Custom metal privacy screen - Art Deco Prism
  • Custom metal privacy screen - Art Deco Prism
  • Custom metal privacy screen - Art Deco Prism
  • Custom metal privacy screen - Art Deco Prism
  • Custom metal privacy screen - Art Deco Prism

Custom metal privacy screen - Art Deco Prism

Art deco prism privacy screen: a dense and architectural design

The art deco prism privacy screen creates a graphic barrier without completely closing off your space. Its large central diamond, formed by nested frames and crossed diagonals, immediately draws the eye. A band of parallel bars crosses the panel at mid-height, while chevrons rhythm the top and bottom sections. It filters views on a terrace or within a room while allowing light to flow through freely.

Laser cut to your specifications and made in France, this panel is crafted from a single piece of sheet metal including its frame. You can select the material, thickness, and size using our configurator. Its design is symmetrical from left to right, making it a perfect fit for contemporary or Art Deco-inspired projects. Just a heads-up: the small dots in the pattern are not control buttons.

Art Deco Prism: a geometric decorative metal screen

At the centre of the panel, a large diamond is formed by nested frames and diagonally crossed bars. Small round dots punctuate the intersections, highlighting the construction of the motif. At mid-height, a horizontal band of parallel bars spans the entire composition, acting as a clean dividing line.

At the top and bottom, thick vertical bars are intersected by chevron diagonals. These bold lines and the dense pattern give the art deco prism privacy screen a strong architectural character. While the top and bottom are very similar, they are not identical; however, the panel is perfectly symmetrical from left to right. The cut-outs let light pass through, creating structured shadows throughout the day.

This panel joins our selection of metal garden panels. It can be used to add rhythm to a fence, protect a terrace corner from prying eyes, or bring a graphic accent to an indoor partition.

Brushed stainless, raw steel, galva, alu or corten: choose your material

The material defines the character of your art deco prism privacy screen and determines where it can be installed. For a large metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look with excellent corrosion resistance. Raw steel retains its natural grey-black hue for an industrial feel. Galvanised steel, protected by a zinc layer, displays a discreet matte grey. Anodised aluminium is lightweight and rust-proof.

A custom privacy screen tailored to your space

Whether you are dressing a pergola opening, a section of fencing, or separating two zones in a room, you can choose the size in the configurator. The proportions of the motif are preserved: the large diamond, its transversal band, and the chevrons maintain their balance. The configurator prevents sizes that are too small for the selected thickness.

Before configuring your art deco prism privacy screen, measure the area to be covered and consider the distance from which the panel will be viewed. If you are aligning several panels, using identical sizes ensures the continuity of the design. A cardboard template can also help you visualise the footprint without needing a degree in descriptive geometry.

Your custom privacy screen thus adapts to the proportions of your project. Have you imagined a different pattern or do you need specific openings? You can upload your own DXF for a cut tailored to your drawing.

Outdoor privacy screen or indoor: where to install it

Outdoors, this metal screen can protect a dining area, add rhythm to a fence, or dress up a space near a hedge. Brushed stainless steel, anodised aluminium, and galvanised steel are suitable for the outdoors depending on the thickness. An outdoor privacy screen with its crossed lines looks stunning against foliage or a plain wall.

Indoors, the panel can separate an entrance from a living room, structure an office nook, or decorate a wall while letting light through. Raw steel is well-suited for these uses with its natural grey-black appearance; stainless steel and aluminium provide a brighter presence.

Corten steel is for outdoor use only. Its patina forms over time and can run off with rain; it would risk staining indoor walls and floors. Outdoors, its warm tones blend perfectly with garden plants and materials.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, a wall, or a pergola, using screws adapted to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be sourced separately.

For routine maintenance, a slightly damp microfibre cloth is sufficient. For brushed stainless steel, use a suitable product and wipe in the direction of the brushing. Corten patinates naturally outdoors; other materials appreciate gentle cleaning without abrasive sponges.

For your art deco prism privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The central diamond is ready to take its place in your decor.

FAQ about the art deco prism privacy screen

Can the art deco prism privacy screen be used outdoors?

Yes, by choosing a suitable material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel from the recommended thickness upwards. Corten is specifically designed for the outdoors and patinates there. Raw steel is best reserved for indoors, as moisture can encourage oxidation. This panel can thus structure a terrace or a fence.

Can corten be installed indoors?

No. The protective patina of corten is a layer of rust that continues to evolve and can run off with humidity. Indoors, it would risk staining walls, floors, or textiles. This material is therefore reserved for the outdoors, where it complements plants well. For an indoor partition, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for this screen panel?

You choose the size in the configurator, which maintains the proportions of the design. Measure the space to be covered, identify the views to be filtered, and consider the viewing distance. To align several pieces, keep dimensions identical so that the large diamonds and horizontal bands align regularly. A cardboard template helps you visualise the result.

How do I fix a metal privacy screen?

The motif does not have fixing holes. Installation is generally done via the frame, onto posts, a chassis, a wall, or a pergola, using screws adapted to the support and the weight of the panel. The piece is supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin look and is suitable both inside and out. Raw steel (2 to 20 mm) provides a grey-black tone, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina, reserved for outdoors. Choose based on the location and desired look.

Galva or anodised aluminium for outdoor use?

Both can work outdoors. Galvanised steel benefits from zinc protection and should be chosen in 1.5 mm minimum for outdoor use. Anodised aluminium is lightweight and rust-proof, offered in 1.5 to 2 mm. The look also differs: galva is matte grey, while aluminium offers an anodised surface. Consider the support and the panel size.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is enough for routine cleaning. On brushed stainless steel, use a suitable cleaner in the direction of the brushing to preserve its satin appearance. Avoid abrasive sponges and chlorinated products. Corten evolves naturally outdoors and requires no specific maintenance treatment. Gentle cleaning keeps other surfaces clean.

Can I have my own design cut?

Yes. You can upload your own DXF file to john-steel.com to have a design cut in the material and thickness of your choice. This is a practical solution if your project requires a different shape or openings designed for your specific installation. Ensure the file correctly represents the contours to be cut before submitting.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.