Custom metal privacy screen - Art Deco Javelins
  • Custom metal privacy screen - Art Deco Javelins
  • Custom metal privacy screen - Art Deco Javelins
  • Custom metal privacy screen - Art Deco Javelins
  • Custom metal privacy screen - Art Deco Javelins

Custom metal privacy screen - Art Deco Javelins

Art deco javelin privacy screen: slender and rhythmic lines

The art deco javelin privacy screen creates a graphic separation without closing off your space. Four columns of vertical rods feature rings, cross-hatched diamonds, crossed circles, and chevron fletchings. These long, slender openings allow light to flow through while filtering views, inspired by the geometric spirit of decorated javelins.

Laser cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size via the configurator. Whether it dresses up a fence, structures a terrace, or separates two rooms, its vertical lines know how to keep their cool, even when the garden gets hectic.

Art Deco Javelins: four columns of openwork design

The pattern of the art deco javelin privacy screen is organised into four columns of vertical rods. Each rod is adorned with rings, cross-hatched diamonds, crossed circles, and chevron fletchings. These elements evoke ornate javelins, with fine lines and long openings that accentuate the height of the panel. The solid frame surrounds the design and is formed as a single piece with it.

The motifs are offset from one column to the next, so the eye moves from one rod to the next without encountering a too-strict repetition. This decorative metal screen filters views while letting air and light pass through. It has a top and a bottom, which must be respected during installation; it is therefore better to identify the direction before breaking out the tools.

This art deco screen joins our selection of garden panels to dress up an outdoor space with a fine, vertical design.

Choose your material for your custom privacy screen

The material gives character to your art deco javelin privacy screen and determines where it can be installed. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

The brushed stainless steel offers a satin, luminous appearance and resists corrosion well. Raw steel retains its natural grey-black hue, while galvanised steel, protected by zinc, provides a discreet matte grey. Lightweight anodised aluminium does not rust.

A custom privacy screen tailored to your space

A fence, a pergola opening, or a separation between two zones: every project requires a suitable format. You choose the size in the configurator; the proportions of the motif are preserved so that the columns and their elements maintain their balance. The design thus remains consistent with your space, without you having to recalculate the details.

Before ordering your garden screen panel, measure the opening and consider the height of the views you wish to filter. If you are installing several panels side by side, an identical size facilitates visual continuity. The configurator excludes sizes that are too small for the chosen thickness, ensuring the fine lines maintain their structural integrity.

Your custom privacy screen adjusts to your layout. Do you want a different design or openings specifically thought for your project? You can also upload your own DXF for a personalised cut.

Indoor or outdoor: where to install your screen

Outdoors, this metal privacy screen can add rhythm to a fence, protect a dining area from prying eyes, or dress up a pergola. Brushed stainless steel, anodised aluminium, and galvanised steel are suitable for the exterior. An outdoor privacy screen placed in front of a wall or a hedge highlights its openwork columns without turning the garden into a fortress.

Indoors, the panel separates an entrance from the living room, structures an office nook, or provides a decorative screen while preserving light. Raw steel is well-suited for these uses with its dark and sober appearance; stainless steel and aluminium offer a more luminous presence.

Corten steel is for outdoor use only. Its patina forms over time and can run during rain; it would stain walls and floors indoors. Outdoors, its warm tones blend perfectly with brick, stone, and plants.

Fixing and maintenance

The design does not include any fixing holes. Installation is planned via the frame, on posts, a chassis, a wall, or a pergola, using screws suitable for the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On stainless steel, a suitable product applied in the direction of the brushing helps revive the satin look. Corten patinates outdoors over time; there is no need to remind it of its schedule, it follows it all by itself.

For your art deco javelin privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The columns are ready to take their place in your decor.

FAQ about the art deco javelin privacy screen

Can the art deco javelin privacy screen be used outdoors?

Yes, depending on the material chosen. Brushed stainless steel and anodised aluminium resist rain, as does galvanised steel thanks to its zinc protection. Corten is reserved for the exterior and patinates over time. Raw steel is primarily intended for indoor use, as it can oxidise in humid air. The art deco javelin privacy screen can thus dress up a fence or structure a terrace area.

Can corten steel be installed indoors?

No. The corten patina continues to form and can run with humidity. Indoors, it would risk staining walls and floors. This material is therefore reserved for the exterior, for example in the garden, on a facade, or near a terrace. For your interior decoration, prefer brushed stainless steel, anodised aluminium, or raw steel depending on the desired look.

What size should I choose for this privacy screen?

The size is selected in the configurator, which preserves the proportions of the design. Measure the space to be equipped and identify the views you wish to filter. Also consider the height of the posts or support, as well as the distance from which you will see the columns. A cardboard template helps visualise the panel before confirming your choice.

How do I fix the metal privacy screen?

The panel does not have fixing holes. It is installed by its frame on posts, a chassis, or a wall, using screws suitable for the support and the weight of the piece. The frame is part of the same sheet metal piece as the motif. The panel is supplied without accessories: screws, wall plugs, and posts must be provided.

Brushed stainless steel or raw steel: which material to choose?

Brushed stainless steel, available from 1 to 4 mm, has a satin appearance and is suitable both indoors and outdoors. Raw steel, from 2 to 20 mm, keeps a grey-black hue and is used primarily indoors. Anodised aluminium is lightweight and does not rust; corten develops a warm patina, only outdoors. The right choice depends on the location and the expected result.

Galvanised or anodised aluminium for outdoor use?

Both can work outdoors. Galvanised steel has a protective zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium is lightweight and does not rust, with available thicknesses from 1.5 to 2 mm. Choose based on the matte grey look of the galvanised steel or the appearance of aluminium, as well as your support constraints.

How do I maintain a javelin privacy screen?

A slightly damp microfibre cloth is suitable for routine maintenance. For brushed stainless steel, use a stainless steel cleaner if necessary and wipe in the direction of the brushing. Avoid abrasive sponges and chlorinated products, which can mark the surface. Corten evolves outdoors with its patina and requires no particular cleaning to maintain its appearance.

Can I have my own design laser cut?

Yes. You can submit your DXF file on john-steel.com to have your design laser cut in the chosen material and thickness. This is useful if your project requires a specific composition or fixing holes integrated into the file. Simply check that the design is suitable for cutting and the intended use before sending it.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.