Custom metal privacy screen - Art Deco Portico
  • Custom metal privacy screen - Art Deco Portico
  • Custom metal privacy screen - Art Deco Portico
  • Custom metal privacy screen - Art Deco Portico
  • Custom metal privacy screen - Art Deco Portico

Custom metal privacy screen - Art Deco Portico

Art deco portico privacy screen: a graphic openwork arch

An art deco portico privacy screen creates a decorative entrance without closing off your space. At the centre, a large horseshoe arch frames a four-pointed star, reminiscent of a portico entrance. Large concentric arcs radiate upwards and outwards, while smaller arcs open at the base of the panel. The thick, sparse lines leave wide openings, making it perfect for dressing up a terrace, filtering a view, or separating two rooms while letting light flow through.

Laser cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. The pattern is symmetrical from left to right but has a distinct top and bottom: please ensure the correct orientation during installation, as the star is not intended to stand on its head.

Art Deco Portico: a central arch and wide openings

At the heart of the design, the large horseshoe arch surrounds a four-pointed star, evoking a classic portico. Around it, large concentric arcs stretch towards the top and sides, while several smaller arcs open at the bottom of the pattern. The lines are bold and few in number. The solid frame surrounds the design, forming a single piece of metal.

The wide openings give the panel a clear, legible design and allow air and light to pass through. The pattern is symmetrical from left to right, but not from top to bottom; therefore, it has a specific orientation to be respected during installation. This ensures the arch remains above its supporting arcs. This decorative metal screen filters prying eyes without turning your terrace into a mystery chamber.

This Art Deco style joins our selection of garden screen panels, ideal for dressing up a fence or composing a decorative privacy shield.

Choose your material for your custom privacy screen

The material gives character to your art deco portico privacy screen and determines the best location for it. For a large-scale metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

Material Available thicknesses Where to install
Brushed stainless steel 1 to 4 mm Indoors or outdoors
Raw steel 2 to 20 mm Preferably indoors
Galvanised steel 1 to 3 mm Indoors, or outdoors (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoors or outdoors
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains the natural grey-black hue of the metal, perfect for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, rust-proof, and easy to handle.

A custom privacy screen tailored to your space

Whether it is a pergola opening, a section of fencing, or a room divider: every location has its own proportions. You specify the desired size in the configurator, and the proportions of the motif are preserved. The arch, star, and arcs maintain their ratios so that the portico remains instantly recognisable.

Before ordering your art deco portico privacy screen, measure the area to be dressed and consider the viewing distance. If you plan to install several panels side by side, choose the same size for a consistent look. The configurator will block sizes that are too small for the chosen thickness to ensure the structural integrity of the metal parts.

Your custom piece thus adapts perfectly to your project. Do you have a different design in mind? You can also upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen can add rhythm to a fence, protect a dining area from view, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor screen placed against a brick wall or greenery makes the arc design pop.

Indoors, the panel creates a light separation between two areas, dresses up an entrance, or structures a room without blocking the light. Raw steel fits perfectly here with its grey-black finish, while brushed stainless steel and anodised aluminium are also suitable for these uses.

Corten steel is for outdoors only. Its rust patina forms over time and can run with the rain; it would stain walls and floors indoors. Outside, its warm tones pair beautifully with brick walls and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame, depending on your support (posts, frame, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you require holes to be pre-cut, please send your own file.

Maintenance is simple: a slightly damp microfibre cloth is enough. For stainless steel, a stainless steel cleaner applied in the direction of the brushing restores the shine. Corten patinates outdoors without requiring any special care; your cloth can therefore stay comfortably in your drawer.

For your art deco portico privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». The arch is ready to set the scene.

FAQ about the art deco portico privacy screen

Can the art deco portico privacy screen go outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten is specifically designed for the outdoors and patinates naturally. Raw steel is best reserved for indoors, as it oxidises in humid air. The panel can thus dress up a fence or protect a terrace area.

Can corten steel be used indoors?

No. The rust patina of corten continues to develop and can run with humidity. Indoors, it would risk staining your walls, floors, or textiles. This material is therefore for outdoors only, such as in the garden or on a facade. For an indoor separation, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for this screen panel?

The size is selected in the configurator, and the design proportions are maintained. Measure the space to be dressed, then consider the viewing distance and the height of the views you wish to filter. The motif has a top and a bottom: plan its orientation in your project. To visualise the result, a cardboard template or masking tape can help.

How do I fix a metal privacy screen?

The design does not include fixing holes. The panel is installed by its frame onto posts, a chassis, a wall, or a pergola, using screws suitable for the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets must be provided by you.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin look and is suitable both inside and out. Raw steel (2 to 20 mm) provides a strong grey-black finish, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina, reserved for outdoors.

Are galva or anodised alu suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and also supports outdoor use. Both materials are suitable for a garden screen panel, with different finishes: matte grey for galva, anodised look for aluminium.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is sufficient in most cases. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Avoid abrasive sponges and chlorinated products, which can mark the surface. Corten patinates naturally outdoors and requires no particular maintenance.

Can I have my own design laser cut?

Yes. You can send your DXF file to john-steel.com: it will be laser cut in the material and thickness of your choice. This is useful for designing a matching motif or planning fixing holes adapted to your installation. The file must respect the cutting constraints indicated during upload.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.