Custom metal privacy screen - Art Deco Diadem
  • Custom metal privacy screen - Art Deco Diadem
  • Custom metal privacy screen - Art Deco Diadem
  • Custom metal privacy screen - Art Deco Diadem
  • Custom metal privacy screen - Art Deco Diadem

Custom metal privacy screen - Art Deco Diadem

Art deco diadem privacy screen: a precious and graphic motif

The art deco diadem privacy screen features a geometric composition designed to capture the eye. Two large diamonds framed by chevrons occupy the upper corners, while a double diamond sits proudly in the centre. Vertical rods punctuated by round beads and lower chevrons complete this openwork panel, which filters views without closing off your space.

Laser-cut to your specifications and made in France, the panel is crafted as a single piece of sheet metal including its solid frame. You can choose the material, thickness, and size using our configurator. Please note that the design has a specific top and bottom: remember to respect the installation direction, as the diadem does not like being upside down.

Art Deco Diadem: a decorative metal screen with bold lines

The design is organised into three columns. In the two upper corners, large diamonds are encircled by chevrons, reminiscent of the gemstones in a diadem. In the centre, a large diamond contains a second, smaller one. On either side, vertical rods each carry two small solid round beads. At the bottom, chevrons point upwards like fletching. Thick lines and a solid frame provide a strong structure to the entire piece.

The motif is symmetrical from left to right, but not from top to bottom: the diamonds are at the top and the chevrons at the bottom. Therefore, the panel has a distinct top and bottom to be respected during installation. The openwork metal allows light to flow through while creating a decorative separation. One detail to remember before you reach for the drill: the design contains no pre-drilled fixing holes.

This art deco screen joins our range of garden screen panels, among the openwork panels perfect for dressing up an exterior space.

Brushed stainless, raw, galva, aluminium or corten: choose your material

The material gives your art deco diadem privacy screen its character and determines where it can be installed. For a large-scale metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look and excellent corrosion resistance. Raw steel retains the natural grey-black hue of the metal. Galvanised steel, protected by its zinc layer, provides a discreet matte grey. Lightweight anodised aluminium does not rust.

A custom privacy screen tailored to your space

Whether for a fence, a pergola, or a room divider inside the house, every location has its own proportions. Enter your desired size in the configurator: the proportions of the drawing are preserved so that the diamonds, beads, and chevrons maintain their visual balance.

Before ordering your custom privacy screen, measure the area to be covered and identify the direction of the motif. The top must remain at the top during installation. If you plan to install several panels side by side, choose the same size to maintain a regular rhythm. The configurator will block dimensions that are too small for the selected thickness.

This allows you to adapt the art deco diadem privacy screen to your specific project. If you prefer a different design, you can also upload your own DXF to have it laser-cut.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen can dress up a fence, preserve the privacy of a dining area, or add rhythm to a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel are all suitable for the exterior. An outdoor privacy screen in stainless steel or aluminium will maintain its appearance throughout the seasons.

Indoors, the panel separates two areas without completely partitioning them, or adds a graphic touch to an entrance hall. Raw steel pairs perfectly with industrial decor, and its dark finish highlights the openwork patterns.

Corten steel is for outdoors only. Its patina forms over time and can run with the rain; it would risk staining walls and floors inside. Outdoors, its warm tones naturally complement brickwork and greenery.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the solid frame, onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided separately.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On stainless steel, a suitable cleaner applied in the direction of the brushing revives the satin look. Corten patinates naturally outdoors; it requires no specific maintenance.

For your art deco diadem privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The diadem is ready to crown your space.

FAQ about the art deco diadem privacy screen

Can the art deco diadem privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the exterior and patinates outdoors. Raw steel is intended for indoor use, as it oxidises in humid air. The panel can thus dress up a terrace or a fence.

Can corten steel be installed indoors?

No. The rust patina of corten continues to form and can run with humidity. Indoors, it would risk staining walls and floors. This material is for outdoors only, for example in the garden or on a terrace. For a room divider inside the house, please choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for this privacy screen?

The size is selected in the configurator, and the proportions of the motif are preserved. Measure the space to be covered, then take into account the posts or the intended support. Also note the direction of the design: diamonds must stay at the top and chevrons at the bottom. A cardboard template helps visualise the panel before ordering.

How do I fix the metal privacy screen?

The design contains no fixing holes. Installation is generally done via the solid frame, onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the piece. The panel is supplied without accessories: screws, plugs, and posts are not provided. Be sure to check the orientation before fixing it.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a luminous appearance and is suitable for both indoor and outdoor use. Raw steel (2 to 20 mm) offers a natural grey-black hue, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina, reserved for outdoors.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and its surface is also suitable for outdoor applications. Both materials allow the panel to be installed outside. Check the support and fixing method adapted to your project.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally sufficient for cleaning. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Avoid abrasive sponges, which could mark the surface. Corten patinates naturally outdoors and requires no specific maintenance. Regular dusting is enough for indoor panels.

Can I have my own design laser-cut?

Yes. You can send your DXF file via john-steel.com to have it laser-cut in the material and thickness of your choice. This is a great solution for creating a personal motif or including specific fixing holes in the design. Folding services are also available for both individuals and professionals directly on the site.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.