Custom metal privacy screen - Art Deco Plumes
  • Custom metal privacy screen - Art Deco Plumes
  • Custom metal privacy screen - Art Deco Plumes
  • Custom metal privacy screen - Art Deco Plumes
  • Custom metal privacy screen - Art Deco Plumes

Custom metal privacy screen - Art Deco Plumes

Art deco plume privacy screen: fans opening upwards

The art deco plume privacy screen adds a bold graphic touch to your garden or interior. Four small fan-shaped plumes, solid at the centre, sit atop elongated large diamonds. Fine-lined St Andrew's crosses and chevrons complete the design. Its wide open-work filters views while letting light flow through freely.

Laser-cut to your specifications and made in France, this panel is crafted from a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. Please note the pattern has a specific orientation: the plumes open upwards, a useful detail to remember during installation.

Art Deco Plumes: fans, diamonds and fine lines

Four small fan-shaped plumes punctuate the art deco plume privacy screen. Solid at the centre, they are arranged in pairs across two levels, perched atop large elongated diamonds. Surrounding them, St Andrew's crosses and chevrons drawn with fine lines structure the composition. The lines remain delicate and the openings are large, creating an airy feel. A sturdy frame surrounds the entire motif.

The panel is symmetrical from left to right, but not from top to bottom: the plumes open upwards. Therefore, it has a distinct top and bottom to respect during fitting. The open spaces allow air and light to pass through while softening the view. The sun will dance through the cut-outs; it is up to you to decide where it draws its patterns.

This decorative metal screen joins our selection of garden panels, perfect for dressing up a fence or structuring an outdoor area.

Choose your material for your custom privacy screen

The material gives character to your art deco plume privacy screen and determines where it can be installed. For a large-scale metal privacy screen, a greater thickness provides better rigidity, where available for the chosen material.

Material Available thicknesses Installation
Brushed stainless steel 1 to 4 mm Indoor or outdoor
Raw steel 2 to 20 mm Preferably indoor
Galvanised steel 1 to 3 mm Indoor, or outdoor (1.5 mm minimum)
Anodised aluminium 1.5 to 2 mm Indoor or outdoor
Corten steel 1.5 mm Outdoors only

Brushed stainless steel offers a satin, luminous look and excellent corrosion resistance. Raw steel retains its natural grey-black hue for an industrial vibe. Protected by zinc, galvanised steel features a discreet matte grey. Lightweight anodised aluminium does not rust and is easy to handle.

A custom privacy screen adapted to your space

Whether it is a pergola opening, a section of fencing, or a room divider, every project has its own proportions. Enter your desired size in the configurator; the motif proportions are maintained so that the plumes, diamonds, and lines keep their balance. The configurator also accounts for the limits related to the chosen material and thickness.

Before ordering your custom privacy screen, measure the area and visualise the panel in its environment. A cardboard template or a few temporary marks on the wall can help you gauge the final result. For several panels side by side, use identical sizes to maintain a regular rhythm. The pattern simply requires that the top stays at the top: the plumes have a specific reading direction.

This way, you adapt the panel to your project, not the other way around. Do you have a personal design you want cut? You can upload your own DXF.

Indoor or outdoor installation

Outdoors, this metal privacy screen can dress up a fence, protect a dining area from prying eyes, or add rhythm to a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain in the appropriate thicknesses. An open-work outdoor privacy screen defines the space without closing it off completely.

Indoors, the panel creates a light separation between an entrance and a living room, structures an office nook, or decorates a wall. Raw steel is well-suited for this with its dark tone. The large openings preserve light circulation, and the vertical motif draws the eye up towards the open plumes.

Corten steel is for outdoors only, as its rusted patina can run during rain and stain walls or floors. In the garden, its warm tones naturally complement brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, a wall, or a pergola, using screws suited to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If your installation requires holes, you can include them in your DXF file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On stainless steel, a suitable cleaner applied in the direction of the brushing revives the satin look. Corten patinas naturally outdoors. Avoid abrasive sponges and chlorine-based products, which could mark the surfaces.

For your art deco plume privacy screen, choose the material, thickness and size, then click on « Configure & buy ». Keep the fans facing upwards, and your decor is ready to take flight.

FAQ about the art deco plume privacy screen

Can the art deco plume privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium are suitable for outdoors, as is galvanised steel from the appropriate thickness. Corten is for outdoors only and patinas over time. Raw steel is primarily intended for indoors, as moisture can promote oxidation. This open-work panel can thus define a garden corner or dress up a fence.

Can corten steel be used indoors?

No. The corten patina forms over time and can run when in contact with rain or moisture. It may then stain walls, floors, or textiles. This material is therefore for outdoors only. For an interior separation, you can choose brushed stainless steel, anodised aluminium, or raw steel depending on the desired look.

What size should I choose for a privacy screen?

The size is selected in the configurator, which maintains the proportions of the motif. Measure the space to be dressed, identify the views to be filtered, and consider the distance from which you will view the panel. To visualise the footprint, a cardboard template is very useful. If aligning several panels, choose identical sizes for a consistent look.

How do I fix a metal privacy screen?

The panel does not have fixing holes. It is installed by its frame onto posts, a chassis, or a wall, using screws chosen according to the support and the weight of the piece. It is supplied without accessories: screws, plugs, and posts are not provided. Remember to orient the plumes upwards during installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel, available from 1 to 4 mm, has a satin appearance and is suitable for both indoors and outdoors. Raw steel, from 2 to 20 mm, offers a grey-black hue and is mainly for indoors. Anodised aluminium is lightweight and rust-proof; galvanised steel offers a matte grey. Corten develops a warm patina but must stay outside.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by its zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for outdoor installation, in 1.5 to 2 mm. Both materials are appropriate options for a garden screen panel, taking into account your project's fixing constraints.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is enough for routine maintenance. For brushed stainless steel, use a suitable cleaner following the direction of the brushing. Corten patinas naturally outdoors. Avoid abrasive sponges and chlorine products to preserve the surface appearance. Regular maintenance remains simple, even within the cut-outs of the design.

Can I have my own design laser-cut?

Yes, you can submit your own DXF file on john-steel.com. The design is laser-cut in the chosen material and thickness. This is a practical solution for creating a personalised motif or planning fixing holes adapted to your support. The configurator allows you to prepare your project before launching the cutting process.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.