Custom metal privacy screen - Art Deco Colonnade
  • Custom metal privacy screen - Art Deco Colonnade
  • Custom metal privacy screen - Art Deco Colonnade
  • Custom metal privacy screen - Art Deco Colonnade
  • Custom metal privacy screen - Art Deco Colonnade

Custom metal privacy screen - Art Deco Colonnade

Art deco colonnade privacy screen: orderly vertical lines

The art deco colonnade privacy screen brings a graphic rhythm to your living space. Its vertical columns of stacked chevrons and elongated hexagons rise across the full height; interlocking diamonds occupy the centre, while smaller diamonds punctuate the corners. It filters views without completely closing off the space, whether in a garden or inside your home.

Laser cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size using the configurator. Please note that the design has a specific top and bottom to be respected during installation: the columns prefer to keep their poise.

Art Deco Colonnade: openwork chevrons, hexagons and diamonds

Vertical columns compose the pattern across the entire height. They alternate between stacked chevrons and elongated hexagons, creating a regular rhythm that guides the eye from bottom to top. In the centre, several diamonds nest within one another, while smaller diamonds in the corners complete the design. The straight lines, of medium thickness, give the panel a sharp and clean presence.

The pattern is symmetrical from left to right. While the top and bottom look similar, they are not identical; therefore, it has a specific installation direction to maintain the intended composition. Cut from a single piece of metal with its frame, the art deco colonnade privacy screen maintains a coherent silhouette. The openwork allows light and air to pass through while effectively filtering sightlines.

This decorative metal screen joins our selection of garden panels. Its columns will bring a lovely sense of order to your decor, even if nobody will actually ask you to stand at attention.

Choose your material for your custom privacy screen

The material defines the tone of your art deco colonnade privacy screen and determines where it can be installed. For a large-scale metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion well. Raw steel retains the natural grey-black hue of the metal, perfect for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, does not rust, and is easy to handle.

A custom privacy screen tailored to your space

A pergola opening, a section of fencing, or a divider between two rooms: every location has its own proportions. You enter the desired size in the configurator, and the pattern proportions are maintained so that the columns, chevrons, and diamonds keep their balance.

Before ordering your art deco colonnade privacy screen, identify the area to be dressed and the distance from which the panel will be viewed. Take into account any posts or supports already in place. If you plan to install several panels side by side, keep the same size to ensure the vertical rhythm remains regular. The configurator will block sizes that are too small for the chosen thickness.

Your custom privacy screen thus adapts to the project you have in mind. Do you want a personal design? You can also upload your own DXF to have it laser cut.

Indoor or outdoor: where to install your garden screen panel

Outdoors, this metal screen can protect a dining area from prying eyes, dress up a fence, or structure a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. An outdoor privacy screen composed of vertical lines creates a graphic landmark near a wall or a hedge.

Indoors, the panel can separate an entrance from the living room, structure a room, or dress up a staircase without blocking the light. Raw steel fits perfectly here with its natural grey-black appearance; stainless steel and aluminium are also suitable for living spaces.

Corten steel is for outdoors only. Its rust patina forms over time and can run off with rain; indoors, it would stain walls and floors. In the garden, its warm tones pair beautifully with brick and ivy.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, a wall, or a pergola, using screws suitable for the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you require holes to be pre-cut, please send your own file.

Maintenance remains simple: a slightly damp microfibre cloth is usually enough. For stainless steel, a suitable cleaner applied in the direction of the brushing restores the shine. Corten patinates outdoors without requiring any particular intervention.

For your art deco colonnade privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». Your columns are ready to take their place.

FAQ about the art deco colonnade privacy screen

Can the art deco colonnade privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel, anodised aluminium, and galvanised steel are suitable for outdoors; the latter benefits from a protective zinc layer. Corten is reserved for the exterior and patinates over time. Raw steel is intended for indoor use, as it can oxidise in humid air. The panel can thus dress a fence or protect a terrace corner.

Can corten steel be used indoors?

No. The rust patina that protects corten continues to form and can run off with moisture. Indoors, it would risk staining walls and floors. This material is therefore for outdoors only, for example in a garden or on a facade. For a room divider, please choose brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a privacy screen panel?

The size is selected in the configurator, and the pattern proportions are preserved. Measure the space to be dressed, identify the area to be shielded from view, and consider the distance from which you will see the panel. If aligning several, use identical sizes to maintain a regular rhythm. A cardboard template helps visualise the result.

How do I fix a metal privacy screen?

The design does not feature fixing holes. The panel is installed by its frame onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the piece. It is supplied without accessories: screws, plugs, posts, and brackets are not included. Simply ensure the stability of the support before installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a luminous look and suits both indoor and outdoor use. Raw steel (2 to 20 mm) reveals a strong grey-black hue, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but is for outdoors only.

Do galvanised steel or aluminium resist outdoor conditions?

Yes. Galvanised steel has a zinc layer that protects it from red rust; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and its anodised layer protects the surface. Both materials are therefore suitable for a garden or terrace screen, depending on the available thicknesses.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is sufficient most of the time. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Corten patinates on its own outdoors and requires no special maintenance. Avoid abrasive sponges and chlorinated products, which may mark the surface of the panel.

Can I have my own design laser cut?

Yes. You can upload your DXF file to john-steel.com to have it laser cut in the material and thickness of your choice. This is a practical solution for creating a personalised pattern or planning fixing holes adapted to your support. Bending services are also offered directly on the site for both individuals and professionals.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.