Custom metal privacy screen - Art Deco Rays
  • Custom metal privacy screen - Art Deco Rays
  • Custom metal privacy screen - Art Deco Rays
  • Custom metal privacy screen - Art Deco Rays
  • Custom metal privacy screen - Art Deco Rays

Custom metal privacy screen - Art Deco Rays

Art deco ray privacy screen: two suns in airy lines

An art deco ray privacy screen brings a graphic play of light to your space. Two large radiant suns are stacked within the panel: from each point, fine rays spread out in a fan shape, intersected by large concentric arcs. The design remains airy, with wide openings that filter views without completely closing off the space.

Laser cut to your specifications and made in France, this panel is a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. It is symmetrical from left to right, but has a specific top and bottom to respect during installation: the suns have a direction, just like your interior design.

Art Deco Rays: a decorative metal screen with two suns

The pattern is organised around two large stacked radiant suns. From each point, fine lines spread in a fan; large concentric arcs intersect them and give rhythm to the composition. At the top, the rays stretch to the corners of the frame. The overall effect combines delicate lines and large voids for a decorative panel that maintains a sense of lightness.

The art deco ray privacy screen is symmetrical from left to right, but not from top to bottom. Therefore, it has a top and a bottom that must be respected during installation. Its open silhouette allows air and light to pass through while creating a strong graphic presence. The rays put on a little show in the sun, without requiring an entrance ticket.

This panel joins our selection of garden screen panels for those looking to arrange an outdoor area with a geometric, openwork decor.

Brushed stainless, raw steel, galva, alu or corten: choose your material

The material gives the art deco ray privacy screen its character and determines where it can be installed. A light finish highlights the fine rays, while a darker metal makes them stand out against a bright background. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesWhere to install
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion well. Raw steel retains the natural grey-black hue of the metal for an industrial feel. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

A pergola opening, a section of fencing, or a room divider: every location has its own proportions. You enter the desired size in the configurator, and the design maintains its proportions so that the two suns and their fan of rays keep their balance.

Before ordering your art deco ray privacy screen, identify the area to be dressed and the angle from which you will view it. Consider the distance, the posts, and the planned support. If you align several panels, choose consistent sizes to extend the rhythm of the pattern. The configurator will block sizes that are too small for the chosen thickness to ensure the fine rays remain sturdy.

Your custom privacy screen thus adapts to your project. Have you imagined a different pattern? You can also upload your own DXF to have it laser cut.

Indoor or outdoor privacy screen: where to install it

Outdoors, this metal screen can dress up a fence, protect a dining area from prying eyes, or structure a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand the rain. An outdoor privacy screen with radiating lines brings a graphic decor to the garden without making it feel heavy.

Indoors, the panel creates a light separation between two spaces, dresses up an entrance, or decorates a wall while letting light circulate. Raw steel fits perfectly here with its dark, natural appearance. Its rays bring movement to the decor, even when the room is perfectly still.

Corten steel is reserved for outdoors only. Its patina forms over time and can run with the rain; it would stain walls and floors indoors. Outside, its warm tones blend beautifully with brick and greenery.

Fixing and maintenance

The design does not include fixing holes. The panel is installed by its frame onto posts, a chassis, a wall, or a pergola, using screws adapted to the support and the weight of the piece. Supplied without accessories: screws, wall plugs, posts, and fixing brackets must be provided by you. If you require holes to be pre-cut, please send your own file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Corten patinates naturally outdoors and requires no special care.

For your art deco ray privacy screen, choose the material, thickness, and size, then click 'Configure & buy'. All that's left is to let the light in.

FAQ about the art deco ray privacy screen

Can the art deco ray privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium are suitable for outdoors, as is galvanised steel, which is protected by a zinc layer. Corten is reserved for the outdoors where it develops its patina. Raw steel is intended for indoors, as it can oxidise in humid air. The panel can thus dress up a fence or a terrace corner.

Can corten steel be used indoors?

No. The patina of corten continues to form and can run with humidity; it would risk staining walls, floors, and textiles. This material is therefore reserved for outdoors only. For a separation inside the home, choose brushed stainless steel, anodised aluminium, or raw steel, depending on the desired look and intended use.

What size should I choose for a screen panel?

The size is chosen in the configurator, which preserves the proportions of the two suns and their rays. Measure the space to be dressed, identify the fixing points, and consider the distance from which you will view the panel. To visualise the result, you can mark the outline with masking tape or a cardboard template.

How do I fix this metal screen?

The design contains no fixing holes. The panel is fixed by its frame to a suitable support, such as posts, a chassis, or a wall, with screws chosen according to the support and the weight. It is supplied without accessories: screws, plugs, posts, and brackets are not provided.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) has a satin look and is suitable for both indoors and outdoors. Raw steel (2 to 20 mm) shows a natural grey-black hue, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust; corten (1.5 mm) develops a warm patina, only outdoors.

Galva or anodised aluminium for outdoor use?

Both can work outdoors. Galvanised steel is protected by a zinc layer; for outdoor use, a minimum thickness of 1.5 mm is recommended. Anodised aluminium is lightweight and does not rust. The choice depends on the desired finish and the material best suited to your support. The configurator shows available thicknesses for each metal.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is suitable for routine maintenance. For brushed stainless steel, use a suitable cleaner in the direction of the brushing to preserve its satin appearance. Avoid abrasive sponges and chlorine products. Corten evolves naturally outdoors and requires no special care to form its patina.

Can I have my own design laser cut?

Yes, you can send your DXF file via john-steel.com to have it laser cut in the desired material and thickness. This is useful if you have designed a different pattern or wish to include specific openings for your project. The file must follow the preparation guidelines indicated on the upload page.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.