Custom metal privacy screen - Art Deco Lanterns
  • Custom metal privacy screen - Art Deco Lanterns
  • Custom metal privacy screen - Art Deco Lanterns
  • Custom metal privacy screen - Art Deco Lanterns
  • Custom metal privacy screen - Art Deco Lanterns

Custom metal privacy screen - Art Deco Lanterns

Art deco lantern privacy screen: rays that shine without dazzling

An art deco lantern privacy screen brings a sophisticated geometric touch to your living space. Elongated hexagons, resembling lanterns or fine jewellery, feature delicate rays radiating from a small central diamond. A large lantern anchors the centre, flanked by two smaller ones at the top, while the lower section transitions into tight vertical bars. This design allows light to filter through while elegantly dressing a garden, a terrace, or a room in your home.

Laser cut to your specifications and made in France, the panel is crafted from a single piece of sheet metal including its frame. You can select the material, thickness, and size using our configurator. The pattern is symmetrical from left to right, with lanterns at the top and bars at the bottom: it is best to double-check which way is up during installation to avoid any awkward surprises.

Art Deco Lanterns: a decorative metal screen of rays and bars

The design combines several elongated hexagonal lanterns. The largest occupies the centre, while two smaller shapes mirror each other at the top corners. Inside each, fine rays open up around a small diamond, creating a luminous fan effect. These delicate lines contrast with wider bars that provide structure to the panel.

At the bottom, tight vertical bars descend toward hexagonal points. This composition gives the motif a highly ornamental top and a rhythmic base. It is symmetrical from left to right, but not from top to bottom: lanterns stay up, bars stay down. The frame surrounds the entire piece, and the panel remains a single sheet of metal with no fixing holes within the design.

This art deco screen can filter prying eyes while letting light circulate. It is a perfect addition to our garden panels range, allowing you to create a decorative separation in your garden or on a patio.

Brushed stainless steel, raw steel, galva, aluminium or corten

The material gives your art deco lantern privacy screen its character and determines where it can be installed. The fine rays stand out differently depending on the metal's finish. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains the natural grey-black hue of the metal for a more industrial feel. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and rust-proof.

A custom privacy screen adapted to your space

Whether it is a pergola opening, a fence section, or a room divider, every location has its own proportions. You specify the desired size in the configurator, and the motif's proportions are preserved. The lanterns keep their slender shape and the bars their rhythm, without the design being randomly stretched.

Before ordering your art deco lantern privacy screen, measure the area to be dressed and consider the viewing distance: a panel seen from afar may appear smaller. If you plan to install several panels side by side, keep the same size so the pattern repeats regularly. The configurator blocks sizes that are too small for the chosen thickness to protect the laser cutting of fine details.

Your custom privacy screen adapts to your project, not the other way around. Have you designed your own pattern? You can also upload your own DXF to have it cut.

Indoor or outdoor: where to install your art deco screen

Outdoors, this metal privacy screen can shield a dining area from view, add rhythm to a fence, or structure a garden path. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor privacy screen placed near plants or a greenhouse creates a beautiful play of lines and shadows throughout the day.

Indoors, the panel can separate an entrance from the living room, dress a staircase, or create a light boundary between two areas. Raw steel fits perfectly here with its natural grey-black appearance. The tight bars at the bottom and lanterns above give the design a very clear sense of direction.

Corten steel is for outdoors only. Its rust patina forms over time and can run off with the rain; indoors, it would stain walls and floors. In the garden, its warm tones complement greenery beautifully.

Fixing and maintenance

The design does not include fixing holes. Installation is planned according to your support (posts, frame, wall, or pergola) and the panel's weight; fixing is done via the frame using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you require holes pre-cut during production, you may upload your own file.

For routine maintenance, a slightly damp microfibre cloth is usually enough. For stainless steel, a suitable cleaner applied in the direction of the brushing helps revive the shine. Corten patinates outdoors without any special treatment: it prefers to live its own life in peace.

For your art deco lantern privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The lanterns are ready to brighten up your project.

FAQ about the art deco lantern privacy screen

Can the art deco lantern privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc coating. Corten steel is exclusively for outdoors and patinates naturally. Raw steel should be kept indoors as it oxidises in humid air. This panel can thus dress a fence, a terrace, or a garden path.

Can I use corten steel indoors?

No. Corten is protected by a layer of rust that continues to form and can run with moisture. Indoors, it would risk staining walls and floors. This material is therefore for outdoors only, where its patina can evolve freely. For an indoor separation, please choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is selected in the configurator, and the design proportions are maintained. Measure the area to be dressed, identify what you wish to hide, and consider the distance from which the panel will be viewed. If aligning several, use the same size for a regular rhythm. A cardboard template can help visualise the result before ordering.

How do I fix a metal privacy screen?

The design does not feature fixing holes. The panel is generally mounted by its frame onto posts, a chassis, or a wall, using screws suited to the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets must be provided by the customer.

Brushed stainless steel or corten: which one to choose?

Choose based on location and desired look. Brushed stainless steel (1 to 4 mm) offers a luminous look and suits both indoors and outdoors. Corten (1.5 mm) develops a warm patina but is for outdoors only. Anodised aluminium is lightweight, while raw steel provides a natural contrast and is mainly intended for indoor use.

Galva or anodised aluminium: which is better for outdoors?

Both are suitable for outdoor use. Galvanised steel is protected by zinc; a thickness of at least 1.5 mm is recommended for outdoors. Anodised aluminium does not rust and remains lightweight, which can make installation easier. The choice depends on the desired aesthetic and the thickness available for your specific configuration.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually sufficient. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Avoid abrasive sponges and chlorine-based products, which can mark the surface. Corten, installed outdoors, evolves naturally with its patina and requires no special treatment.

Can I have my own design laser cut?

Yes. You can upload your DXF file to john-steel.com: it will be laser cut in the material and thickness of your choice. This is useful for creating a matching pattern or planning specific fixing holes for your support. Our cutting service allows you to bring a personal design to life alongside our existing models.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.