Custom metal privacy screen - Art Deco Shells
  • Custom metal privacy screen - Art Deco Shells
  • Custom metal privacy screen - Art Deco Shells
  • Custom metal privacy screen - Art Deco Shells
  • Custom metal privacy screen - Art Deco Shells

Custom metal privacy screen - Art Deco Shells

Art deco shell privacy screen: cascading fans

An art deco shell privacy screen brings a generous rhythm to your space divider. Large fans striated with rays stack like scallop shells, with each row half-covering the previous one. At the heart of each shell, an ogive point completes the design. This perforated panel filters views while allowing light to flow through freely.

Laser cut to your specifications and made in France, it is crafted as a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. Please note that the design has a distinct top and bottom; keep this in mind during installation, as the shells prefer to stay correctly oriented.

Art Deco Shells: a rounded decorative metal screen

The pattern consists of rows of large fans striated with numerous rays. Each row half-overlaps the one before it, resembling superimposed scallop shells. In the centre of each, an ogive point marks the focal point. The lines are numerous and regular; their repetition gives the panel a sweeping, rounded appearance.

The art deco shell privacy screen is symmetrical from left to right, but not from top to bottom. Therefore, it has a specific top and bottom that must be respected during installation. This orientation maintains the rhythm of the rows as originally designed. The gaps between the rays allow air and light to pass, while the solid parts create an effective decorative screen.

This custom privacy screen joins our selection of garden panels. Its curves and ogive points provide a strong graphic presence for a fence or an outdoor separation.

Brushed stainless, raw steel, galva, alu or corten: choose your material

The material defines the character of your art deco shell privacy screen and helps determine its best location. For a large-scale metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesWhere to install
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look and resists corrosion well. Raw steel retains its natural grey-black hue, while galvanised steel, protected by zinc, displays a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

Whether it is for a terrace divider, a pergola opening, or a section of fencing, every location has its own proportions. You specify the desired size in the configurator, and the pattern proportions are preserved. The shells thus keep their sweeping design and regular rows without any stretching of the motif.

Before ordering your art deco shell privacy screen, identify the area to be dressed and the vantage point from which it will be viewed. If you plan to install several panels side by side, using identical sizes helps extend the rhythm of the rows. The configurator will block dimensions that are too small for the selected thickness to ensure the design remains feasible.

Your custom screen thus adapts perfectly to your project. Have you imagined a different pattern or wish to integrate specific details for your layout? You can upload your own DXF to have it laser cut.

Indoor or outdoor privacy screen: where to install

Outdoors, this metal screen can dress up a fence, protect a dining area from prying eyes, or structure a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor screen in stainless steel or aluminium maintains its appearance through the seasons, with its rounded rows acting as a permanent decor.

Indoors, the panel creates a light separation between two areas, defines an entrance, or dresses a living room without completely blocking the light. Raw steel is suitable for these uses with its natural grey-black finish. Remember to orient the pattern with the top facing up: the shells are not symmetrical from top to bottom.

Corten steel is for outdoors only. Its rust patina forms progressively and can run off with the rain; it would stain walls and floors indoors. Outside, its warm tones blend beautifully with brick, vegetation, and garden landscaping.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto a suitable support such as posts, a chassis, a wall, or a pergola, using screws chosen according to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On brushed stainless steel, use a suitable product in the direction of the brushing to revive the satin look. Corten patinates naturally outdoors and requires no special care. Just a bit of dusting and it's happy.

For your art deco shell privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The rows of shells are waiting for their new home.

FAQ about the art deco shell privacy screen

Can the art deco shell privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the outdoors, where it develops its characteristic patina. Raw steel is intended for indoor use, as moisture can cause it to oxidise. You can thus install the panel on a terrace or a fence.

Can corten steel be used indoors?

No. Corten develops a layer of rust that continues to form and can run off with humidity. Indoors, this would risk staining walls, floors, or textiles. This material is therefore for outdoors only, such as in a garden or on a facade. For an indoor room, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is adjusted in the configurator while the proportions of the shells are preserved. Measure the space to be dressed, identify the views to be filtered, and consider the distance from which you will see the panel. To check the effect before ordering, mark the outline with masking tape or a cardboard template. The configurator indicates feasible sizes based on thickness.

How do I fix this metal privacy screen?

The design does not feature fixing holes. The panel is mounted by its frame onto a suitable support, such as posts, a chassis, or a wall, using screws chosen based on the support and weight. The piece is supplied without accessories: screws, plugs, and posts are not included. Also, remember to respect the top and bottom of the motif.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and is suitable both inside and out. Raw steel (2 to 20 mm) keeps a natural grey-black hue, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) patinates in warm tones but remains for outdoors only.

Are galva or alu suitable for outdoor use?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium is lightweight, does not rust, and is also suitable for outdoor installation. Both materials allow you to enjoy the perforated design in a garden or on a terrace, provided the fixing is adapted to the support.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is suitable for routine cleaning. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Avoid abrasive sponges and chlorine products, which can mark the surface. Corten patinates naturally outdoors and requires no particular maintenance. Gentle cleaning is enough to keep the openings clear.

Can I have my own design laser cut?

Yes. You can submit your own DXF file on john-steel.com for laser cutting in the material and thickness suited to your project. This is a great solution for creating a matching panel or planning specific openings, such as fixing holes. Bending services are also available for both individuals and professionals directly on the website.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.