Custom metal privacy screen - Art Deco Ziggurat
  • Custom metal privacy screen - Art Deco Ziggurat
  • Custom metal privacy screen - Art Deco Ziggurat
  • Custom metal privacy screen - Art Deco Ziggurat
  • Custom metal privacy screen - Art Deco Ziggurat

Custom metal privacy screen - Art Deco Ziggurat

Art deco ziggurat privacy screen: geometric stepped patterns

The art deco ziggurat privacy screen brings a rhythmic energy to your space without closing it off completely. Stepped chevrons stack like the levels of a ziggurat, framing large central hexagons. In the corners, diamonds and fans are filled with fine parallel hatching. The design blends wide solid areas with very thin bars to filter views while allowing light to flow through freely.

Laser cut to your specifications and made in France, this panel is crafted from a single piece of sheet metal including its frame. You can select the material, thickness, and size using our configurator. Its left-to-right symmetry makes integration effortless, and the pattern repeats twice over the height. It is the perfect way to add a touch of architectural flair to a simple garden corner.

Art Deco Ziggurat: a stepped chevron decorative metal screen

The design is organised around large central hexagons, framed by superimposed stepped chevrons. In the corners, diamonds and fans are filled with fine parallel hatching. The wide solid sections structure the panel, while the thin bars provide a sharp graphic contrast. The frame surrounds the entire composition and is formed as a single piece with the pattern.

The panel is symmetrical from left to right, and the motif repeats twice vertically. The cut-outs create a regular mesh that lets air and light pass through while softening direct lines of sight. These geometric lines fit perfectly into a fence, a room divider, or as wall decor, ensuring your space does not feel like a closed box.

You can find this art deco screen in our garden panels section, specifically designed to dress up your outdoor areas with perforated panels.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material changes both the final look and the possible location of your art deco ziggurat privacy screen. For a large metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

MaterialAvailable thicknessesInstallation location
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous appearance that resists corrosion well. Raw steel retains the natural grey-black hue of the metal for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, rust-proof, and easy to handle.

A custom privacy screen tailored to your space

Whether it is for a pergola opening, a fence section, or a divider between two rooms, choose your desired size in the configurator. The proportions of the design are preserved: the stepped chevrons, hexagons, and hatched details maintain their balance. The configurator automatically accounts for limits related to the chosen thickness.

Before ordering your art deco ziggurat privacy screen, identify the area to be dressed and the distance from which you will view the panel. If you are installing several side by side, keeping the same format ensures a regular repetition. A temporary template can help you visualise the footprint and the play of light before confirming your choice.

Your custom privacy screen thus adapts perfectly to your project. Already designed a personal pattern? You can also upload your own DXF to have it laser cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal screen can add rhythm to a fence, protect a dining area from prying eyes, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. An outdoor privacy screen placed in front of a brick wall or greenery highlights the geometry of the design.

Indoors, the panel creates a light separation between two rooms, structures an entrance, or dresses a wall without blocking light. Raw steel is suitable for these uses with its natural grey-black look; stainless steel and aluminium provide a brighter presence.

Corten steel is reserved for outdoors only. Its rust patina forms over time and can run off with rain; indoors, it would stain walls and floors. In the garden, its warm tones pair beautifully with brick and plants.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, a wall, or a pergola, using screws suited to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you.

Maintenance is simple: a slightly damp microfibre cloth is usually enough. For brushed stainless steel, use a stainless steel cleaner and wipe in the direction of the brushing. Corten patinas naturally outdoors; there is no need to keep a detailed logbook of its evolution.

For your art deco ziggurat privacy screen, choose the material, thickness and size, then click on « Configure & buy ». Its stepped chevrons are ready to structure your space.

FAQ about the art deco ziggurat privacy screen

Can the art deco ziggurat privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for outdoors and patinas naturally. Raw steel is intended for indoor use, as it oxidises in humid air. This panel can thus enhance a fence or protect a terrace area.

Can corten steel be used indoors?

No. Corten protects itself with a layer of rust that continues to form and can run off with moisture. Indoors, it would risk staining walls, floors, and textiles. This material is therefore for outdoors only, such as in a garden or on a facade. For an indoor separation, choose brushed stainless, anodised aluminium, or raw steel.

What size should I choose for a privacy screen panel?

The size is selected in the configurator, and the proportions of the motif are preserved. Identify the space to be dressed, the views to be filtered, and the distance from which you will see the panel. If aligning several, keep the same format for a regular rhythm. A cardboard template or masking tape helps visualise the result.

How do I fix a metal privacy screen?

The design does not feature fixing holes. The panel is mounted by its frame onto posts, a chassis, a wall, or a pergola, using screws adapted to the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets are not provided. Plan your mounting system based on the location.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and suits both indoor and outdoor use. Raw steel (2 to 20 mm) keeps its natural grey-black hue and is best kept indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina but is for outdoors only.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel benefits from a zinc layer and is suitable for outdoors from 1.5 mm thickness. Anodised aluminium does not rust and remains lightweight, making it practical for mounting on posts or frames. Both materials withstand rain. The choice depends on the desired look: matte grey for galva, lighter for anodised aluminium.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally sufficient to remove dust. On brushed stainless steel, use a suitable cleaner in the direction of the brushing to revive the satin look. Avoid abrasive sponges and chlorinated products. Corten patinas naturally outdoors and requires no special treatment; just account for potential runoff.

Can I have my own design laser cut?

Yes. You can send your DXF file via john-steel.com to have it laser cut in the material and thickness of your choice. This is useful for creating a matching design or planning specific openings for your project. Ensure the file is usable before sending. The configurator also allows you to choose a size adapted to your space.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.