Custom metal privacy screen - Geometric Facets
  • Custom metal privacy screen - Geometric Facets
  • Custom metal privacy screen - Geometric Facets
  • Custom metal privacy screen - Geometric Facets
  • Custom metal privacy screen - Geometric Facets

Custom metal privacy screen - Geometric Facets

Geometric facet privacy screen: a panel with angular lines

The geometric facet privacy screen transforms a simple partition into a striking graphic composition. Straight lines intersect in every direction, carving the surface into irregular triangles and polygons, reminiscent of a cut gemstone or a piece of origami. With no repeating elements, this design adds character to a terrace, filters unwanted views, or defines an indoor space while letting light flow through.

Laser-cut to your specifications and made in France, this panel is crafted from a single piece of sheet metal including its frame. You can choose the material, thickness, and size within the configurator. Please note that the pattern has a distinct top and bottom: keep the correct orientation in mind during installation, as the origami won't fold itself into place.

A decorative metal screen with an openwork facet design

The design consists of fine, consistent lines crossing at various angles. They divide the surface into triangles and irregular polygons of varying sizes. The overall effect evokes a cut stone or an unfolded origami, with no repeating pattern. A solid frame surrounds this composition, meaning the geometric facet privacy screen is produced as a single, sturdy piece.

The large angular openings allow air and light to circulate freely. The screen filters sightlines while maintaining a feeling of openness: it can punctuate a fence, dress up a wall, or separate two zones without completely cutting them off. Since the design has a specific top and bottom, be careful to respect its orientation during installation.

This panel joins our selection of garden screen panels to bring a geometric touch to your outdoor landscaping.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material determines the final tone of your geometric facet privacy screen lines. A light finish highlights the cut-outs, while raw steel offers a bolder contrast. For a large-scale metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable ThicknessesInstallation Area
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look and excellent corrosion resistance. Raw steel retains its natural grey-black hue, while galvanised steel receives a zinc protection for a matte grey finish. Lightweight anodised aluminium does not rust.

A custom privacy screen tailored to your space

You define the desired size in the configurator based on the area you wish to dress: a pergola opening, a section of a fence, or a room divider. The proportions of the motif are preserved so that the lines and large openings maintain their visual balance. The configurator also accounts for the chosen thickness and will prevent sizes that are too small for that specific gauge.

Before ordering your geometric screen, measure the available space and observe the panel from its primary viewing angle. A cardboard template is a simple way to visualise its presence. For several panels placed side by side, plan for consistent sizes and double-check their orientation: each one has a top and bottom to respect.

Your custom privacy screen thus adapts perfectly to your project. Have you designed your own pattern? You can upload your own DXF to have it laser-cut.

Indoor or outdoor use: where to install it

Outdoors, this metal privacy screen can dress up a fence, preserve the privacy of a dining area, or add relief to a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel are all suitable for the exterior. Their angular lines create an openwork screen that lets air and light pass through.

Indoors, the panel can separate an entrance from a living room or structure a space without closing it off. Raw steel brings its grey-black industrial look, while stainless steel and aluminium offer brighter finishes. The geometric motif remains clear in these decorative uses, whether mounted on a wall or as a light partition.

Corten steel is reserved for outdoors only. Its patina forms over time and can run off with rain; indoors, it would risk staining walls and floors. Outside, its warm tones pair beautifully with brick walls or lush vegetation.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, a wall, or a pergola, using screws adapted to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be sourced separately.

For routine maintenance, use a slightly damp microfibre cloth. On brushed stainless steel, a suitable cleaner applied in the direction of the brushing helps preserve the satin appearance. Corten patinas naturally outdoors. Avoid abrasive sponges and chlorine-based products, which can mark the surfaces.

For your geometric facet privacy screen, choose the material, thickness, and size, then click "Configure & buy". Its angles have already said it all.

FAQ about the geometric facet privacy screen

Can the geometric facet privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel, anodised aluminium, and galvanised steel are suitable for outdoor use. Corten is also reserved for outdoors, where its protective patina can form. Raw steel is primarily intended for indoors, as it can oxidise in humid air. The panel is perfect for fences, terraces, or garden walls.

Can corten steel be used indoors?

No. The rust patina of corten continues to evolve and can run off with moisture. Indoors, this would likely stain your walls and floors. Therefore, this material is reserved for outdoors, such as a garden or a facade. For an indoor partition, we recommend brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen?

The size is defined in the configurator, which maintains the motif's proportions. Measure the area to be dressed and consider the distance from which you will view the panel. A cardboard template can help you visualise the result. If installing multiple panels, keep sizes consistent and respect the top and bottom of each.

How do I fix a metal privacy screen?

The design does not provide any fixing holes. The panel is installed by its frame onto posts, a chassis, a wall, or a pergola, using screws suited to the support and weight. It is supplied without accessories: screws, plugs, posts, and brackets are not included. Remember to check the orientation, as the motif has a top and bottom.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and works both inside and out. Raw steel (2 to 20 mm), with its grey-black tone, is mainly for indoor use. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina and remains reserved for the exterior.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also ideal for a fence or terrace. Both materials allow you to enjoy the motif outdoors with different finishes: matte grey for galva, and an anodised look for aluminium.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually enough to remove dust. For brushed stainless steel, use a suitable cleaner if needed and wipe in the direction of the brushing. Corten patinas naturally outdoors. Avoid abrasive sponges and chlorine products to prevent marking the material.

Can I have my own design laser-cut?

Yes. You can upload your DXF file to john-steel.com, then choose the desired material and thickness for the laser cutting. This is useful for creating a unique motif or integrating fixing holes into your design. Ensure the file matches your project before uploading; the cutting configurator helps prepare your request.

  • Style / Theme: Geometric
Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.