Custom metal privacy screen - Art Deco Sheaf
  • Custom metal privacy screen - Art Deco Sheaf
  • Custom metal privacy screen - Art Deco Sheaf
  • Custom metal privacy screen - Art Deco Sheaf
  • Custom metal privacy screen - Art Deco Sheaf

Custom metal privacy screen - Art Deco Sheaf

Art deco sheaf privacy screen: rays in full bloom

An art deco sheaf privacy screen brings a breath of fresh air to your room divider while creating a bold graphic focal point. Thick, long lines fan out from a central bottom point, resembling a sheaf of rays. At the top, a large V framed by chevrons balances the small stepped corners at the bottom. With few lines and wide openings, light continues to flow freely through your space.

This perforated panel is laser cut to measure and made in France, crafted as a single piece of sheet metal including its frame. You can select the material, thickness, and size within the configurator. While the design is symmetrical from left to right, it has a distinct top and bottom: please ensure the correct orientation during installation, as the sheaf doesn't grow upside down.

Art Deco Sheaf: a radiant and open decorative metal screen

The pattern is organised around a central bottom point. Long, thick lines fan outwards and rise towards the top of the panel. They compose a broad and clear sheaf of rays without overcomplicating the details. In the upper section, a large V is framed by chevrons, while small steps occupy the bottom corners. The frame surrounds these cut-outs and forms a single integrated piece with the panel.

The design is symmetrical from left to right, but not from top to bottom; it has a specific orientation to be respected during fitting. The wide openings allow air and light to circulate, while the metal lines filter prying eyes. This art deco sheaf privacy screen is among the most airy panels in the series: it defines your space without turning it into a secret vault.

You can also find it in our garden panels section, along with other ideas to dress up an exterior or create a decorative separation.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material gives your art deco screen its character and determines where it can be installed. The large open spaces make the chosen metal highly visible: a light finish highlights the rays, while a darker look makes them stand out against a light background. For larger panels, a slightly thicker gauge provides better stability, where available for the selected material.

MaterialAvailable thicknessesWhere to install
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains its natural grey-black hue for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and rust-proof.

A custom privacy screen tailored to your space

Whether it is a fence to rhythm, a dining area to shield from view, or an interior partition to define: every location has its own proportions. Simply enter the desired size in the configurator and the proportions of the motif are preserved. The rays keep their breadth and the upper V remains perfectly positioned, regardless of the final size.

Before ordering your art deco sheaf privacy screen, measure the area to be dressed and consider the distance from which it will be viewed. If you plan to install several panels side by side, keep the same size to extend the design consistently. The configurator will block sizes that are too small for the chosen thickness: even a sheaf needs a bit of room to bloom.

Your custom privacy screen thus adapts to your project, and not the other way around. Do you have a specific design in mind? You can also upload your own DXF to have it laser cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal privacy screen can dress up a fence, delimit a terrace, or filter views in the garden. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor privacy screen with wide openings maintains a light presence, with rays standing out against brick, wood, or greenery.

Indoors, the panel creates a light separation between two areas, structures an entrance, or decorates a wall without blocking the light. Raw steel fits perfectly here with its natural appearance. Choose your support and material based on the location: the decor can be airy, but the installation requires thought.

Corten steel is for outdoors only. Its rust patina forms over time and can run off with the rain; indoors, it would stain walls and floors. In the garden, its warm tones pair beautifully with brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. To integrate holes during the cutting process, you may upload your own file.

Maintenance is simple: a slightly damp microfibre cloth is sufficient. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Corten patinates on its own outdoors; it doesn't need any special instructions to achieve its characteristic look.

For your art deco sheaf privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». The rays are ready to find their place in your home.

FAQ about the art deco sheaf privacy screen

Can the art deco sheaf privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten is reserved for outdoors and patinates naturally. Raw steel is intended for indoors as it oxidises in humid air. The wide openings of the sheaf filter views without completely closing off a terrace or garden.

Can corten steel be used indoors?

No. Corten develops a rust layer that continues to form and can run with humidity. Indoors, this would stain walls and floors. This material is therefore for outdoors only, such as in a garden or on a facade. For an indoor separation, please choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is selected in the configurator, which maintains the motif's proportions. Measure the space and consider the viewing distance. The sheaf extends from its central bottom point: ensure its orientation matches your installation. A cardboard template or masking tape can help you visualise the result before ordering.

How do I fix this metal privacy screen?

The design has no fixing holes. The panel is mounted by its frame onto posts, a chassis, a wall, or a pergola, using screws suited to the support and the weight of the piece. It is supplied without accessories: screws, plugs, and posts are not included. Remember to respect the top and bottom of the motif during installation.

Brushed stainless or corten: which material to choose?

Choose based on location and desired look. Brushed stainless steel (1 to 4 mm) has a satin finish and suits both indoors and outdoors. Corten (1.5 mm) develops a warm patina and is for outdoors only. Anodised aluminium is lightweight, while raw steel provides a grey-black look best suited for interiors.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel is protected by zinc and is suitable for outdoors from 1.5 mm thickness. Anodised aluminium does not rust and also supports outdoor installation. Both options are great for dressing up a fence or terrace. Choose the thickness offered in the configurator based on the material and panel size.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is ideal for regular cleaning. For brushed stainless steel, a specific product applied in the direction of the brushing helps revive the satin look. Corten patinates outdoors without any intervention. Avoid abrasive sponges and chlorinated products, which can mark the surface. Gentle cleaning is usually enough.

Can I have my own design laser cut?

Yes. You can upload your DXF file to john-steel.com for laser cutting in your choice of material and thickness. This is a practical solution if your project requires a different composition or pre-planned fixing holes. Bending services are also available for both individuals and professionals directly on the website.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.