Custom metal privacy screen - Art Deco Ovals
  • Custom metal privacy screen - Art Deco Ovals
  • Custom metal privacy screen - Art Deco Ovals
  • Custom metal privacy screen - Art Deco Ovals
  • Custom metal privacy screen - Art Deco Ovals

Custom metal privacy screen - Art Deco Ovals

Art deco oval privacy screen: a refined geometric design

The art deco oval privacy screen creates a graphic backdrop without closing off your space. Its rich design combines ovals, a radiated circle, vertical rods, hourglass triangles, diamonds, and chevrons. It is perfect for dressing up a terrace, filtering views in the garden, or separating two indoor areas while letting light flow through.

Laser-cut to your specifications and made in France, it is crafted as a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. Its fine lines are designed to catch the eye, though they don't actually demand their own red carpet.

Art Deco Ovals: a decorative metal screen with openwork

At the centre, two overlapping ovals and a circle crossed by rays form the heart of the pattern, framed by vertical rods. Surrounding them, hourglass triangles, diamonds, and chevrons build a dense and regular composition. Two small round dots punctuate the top of the frame. The thin lines give the panel a rich design without feeling cluttered.

The pattern is symmetrical from left to right. The openwork creates a decorative screen that filters sightlines while allowing light to pass. This unique piece includes its own frame; the design does not feature any pre-drilled fixing holes. In the sun, its geometric shapes cast a shadow that evolves with the hour, without moving a single millimetre.

This art deco screen joins our selection of garden panels to add rhythm to a fence or an outdoor corner.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material gives your art deco oval privacy screen its character and determines the best location for it. For a large surface panel, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look with excellent corrosion resistance. Raw steel retains its natural grey-black hue, while galvanised steel features a matte grey finish thanks to its zinc layer. Lightweight anodised aluminium does not rust.

A custom privacy screen adapted to your space

Whether it is for a pergola opening, a fence, or a room divider: every location has its own proportions. You specify the desired size in the configurator, and the pattern proportions are maintained so that the ovals and geometric details keep their balance.

Before ordering your art deco oval privacy screen, measure the area to be dressed and consider the distance from which it will be viewed. A single panel creates a decorative screen; several identical pieces aligned can extend the pattern. The configurator will block sizes that are too small for the selected thickness to ensure the laser cutting remains feasible.

Your custom screen thus fits your project perfectly. Have you imagined a different design or do you need specific fixings? You can also upload your own DXF to have it cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal privacy screen can dress up a fence, preserve the privacy of a terrace, or structure a corner of the garden. Brushed stainless steel, anodised aluminium, and galvanised steel are all suitable for the exterior. Their finishes highlight the ovals, rays, and lines of the pattern against a green or mineral backdrop.

Indoors, the panel forms a light separation between an entrance and a living room, or adds a decorative detail to a room. Raw steel is well-suited for this use with its natural grey-black appearance. The openwork preserves the flow of light: the separation remains present without becoming another solid wall.

Corten steel is for outdoors only, as its rust patina forms over time and can run during rain. This could stain indoor walls and floors. Outside, its warm tones blend beautifully with brick and ivy, like a frame that has naturally aged in the garden.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using appropriate screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If you wish to integrate holes, you can submit a personalised DXF file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. For brushed stainless steel, use a suitable cleaner in the direction of the brushing to revive the satin look. Corten patinates naturally outdoors and requires no special care.

For your art deco oval privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The ovals are ready to take their place.

FAQ about the art deco oval privacy screen

Can the art deco oval privacy screen be used outdoors?

Yes, provided you choose a suitable material. Brushed stainless steel, anodised aluminium, and galvanised steel are perfect for outside; corten is also reserved for the exterior where it develops its patina. Raw steel is intended for indoor use, as it can oxidise with humidity. This pattern can thus dress a fence or protect a terrace.

Can corten steel be used indoors?

No. Corten develops a rust patina that continues to evolve and can run when damp. Indoors, this would risk staining your walls and floors. This material is therefore for outdoors only, where it fits perfectly in a garden, on a facade, or near a terrace. For a room, prefer stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is selected in the configurator, and the pattern proportions are preserved. Measure the area to cover, identify the views you wish to filter, and consider the viewing distance. To visualise the result, you can mark the outline with masking tape or make a cardboard template. If aligning several panels, identical sizes help maintain a regular rhythm.

How do I fix this metal screen?

The design does not feature fixing holes. The panel is mounted by its frame onto a suitable support, such as posts, a chassis, or a wall, using screws chosen based on the support and the weight of the piece. It is supplied without accessories: screws, plugs, and posts are not included. Plan your fixing method before installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel, available from 1 to 4 mm, has a satin look and suits both indoor and outdoor settings. Raw steel, from 2 to 20 mm, maintains a grey-black finish and is best installed indoors. Anodised aluminium is lightweight and rust-proof; corten develops a warm patina but remains for outdoors only. The choice depends on your decor and location.

Are galva or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by its zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium is also suitable for outdoors, does not rust, and remains lightweight. Both materials can accompany the pattern on a fence or terrace. Choose the thickness offered in the configurator based on your project.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally enough to remove dust. For brushed stainless steel, use a suitable product if needed and wipe in the direction of the brushing. Avoid abrasive sponges and chlorinated products, which can mark the surfaces. Outdoors, corten evolves naturally with its patina and requires no special cleaning.

Can I have my own design cut?

Yes, you can [upload your own DXF](https://www.john-steel.com/en/uploader) for laser cutting in the material and thickness of your choice. This is useful if your project requires a different pattern or integrated fixing holes. Ensure the file accurately represents the expected contours before submitting it.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.