Custom metal privacy screen - Art Deco Star
  • Custom metal privacy screen - Art Deco Star
  • Custom metal privacy screen - Art Deco Star
  • Custom metal privacy screen - Art Deco Star
  • Custom metal privacy screen - Art Deco Star

Custom metal privacy screen - Art Deco Star

Art deco star privacy screen: geometry at the heart of the design

An art deco star privacy screen separates your space without enclosing it. Its highly geometric pattern features a six-pointed star at the centre, surrounded by interlocking triangles and hexagons. Around this core, bands of upward and downward pointing triangles repeat, accented by small hexagons at the top and bottom. It is the perfect choice to dress up a terrace, filter a view, or define an indoor area while letting light flow through.

Laser-cut to your specifications and made in France, the panel is crafted as a single piece of sheet metal including its frame. You can select the material, thickness, and size using our configurator. Its fine, regular lines create a star that never loses its way, even in the middle of a garden fence.

Art Deco Star: a geometric decorative metal screen

At the centre of the art deco star privacy screen, a six-pointed star opens amidst interlocking triangles and hexagons. All around, bands of triangles pointing up and down repeat in a rhythmic pattern. Small hexagons punctuate the upper and lower sections. The fine, consistent lines give the design a sharp geometry, neatly enclosed by a solid border.

The pattern is symmetrical from top to bottom and left to right. This balanced composition provides a strong graphic reference without overwhelming your space. The cut-outs allow air and light to circulate while filtering prying eyes: an elegant way to mark a boundary without turning your garden into a waiting room.

This panel joins our selection of garden screen panels, designed to decorate and structure your outdoor areas.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material gives your art deco star privacy screen its character and determines where it can be installed. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains the natural grey-black hue of the metal, perfect for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, rust-proof, and easy to handle.

A custom privacy screen tailored to your space

Whether it is a pergola opening, a section of fencing, or a room divider: every location has its own proportions. You enter the desired size in the configurator, and the pattern proportions are maintained so that the central star and its triangle bands remain harmonious.

Before ordering your custom privacy screen, measure the area to be dressed and consider the viewing distance: a panel seen from afar can feel different. To align several panels, choose the same size to maintain a regular composition. The configurator will block sizes that are too small for the chosen thickness, ensuring the fine lines do not become too fragile.

Your panel adapts to your project, not the other way around. Imagined a different pattern? You can also upload your own DXF to have it laser-cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal privacy screen protects a dining area from view, adds rhythm to a fence, or dresses up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor screen installed in front of a hedge or a brick wall makes its geometric shapes pop.

Indoors, the panel creates a light separation between two areas, structures an entrance, or decorates a living room without blocking the light. Raw steel fits perfectly here with its grey-black appearance, while lighter materials highlight the fine lines of the design.

Corten steel is for outdoors only. Its rust patina forms over time and can run off with the rain; indoors, it would stain walls and floors. In the garden, its warm tones pair beautifully with brick and greenery.

Fixing and maintenance

The design does not include fixing holes: installation should be planned according to your support (posts, frame, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. The piece is fixed by its frame, which already creates a clean border around the cut-outs.

Maintenance is simple: a slightly damp microfibre cloth is usually enough. For stainless steel, a stainless steel cleaner applied in the direction of the brushing will revive the shine. Corten patinates on its own, asking for nothing in return.

For your art deco star privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». A well-placed star changes the whole decor.

FAQ about the art deco star privacy screen

Can the art deco star privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the outdoors and patinates naturally. Raw steel is intended for indoor use, as it oxidises in humid air. The panel can thus dress up a terrace, a fence, or a garden wall.

Can corten steel be used indoors?

No. Corten protects itself with a layer of rust that continues to form and can run off with moisture. Indoors, it would risk staining walls, floors, and textiles. This material is for outdoors only, for example in the garden, on a facade, or a terrace. For the home, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen panel?

The size is selected in the configurator, and the pattern proportions are maintained. Measure the available space, identify the views to be filtered, and consider the distance from which you will view the panel. If you align several, keep the same size for a regular rhythm. A cardboard template can help you visualise the central star before confirming.

How do I fix a metal privacy screen?

The design does not feature fixing holes. The panel is mounted by its frame onto posts, a chassis, or a wall, using screws suitable for the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets must be provided by you.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel, available from 1 to 4 mm, offers a luminous look and suits both indoors and outdoors. Raw steel, from 2 to 20 mm, defines the lines with a grey-black finish and is best installed indoors. Anodised aluminium is lightweight and rust-proof. Corten develops a warm patina but remains for outdoors only.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by its zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for outdoor installation. Both materials can dress up a fence or a terrace. The choice then depends on the desired look and available thicknesses.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually sufficient. For brushed stainless steel, use a suitable cleaner in the direction of the brushing to revive its satin appearance. Corten requires no special care: it patinates naturally outdoors. Avoid abrasive sponges and chlorinated products, which can mark the metal surfaces.

Can I have my own design laser-cut?

Yes. You can send your DXF file to john-steel.com for laser cutting in the material and thickness of your choice. This is useful for creating a matching pattern or integrating fixing holes tailored to your project. The file is reviewed before production to ensure the shapes and cut-outs are suitable for the chosen material.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.