Custom metal privacy screen - Art Deco Cascade
  • Custom metal privacy screen - Art Deco Cascade
  • Custom metal privacy screen - Art Deco Cascade
  • Custom metal privacy screen - Art Deco Cascade
  • Custom metal privacy screen - Art Deco Cascade

Custom metal privacy screen - Art Deco Cascade

Art deco cascade privacy screen: slender cascading arcs

The art deco cascade privacy screen creates a light separation with slender, elegant lines. Narrow, elongated arcs overlap in rows, resembling cascading water jets. Each arc is doubled with parallel lines, while long vertical lines connect the rows from top to bottom. This perforated panel is perfect for dressing up a fence, shielding a terrace corner from prying eyes, or dividing two spaces without blocking the light.

It is laser-cut to measure and made in France, crafted from a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. The design is symmetrical from left to right, but it has a specific top and bottom: please ensure the arcs are facing upwards during installation. The cascade, after all, does not flow uphill.

Art Deco Cascade: a perforated arc design

The pattern develops in several rows of narrow, long, and closely spaced arcs. They overlap and curve upwards in a vault, with a double line of parallel tracing that emphasises each curve. Long vertical lines link the top rows to the bottom, further stretching the composition. The lines are fine and regular, all enclosed within a solid frame.

The art deco cascade privacy screen is symmetrical from left to right, but not from top to bottom. Since the vaults of the arcs face upwards, the panel has a specific installation direction. Its perforations allow air and light to pass through while filtering views. Depending on the time of day, the arcs project lines onto the ground that extend the drawing: the sun handles the staging.

This decorative metal screen joins our selection of garden panels, ideal for dressing up a garden or adding rhythm to a fence with a perforated motif.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material gives character to your art deco cascade privacy screen and determines where you can install it. The fine lines stand out differently depending on the metal chosen. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the selected material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains the natural grey-black hue of the metal for an industrial feel. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, does not rust, and is easy to handle.

A custom privacy screen tailored to your space

A pergola opening, a section of fencing, or a partition between two rooms: every location has its own proportions. You enter the desired size in the configurator, and the proportions of the motif are preserved so that the arcs remain slender. The chosen shape thus adapts to your project while maintaining its vertical rhythm.

Before ordering your art deco cascade privacy screen, measure the space to be covered and consider the viewing distance: a panel seen from afar may seem smaller. If you plan to install several panels side by side, keep the same size so that the rows continue regularly. The configurator rejects sizes that are too small for the chosen thickness to preserve the strength of the lines.

Your custom privacy screen fits perfectly into the intended space. Do you have another design in mind? You can also upload your own DXF to have it laser-cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal privacy screen can protect a dining area from view, dress up a fence, or structure a garden space. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. An outdoor screen in stainless steel or aluminium maintains its appearance throughout the seasons, with the arcs creating a graphic shield.

Indoors, the panel creates a light separation between two areas, dresses up an entrance, or structures a living room without stealing the light. Raw steel fits perfectly here with its dark, matte finish. The vertical lines give a slender rhythm to a decorative partition.

Corten steel is reserved for outdoors only. Its rust patina forms over time and can run off with rain; indoors, it would stain walls and floors. In the garden, its warm tones blend beautifully with brick and ivy.

Fixing and maintenance

The panel is cut from a single piece of sheet metal including its frame, and the design does not include fixing holes. Installation is done via the frame, depending on your support (posts, frame, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. For holes integrated into the cut, please send your own file.

Maintenance is simple: a slightly damp microfibre cloth is sufficient. For stainless steel, a suitable cleaner applied in the direction of the brushing restores the shine. Corten patinates outdoors without requiring any specific intervention.

For your art deco cascade privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». The arcs are ready to unfold their cascade.

FAQ about the art deco cascade privacy screen

Can the art deco cascade privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten is designed for outdoors and patinates over time. Raw steel is best reserved for indoors, as it oxidises in humid air. The panel can thus dress up a fence or protect a terrace.

Can corten steel be used indoors?

No. Corten is protected by a layer of rust that continues to form and can run off with moisture. Indoors, it would risk staining walls and floors. This material is reserved for outdoors, where its patina can develop. For an indoor separation, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is selected in the configurator, and the motif proportions are preserved. Measure the space to be covered, identify what you wish to hide, and consider the viewing distance. If aligning several panels, keep the same size for a regular rhythm. A cardboard template helps visualise the result before choosing.

How do I fix a metal privacy screen?

The design does not include fixing holes. The panel is generally fixed by its frame to posts, a chassis, or a wall, using screws suitable for the support and the weight of the piece. The sheet and frame form a single piece. The screen is supplied without accessories: screws, plugs, and posts must be provided by you.

Brushed stainless or corten: which material to choose?

Choose based on the location and desired look. Brushed stainless steel, available from 1 to 4 mm, offers a luminous look and works both indoors and outdoors. Corten, in 1.5 mm, takes on a warm patina but is reserved for outdoors. Anodised aluminium is lightweight and rust-proof; raw steel provides an industrial look, better suited for indoors.

Is galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for a screen exposed to rain. Both materials allow the motif to be installed outdoors. The choice depends on the matte grey look of galva or the lightness of aluminium.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is sufficient in most cases. For brushed stainless steel, use a stainless steel cleaner and wipe in the direction of the brushing. Avoid abrasive sponges and chlorinated products, which can mark the surface. Corten patinates outdoors without special maintenance; however, its patina may run with rain.

Can I have my own design laser-cut?

Yes. You can send your DXF file via john-steel.com: it will be laser-cut in the material and thickness of your choice. This is useful for creating a personal motif or planning fixing holes adapted to your support. The file must describe the design to be cut; folding services are also available for individuals and professionals.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.