Custom metal privacy screen - Art Deco Totem
  • Custom metal privacy screen - Art Deco Totem
  • Custom metal privacy screen - Art Deco Totem
  • Custom metal privacy screen - Art Deco Totem
  • Custom metal privacy screen - Art Deco Totem

Custom metal privacy screen - Art Deco Totem

Art deco totem privacy screen: a mirrored geometric motif

The art deco totem privacy screen creates a bold graphic focal point in your living space. At its heart, a central column features three rings strung like beads at the top and bottom, reminiscent of a traditional totem. Flanking this centre, openwork geometric shapes balance the composition. This panel is perfect for dressing a terrace, filtering a view, or separating two areas without blocking the light.

Laser cut to your specifications and made in France, it is crafted as a single piece of sheet metal including its solid frame. You can select the material, thickness, and size using our configurator. Its symmetrical design means it can be oriented however you like for your project: the totem looks great either way up, so no one will feel offended by the direction.

Art Deco Totem: a symmetrical decorative metal screen

At the centre of the panel, a column holds three rings strung like beads at the top and bottom. The side columns take the form of elongated ogives, filled with diamond cross-hatching and topped with chevron points. Halfway up, a large diamond cross-hatch connects the columns. On the edges, triangles point inwards, all enclosed by a solid frame.

The composition is symmetrical from top to bottom and left to right. This repetition gives the motif its balance, while the openwork allows air and light to flow through. The panel filters sightlines without completely closing off the perspective: the totem lines remain visible, and their shadows add a touch of geometry to your decor.

This panel joins our selection of garden screen panels, ideal for adding rhythm to a fence or an outdoor layout.

Choose your material for your custom privacy screen

The material gives your art deco totem privacy screen its character and determines where it can be installed. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains its natural grey-black hue for a sober finish. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, rust-proof, and easy to handle.

A custom-sized screen for your space

Whether for a pergola opening, a section of fencing, or a room divider, you can choose the dimensions of your art deco totem privacy screen in the configurator. The proportions of the motif are preserved: the central column and side ogives maintain their balance. The configurator will block sizes that are too small for the chosen thickness to ensure the stability of the openwork elements.

Before ordering your custom piece, measure the area to be covered and identify your fixing points. If you plan to install several panels side by side, choosing the same size allows the pattern's rhythm to continue seamlessly. A cardboard template can help you visualise the panel in its location; it is less spectacular than a totem, but very practical.

Have another pattern in mind? You can also upload your own DXF to have it laser cut.

Indoor or outdoor installation

Outdoors, this metal privacy screen can add rhythm to a fence, shield a dining area from prying eyes, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel all withstand rain. An openwork outdoor screen also allows air to circulate while clearly defining the space.

Indoors, the panel can subtly separate an entrance from a living room, structure a home office, or dress up a staircase without darkening the room. Raw steel fits perfectly here with its natural grey-black appearance, while stainless steel and aluminium are also excellent for interior decor.

Corten steel is reserved for the exterior. Its rust patina forms over time and can run off during rain; indoors, it would stain walls and floors. In the garden, its warm tones pair beautifully with brick and greenery, as it is for outdoors only.

Fixing and maintenance

The design does not include fixing holes. Installation is done via the frame onto posts, a chassis, a wall, or a pergola, using screws suited to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not included. If you require holes to be pre-cut, please send your own file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. For stainless steel, a suitable cleaner applied in the direction of the brushing will revive the shine. Galvanised steel and anodised aluminium require little attention; corten patinas naturally outdoors over time. Avoid abrasive sponges and chlorine-based products.

For your art deco totem privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The totem is ready to watch over your space.

FAQ about the art deco totem privacy screen

Can the art deco totem privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc coating. Corten is specifically for the exterior, where its patina develops. Raw steel is better suited for indoors as it can oxidise in humid air. This panel is great for garden walls or terrace boundaries.

Can corten steel be installed indoors?

No. Corten protects itself with a layer of rust that continues to evolve and can drip with moisture. Indoors, this would risk staining your walls and floors. This material is therefore for outdoors only, such as in a garden or on a facade. For interior rooms, brushed stainless steel, anodised aluminium, or raw steel are the right options.

What size should I choose for a screen panel?

You select the size in the configurator, and the design proportions remain constant. Identify the area to be covered, measure the available space, and consider the height needed to filter views. If aligning multiple panels, keeping the size identical ensures a regular pattern. A cardboard template or masking tape helps you visualise the final result.

How do I fix this metal screen?

The design does not feature pre-cut fixing holes. The panel is mounted by its frame onto posts, a chassis, a wall, or a pergola, using screws chosen based on the support and the weight of the piece. It is supplied without accessories: you will need to provide your own screws, plugs, posts, and brackets.

Brushed stainless or raw steel: which one to choose?

Brushed stainless steel, available from 1 to 4 mm, is corrosion-resistant and works both inside and out. Raw steel, from 2 to 20 mm, provides a natural grey-black tone and is primarily for indoor use. Anodised aluminium is lightweight and rust-proof. Corten, available in 1.5 mm, patinas outdoors and is reserved for the exterior.

Galvanised or anodised aluminium for outdoor use?

Both materials are suitable for outdoor use. Galvanised steel is protected by zinc; a thickness of at least 1.5 mm is recommended for outdoors. Anodised aluminium is lightweight and does not rust, with available thicknesses from 1.5 to 2 mm. The choice depends on the desired aesthetic and the support used for installation.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is enough for general cleaning. For brushed stainless steel, a stainless steel cleaner applied in the direction of the grain helps revive the satin look. Avoid abrasive sponges and chlorine products. Corten requires no special maintenance: its patina forms naturally outdoors over time.

Can I have my own design laser cut?

Yes. You can upload your DXF file to john-steel.com to have it laser cut in the material and thickness of your choice. This is useful for creating a unique pattern or including specific fixing holes for your support. Bending services are also available for both individuals and professionals directly on the website.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.