Custom metal privacy screen - Art Deco Pearls
  • Custom metal privacy screen - Art Deco Pearls
  • Custom metal privacy screen - Art Deco Pearls
  • Custom metal privacy screen - Art Deco Pearls
  • Custom metal privacy screen - Art Deco Pearls

Custom metal privacy screen - Art Deco Pearls

Art deco pearl privacy screen: a play of openwork pendants

The art deco pearl privacy screen dresses a space without closing it off. Slender vertical bars carry small solid round pearls; between them, tapered triangles and diamonds interlock across three staggered levels, resembling pendants. Its fine lines and numerous narrow openings filter views while allowing light to flow freely.

Laser-cut to your specifications and made in France, it is crafted as a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. The pattern is symmetrical from left to right but has a distinct top and bottom: keep the correct orientation in mind during installation, as the pearls are not designed to be a compass.

Art Deco Pearls: a decorative metal screen with fine lines

The design is organised around thin vertical bars. Small solid round pearls punctuate these uprights; between them, tapered triangles and diamonds fit together on three staggered levels. These shapes create repeated pendants in a precise layout where the solid parts remain discreet compared to the narrow openings. The frame surrounds the entire piece and forms the border of the panel.

The pattern is mirrored from left to right, but not from top to bottom: it has a top and a bottom that must be respected during installation. The many narrow passages filter both sight and light. This art deco screen thus brings a graphic rhythm to a room divider without turning the space into a solid wall.

This panel joins our selection of garden screen panels to create a decorative screen in the garden or to dress up a fence.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material gives character to your art deco pearl privacy screen and determines where you can install it. For a metal privacy screen with a large surface area, a slightly thicker gauge provides better stability, where available for the chosen material.

Material Available thicknesses Installation
Brushed stainless steel 1 to 4 mm Indoor or outdoor
Raw steel 2 to 20 mm Preferably indoor
Galvanised steel 1 to 3 mm Indoor, or outdoor (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoor or outdoor
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion well. Raw steel retains the natural grey-black hue of the metal, perfect for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, does not rust, and is easy to handle.

A custom privacy screen tailored to your space

A pergola opening, a section of fencing, or a divider between two rooms: every location has its own proportions. You specify the desired size in the configurator and the design proportions are preserved. The pearls, triangles, and diamonds thus keep their rhythm without being stretched according to your project.

Before ordering your art deco pearl privacy screen, measure the space to be dressed and consider the distance from which you will view the panel. If you install several side by side, keep the size identical for a regular repetition. The configurator rejects sizes that are too small for the chosen thickness to preserve the feasibility of the fine lines.

Your custom privacy screen thus adapts perfectly to the intended spot. Have you designed another pattern? You can also upload your own DXF to have it laser-cut.

Indoor or outdoor: where to install your screen

Outdoors, this metal privacy screen can protect a dining area from prying eyes, add rhythm to a fence, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor privacy screen placed in front of a hedge allows the greenery to peek through its openings, while the pendants draw their own pattern.

Indoors, the panel lightly separates an entrance from the living room or structures an office nook without cutting off the light. Raw steel is well-suited for these uses with its grey-black finish. In all cases, remember to orient the design with the top and bottom in the correct direction.

Corten steel is reserved for outdoors only. Its patina forms over time and can run with the rain; indoors, it would stain walls and floors. In the garden, its warm tones pair beautifully with brick and ivy.

Fixing and maintenance

The design does not include fixing holes: installation is planned via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you require holes integrated into the cut, please send your own file.

Maintenance is simple: a slightly damp microfibre cloth is sufficient. For stainless steel, a suitable cleaner, applied in the direction of the brushing, restores the shine. Corten patinates outdoors without requiring any specific maintenance.

For your art deco pearl privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». Its pendants are just waiting for their place in the sun.

FAQ about the art deco pearl privacy screen

Can the art deco pearl privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain; galvanised steel does too thanks to its zinc layer. Corten is reserved for outdoors and patinates naturally. Raw steel is primarily intended for indoors, as it oxidises in humid air. This panel can therefore dress a fence, a garden wall, or a terrace.

Can corten steel be used indoors?

No. Corten forms a patina that can continue to evolve and run with humidity. Indoors, it would risk staining walls and floors. This material is for outdoors only. For a separation inside the home, you can choose brushed stainless steel, anodised aluminium, or raw steel, depending on the desired look and your usage.

What size should I choose for a privacy screen panel?

The size is selected in the configurator and the design proportions are maintained. Measure the space to be dressed, identify what you wish to hide, and consider the viewing distance. If you align several copies, a common size helps maintain a regular rhythm. A cardboard template can help you visualise the footprint before choosing.

How do I fix a metal privacy screen?

The design does not contain fixing holes. The panel is mounted by its frame onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets must be provided. Also, check the top and bottom orientation before fixing.

Brushed stainless or corten: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin appearance and is suitable both inside and out. Corten (1.5 mm) develops a warm patina but must remain outdoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Raw steel (2 to 20 mm) provides a grey-black finish, better suited for indoors.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended in the table. Anodised aluminium does not rust and is also suitable outdoors. These two choices allow you to install the screen in the garden or on a terrace, considering the planned support and fixing.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally enough to remove dust. For brushed stainless steel, use a stainless steel cleaner in the direction of the brushing. Avoid abrasive sponges and chlorinated products, which could mark the surface. Corten patinates outdoors without special maintenance; simply plan its location considering possible runoff.

Can I have my own design laser-cut?

Yes. You can send your DXF file via john-steel.com to have it laser-cut in the material and thickness of your choice. This is useful if your project requires a different composition or integrated fixing holes. The cutting service allows you to create a panel matched to your space, based on your own file.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.