Custom metal privacy screen - Art Deco Targets
  • Custom metal privacy screen - Art Deco Targets
  • Custom metal privacy screen - Art Deco Targets
  • Custom metal privacy screen - Art Deco Targets
  • Custom metal privacy screen - Art Deco Targets

Custom metal privacy screen - Art Deco Targets

Art deco target privacy screen: graphic vertical lines

The art deco target privacy screen creates a geometric backdrop that filters sightlines without closing off your space. Solid discs encircled by a ring, resembling small targets, punctuate vertical stems. Between them, chevrons, arrowheads, and elongated diamonds compose a decorative metal screen with a bold character, perfect for dressing up a terrace, a fence, or an indoor partition.

Laser-cut to your specifications and made in France, the panel is a single piece of sheet metal including its solid frame. You can choose the material, thickness, and size via the configurator. Its regular pattern brings order to the lines: even prying eyes will know exactly where to look.

Art Deco Targets: a pattern of discs and vertical lines

The design is organised into regular vertical bands across the entire height. On these stems, solid discs surrounded by a ring follow one another, evoking small targets. Between these circular markers, chevrons and arrowheads link the columns, while long stretched diamonds occupy the centre. The lines are relatively thick, and a solid frame surrounds the artwork.

This alternation of round and angular shapes gives the panel a rhythmic feel. The cut-outs allow light and air to pass through while creating a visual filter useful for preserving a bit of privacy. The frame maintains the overall contour and accompanies the regular bands. To discover other models, visit our garden panels section.

The art deco target privacy screen plays with immediately recognisable shapes without being overloaded: the rings draw the eye, the points guide the gaze between columns, and the diamonds lengthen the centre. It is a pattern that hits the mark without needing an instruction manual.

Choose your material for this custom privacy screen

The material gives character to your art deco target privacy screen and determines where it can be installed. For a large-scale metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion well. Raw steel retains its natural grey-black hue for an industrial feel. Galvanised steel, protected by zinc, takes on a discreet matte grey. Anodised aluminium is lightweight, does not rust, and is easy to handle.

A decorative metal screen tailored to your space

A pergola opening, a section of fencing, or a partition between two rooms: every location has its own proportions. You specify the desired size in the configurator, and the pattern proportions are maintained so that the discs, chevrons, and diamonds keep their visual balance.

Before ordering your custom privacy screen, measure the area to be covered and consider the distance from which you will view the panel. If you install several side by side, choose the same size so that the vertical bands align regularly. The configurator blocks sizes that are too small for the selected thickness to preserve the strength of the lines.

Your panel thus adapts perfectly to your project. Do you have another design in mind or need specific cut-outs? You can upload your own DXF to have it laser-cut.

Indoor or outdoor: where to install your garden screen panel

Outdoors, this metal privacy screen can protect a dining area from prying eyes, hide equipment, or add rhythm to a fence. Brushed stainless steel, anodised aluminium, and galvanised steel are suitable for the exterior. An outdoor privacy screen placed in front of a wall or hedge creates a graphic contrast with its surroundings.

Indoors, the perforated panel can separate an entrance from the living room, structure a workspace, or dress up a wall. Raw steel fits perfectly here with its dark, matte appearance; stainless steel and aluminium provide a brighter finish.

Corten steel is reserved for outdoors only. Its patina forms over time and can run with the rain; indoors, it would risk staining walls and floors. Outside, its warm tones blend beautifully with brick and vegetation.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you require pre-cut holes, please provide your own DXF file.

Routine maintenance is simple: a slightly damp microfibre cloth is sufficient. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Corten patinates on its own outdoors; it requires no special maintenance ritual.

For your art deco target privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». All that's left is to hit the ideal spot.

FAQ about the art deco target privacy screen

Can the art deco target privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten is specifically designed for the exterior and patinates outdoors. Raw steel is preferably reserved for indoors as it oxidises in humid air. This panel can thus dress up a fence, a terrace, or a garden wall.

Can corten steel be installed indoors?

No. The rust patina of corten continues to form and can run with humidity. Indoors, it risks staining walls, floors, and textiles. Corten is therefore reserved for outdoors only. For an indoor partition, choose brushed stainless steel, anodised aluminium, or raw steel, depending on the desired look and use.

What size should I choose for a privacy screen?

The size is selected in the configurator, which maintains the pattern's proportions. Measure the available space and consider the height of the sightlines you wish to filter, as well as the viewing distance. If you align several panels, keep the same size for a regular rhythm. A cardboard template can help you visualise the result.

How do I fix this metal privacy screen?

The design contains no fixing holes. Installation is done via the frame, onto posts, a chassis, or a wall, using screws suited to the support and the weight of the piece. The panel is supplied without accessories: screws, plugs, and posts must be sourced separately. Ensure the support is sturdy before installation.

Which material should I choose for my screen?

Brushed stainless steel (1 to 4 mm) resists corrosion and works both inside and out. Raw steel (2 to 20 mm) provides an industrial look, mainly for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina but is reserved for outdoors only.

Galva or aluminium for an outdoor screen?

Both are suitable for outdoors. Galvanised steel is protected by a zinc layer and has a matte grey finish; a thickness of at least 1.5 mm is recommended for outdoor use. Anodised aluminium is lightweight and does not rust, with available thicknesses from 1.5 to 2 mm. Your choice depends on the desired weight and appearance.

How do I maintain a perforated metal panel?

A slightly damp microfibre cloth is usually enough to remove dust. On brushed stainless steel, use a stainless steel cleaner in the direction of the brushing. Avoid abrasive sponges and chlorine-based products, which can mark the surface. Corten patinates outdoors without any particular maintenance treatment.

Can I have my own design laser-cut?

Yes. You can send your DXF file via john-steel.com to have it laser-cut in the material and thickness of your choice. This is useful for creating a personalised decor or integrating fixing holes into your own design. The configurator assists both individuals and professionals in preparing their project.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.