Custom metal privacy screen - Art Deco Arcades
  • Custom metal privacy screen - Art Deco Arcades
  • Custom metal privacy screen - Art Deco Arcades
  • Custom metal privacy screen - Art Deco Arcades
  • Custom metal privacy screen - Art Deco Arcades

Custom metal privacy screen - Art Deco Arcades

Art deco arcade privacy screen: light arches in fine lines

An art deco arcade privacy screen separates your space without weighing it down. Its concentric semi-circle arcs stack row upon row, resembling classical arcades or seashells. Interlaced rings and triangular points complete this graphic and airy design. It filters prying eyes on a terrace, adds rhythm to a fence, or defines an indoor area while letting the light flow through.

Laser-cut to your specifications and made in France, the panel is crafted as a single piece of sheet metal including its frame. You can choose the material, thickness, and size within the configurator. The pattern is symmetrical from left to right, but it has a distinct top and bottom: keep the correct orientation in mind during installation. Don't worry, the seashells won't swim away.

Art Deco Arcades: stacked semi-circles in a decorative metal screen

The design is built in rows. Concentric semi-circle arcs nest within one another, creating the look of arcades or shells. At the base of the arcs, pairs of interlaced rings punctuate the pattern, while triangular points between the rows provide a sharp counterpoint to the curves. The lines are fine and numerous, giving the panel a strong graphic presence without feeling heavy.

The art deco arcade privacy screen is symmetrical from left to right, but not from top to bottom. Therefore, it has a specific top and bottom that must be respected during installation. The cut-outs allow air to circulate and light to pass: it softens the view rather than completely closing off the space. Depending on the sunlight, the curves and points cast shifting shadows around the panel.

This panel joins our selection of garden screen panels, perfect for dressing up an exterior or structuring a space with an openwork design.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material gives your art deco arcade privacy screen its character and determines the suitable locations. The fine curves stand out differently depending on the metal's finish. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesWhere to install
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look while resisting corrosion. Raw steel retains its natural grey-black hue, and galvanised steel keeps its matte grey finish protected by zinc. Lightweight anodised aluminium does not rust.

A custom privacy screen tailored to your space

You select the size in the configurator based on the opening you wish to dress: a fence section, a separation under a pergola, or a boundary between two rooms. The proportions of the design are maintained so that the semi-circles, rings, and points keep their balance. The configurator prevents sizes that are too small for the chosen thickness to preserve the precision of the fine details.

Before ordering your custom privacy screen, measure the available space and visualise the panel from the main vantage point. Also, consider its orientation: the top and bottom must remain in the correct direction. To align several panels, choose identical sizes so that the rows of the pattern correspond regularly.

Your art deco arcade privacy screen thus adapts to your project. Would you like a different design or personalised cut-outs? You can upload your own DXF to have it laser-cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal screen can add rhythm to a fence, preserve the privacy of a dining area, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain, provided the minimum thickness for galvanised steel is respected. An outdoor privacy screen with repeated arcs brings a regular pattern to the decor.

Indoors, the openwork panel separates two areas, structures an entrance, or creates a decorative screen without blocking light. Raw steel is well-suited for these uses with its grey-black appearance. The pattern has a specific installation direction: plan its orientation before fixing it so that the arcs and points are upright.

Corten steel is for outdoors only. Its rust patina forms over time and can run off with rain; indoors, it would risk staining walls and floors. Outside, its warm tones blend naturally with brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, a wall, or a pergola, using screws suited to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. To include holes, you can provide a suitable DXF file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On brushed stainless steel, use a suitable product in the direction of the brushing. Avoid abrasive sponges and chlorine-based products, which could mark the surface. Corten patinates on its own outdoors: it does not require a complicated maintenance schedule.

For your art deco arcade privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». It's time to give your walls the right rhythm!

FAQ about the art deco arcade privacy screen

Can the art deco arcade privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel from the recommended outdoor thickness. Corten steel is designed for the outdoors and patinates there. Raw steel is intended for indoors as it oxidises in humid air. Also, check the pattern direction during installation: it has a top and a bottom.

Can corten steel be used indoors?

No. Corten develops a rust patina that continues to evolve and can drip with humidity. Indoors, it would risk staining walls and floors. This material is therefore for outdoors only, such as in the garden or on a facade. For a separation inside the home, choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen panel?

The size is chosen in the configurator, which maintains the design proportions. Measure the space to be dressed and think about the view you want to filter. A cardboard template or masking tape helps visualise the footprint before ordering. If aligning several panels, keep a consistent size and check the orientation, as the pattern has a top and bottom.

How do I fix a metal privacy screen?

The panel does not have fixing holes. It is generally installed by its frame onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the piece. Accessories are not provided: screws, plugs, and posts must be sourced separately. Remember to orient the top and bottom of the design before fixing the frame.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and is suitable both inside and out. Raw steel (2 to 20 mm) keeps a grey-black hue and is installed preferably indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) patinates outside; it is for outdoors only.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, choose a thickness of at least 1.5 mm. Anodised aluminium does not rust and is also suitable for an outdoor screen. Both offer an alternative to stainless steel, depending on the desired look and weight. The configurator shows available thicknesses for the selected material.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is enough for routine cleaning. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Avoid abrasive sponges and chlorine products. Corten patinates by itself outdoors. Gentle cleaning helps keep the curves and fine cut-outs sharp without damaging the surface.

Can I have my own design laser-cut?

Yes. You can send your DXF file via john-steel.com to have it laser-cut in the desired material and thickness. This is useful for creating a pattern that matches your layout or for planning fixing holes. Ensure the design respects the cutting constraints before sending; the configurator and dedicated service will guide you through this step.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.