Custom metal privacy screen - Art Deco Frost
  • Custom metal privacy screen - Art Deco Frost
  • Custom metal privacy screen - Art Deco Frost
  • Custom metal privacy screen - Art Deco Frost
  • Custom metal privacy screen - Art Deco Frost

Custom metal privacy screen - Art Deco Frost

Art deco frost privacy screen: sharp crystal lines

The art deco frost privacy screen transforms a perforated panel into a striking graphic feature. Sharp triangles and diamonds assemble into burst stars, mimicking frost crystals. Aligned in horizontal bands, they are connected by long vertical rods and parallel bar strips. These fine lines give the design a vivid, angular momentum, filtering views without closing off your space.

Laser cut to your specifications and made in France, this panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. Symmetrical from top to bottom and left to right, it maintains its balance regardless of the installation direction: frost, after all, never gets the season wrong.

Art Deco Frost: geometric stars in a decorative metal screen

The pattern consists of horizontal bands of burst stars. Their triangular points and diamonds evoke frost crystals, with clean lines that intersect and open around each shape. Long vertical rods link the bands, while parallel bar strips extend the rhythm of the design. The frame surrounds these openings, forming a single piece of metal with the pattern.

The tracing is fine, sharp, and angular. The dual-direction symmetry gives the panel a balanced composition, while the solid metal and open spaces allow light and sightlines to flow through. It creates a decorative separation or a garden screen without feeling heavy. The shadows extend its angles throughout the day, like a small piece of seasonal geometry.

This panel joins our selection of garden panels, designed to structure outdoor spaces with perforated patterns.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material defines the character of your art deco frost privacy screen and helps determine its best location. A light finish highlights the lines and openings; a darker material makes the crystals pop against a light background. For a large-scale metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion. Raw steel retains the natural grey-black hue of the metal for a bold statement. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and rust-proof.

A custom privacy screen tailored to your space

Whether it is for a fence, a pergola opening, or a room divider: every location has its own proportions. Enter your desired size in the configurator and the pattern proportions will be preserved, ensuring the stars remain sharp and the bands keep their rhythm.

Before ordering your art deco frost privacy screen, identify the area to be dressed and measure the available space. Consider the distance and the viewing angle: a panel intended for privacy is not chosen the same way as a simple decorative accent. For several panels side by side, keep the same size to extend the horizontal bands regularly. The configurator will block sizes that are too small for the selected thickness.

Your custom privacy screen thus adapts perfectly to your project. Have you drawn a different pattern or wish to add your own details? You can also upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this metal screen can add rhythm to a fence, visually shelter a dining area, or dress up a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. An outdoor privacy screen with crystalline shapes provides a graphic separation while letting air and light pass through.

Indoors, the panel creates a light separation between an entrance and a living room, structures an office nook, or dresses a wall. Raw steel fits perfectly here with its natural grey-black appearance; stainless steel and aluminium provide a brighter finish. The perforated pattern marks the space without turning it into a gift box.

Corten steel is reserved for outdoors only. Its rust patina forms over time and can run off with rain: it would stain walls and floors indoors. Outside, its warm tones pair beautifully with a brick wall and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If you require holes, you can include them in your own DXF file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On brushed stainless steel, use a stainless steel cleaner in the direction of the brushing. Avoid abrasive sponges and chlorine products, which may mark the surface. Corten patinates naturally outdoors; there is no need to blow snowflakes on it.

For your art deco frost privacy screen, choose the material, thickness, and size, then click "Configure & buy". Its graphic crystals are ready to take their place in your home.

FAQ about the art deco frost privacy screen

Can the art deco frost privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for outdoors and patinates over time. Raw steel is primarily intended for indoors, as it can oxidise in humid air. The perforated pattern is ideal for dressing a fence or structuring a terrace.

Can corten steel be installed indoors?

No. Corten protects itself with a layer of rust that continues to form and can run off with humidity. Indoors, it would risk staining walls, floors, or textiles. This material is reserved for outdoors, such as in the garden or on a facade. For a room, choose brushed stainless steel, anodised aluminium, or raw steel instead.

What size should I choose for a screen panel?

You choose the size in the configurator and the pattern proportions are preserved. Identify the area to be dressed, the views to be filtered, and the distance from which you will see the panel. If installing several panels side by side, use the same size to maintain a regular rhythm between the star bands. A cardboard template helps visualise the effect before ordering.

How do I fix this metal screen?

The design does not include fixing holes. The panel is mounted by its frame onto posts, a chassis, or a wall, using screws suitable for the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets are not provided. Ensure you have a stable support and check its compatibility with your installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a luminous look and is suitable for both indoors and outdoors. Raw steel (2 to 20 mm) keeps a natural grey-black hue for a bolder look, primarily for indoors. Anodised aluminium is lightweight and rust-proof. Corten (1.5 mm) develops a warm patina but is reserved for outdoors.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel is protected by a zinc layer; for outdoors, a thickness of at least 1.5 mm is recommended. Anodised aluminium is lightweight and rust-proof, making it an excellent choice for a garden or terrace screen. In both cases, the crystal pattern retains its perforated design and lets light through.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually enough to remove dust. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Avoid abrasive sponges and chlorine products. Corten patinates naturally outdoors; its surface evolves with the weather and requires no specific cleaning.

Can I have my own design laser cut?

Yes. Send your DXF file to john-steel.com to have it laser cut in the material and thickness of your choice. This is useful if you wish to create a matching pattern, adjust the composition, or include fixing holes absent from the standard design. Ensure you provide a usable file and check its dimensions before sending.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.