

Can the art deco fletching privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for outdoors and patinates outside. Raw steel is best kept indoors, as it oxidises in humid air. The panel can thus dress up a terrace or pace a fence.

Can corten steel be used indoors?

No. Corten is protected by a layer of rust that continues to form and can run with humidity. Indoors, it would stain your walls, floors, and textiles. It is therefore for outdoors only, for example in the garden or on a terrace. For an indoor separation, choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is chosen in the configurator and the proportions of the motif are preserved. Identify what you wish to hide, measure the available space, and consider the distance from which the panel will be seen. If you align several, a consistent size helps maintain a regular rhythm. A cardboard template or masking tape can help visualise the result.

How do I fix a metal privacy screen?

The design does not have fixing holes. The panel is fixed by its frame onto posts, a chassis, or a wall, with screws suitable for the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets must be provided. Remember to respect the top and bottom of the motif during installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and is suitable both inside and out. Raw steel (2 to 20 mm) draws the motif in a grey-black hue, mainly for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but remains for outdoors only.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel is protected by a zinc layer and is suitable for outdoors from 1.5 mm thickness. Anodised aluminium does not rust and also withstands outdoor conditions; it is lightweight, which facilitates installation. Both materials allow you to enjoy the lines of the motif on a fence or near a terrace.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is sufficient in most cases. For brushed stainless steel, use a suitable cleaner in the direction of the brushing to revive its satin appearance. Corten patinates on its own and requires no treatment. Avoid abrasive sponges and chlorinated products, which may mark the metal surfaces.

Can I have my own design laser cut?

Yes. You can send your DXF file to john-steel.com: the design will be laser cut in the material and thickness of your choice. This is useful for creating a panel matching your project or including fixing holes in your own motif. Bending services are also offered to both individuals and professionals on the site.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.