Custom metal privacy screen - Art Deco Triangles
  • Custom metal privacy screen - Art Deco Triangles
  • Custom metal privacy screen - Art Deco Triangles
  • Custom metal privacy screen - Art Deco Triangles
  • Custom metal privacy screen - Art Deco Triangles

Custom metal privacy screen - Art Deco Triangles

Art deco triangle privacy screen: a rain of facets

The art deco triangle privacy screen brings a sharp, graphic rhythm to your living space. Downward-pointing triangles, each paired with a smaller internal triangle, overlap and interlock across the entire surface like a rain of facets. Their staggered arrangement creates a vibrant design without a central axis. This perforated panel is perfect for dressing up a fence, shielding a terrace corner from prying eyes, or dividing two rooms while letting light flow through.

Laser cut to your specifications and made in France, it is crafted as a single piece of sheet metal including its frame. You can choose the material, thickness, and size using our configurator. Please note that the pattern has a specific top and bottom: keep this in mind during installation, as the triangles have a set direction of travel.

Art Deco Triangles: a decorative metal screen with a faceted look

Across the entire surface of the art deco triangle privacy screen, the downward-pointing triangles overlap and interlock. Each contains a smaller triangle, creating repeated contours that give the panel its signature faceted effect. The patterns are offset from one another, allowing the eye to move from one triangle to the next without hitting a central axis. The straight lines maintain a consistent thickness, and the frame is part of the same single piece of metal.

The cut-outs form a dense and lively mesh. The panel filters views while allowing air and light to pass through; depending on the time of day, the lines project geometric shapes onto the surrounding area. When installing, respect the top and bottom of the design to maintain the intended orientation. This art deco screen is available in our garden panels section.

A privacy panel can structure a terrace, dress up a fence, or mark a separation without completely closing off the space. Its geometric design adds movement, even when the panel remains perfectly still: these facets certainly know how to hold a conversation.

Brushed stainless steel, raw steel, galvanised, aluminium or corten

The material gives the art deco triangle privacy screen its character and determines where it can be installed. For a large metal privacy screen, a slightly thicker gauge provides better rigidity, where available for the chosen material.

MaterialAvailable thicknessesInstallation
Brushed stainless steel1 to 4 mmIndoor or outdoor
Raw steel2 to 20 mmPreferably indoor
Galvanised steel1 to 3 mmIndoor, or outdoor (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoor or outdoor
Corten steel1.5 mmOutdoors only

Our brushed stainless steel offers a satin, luminous appearance with excellent corrosion resistance. Raw steel retains its natural grey-black hue for an industrial look. Galvanised steel is protected by a zinc layer and features a matte grey finish. Lightweight anodised aluminium does not rust.

A custom privacy screen tailored to your space

Simply enter your desired dimensions in the configurator: the proportions of the pattern are preserved so that the triangles keep their rhythm. Measure your pergola opening, fence section, or the area to be screened, then consider the clearance and the elements that will support the frame.

If you are installing several panels side by side, choose the same size to maintain visual continuity. The configurator will block sizes that are too small for the selected thickness, preventing thin lines from trying to act like weightlifters.

Your custom privacy screen thus adapts perfectly to your project. If you have imagined a different design, you can also upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this metal screen can add rhythm to a fence, preserve a dining area from view, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel are all suitable for the exterior. An outdoor privacy screen in perforated metal allows air to circulate while clearly marking the boundaries of your space.

Indoors, the panel creates a light separation between an entrance and a living room, or structures an office nook without blocking the light. Raw steel is ideal here with its dark, natural appearance; stainless steel and anodised aluminium are also suitable depending on the desired aesthetic.

Corten steel is reserved for outdoors only, as its patina develops over time and can run off during rain. Indoors, it could stain your walls and floors. Outside, its warm tones pair beautifully with brick and greenery.

Installation and maintenance

The design does not include pre-drilled fixing holes. Installation is done via the frame, onto posts, a chassis, a wall, or a pergola, using screws suited to the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and brackets must be provided by you.

Routine maintenance is simple: a slightly damp microfibre cloth is usually enough. For brushed stainless steel, use a suitable cleaner in the direction of the brushing. Corten patinates outdoors without any special maintenance; avoid abrasive sponges and chlorine-based products on other surfaces.

For your art deco triangle privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». The facets are waiting for their new home.

FAQ about the art deco triangle privacy screen

Can the art deco triangle privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium are suitable for outdoors, as is galvanised steel from the recommended thickness upwards. Corten is reserved for the exterior, where its patina can develop. Raw steel is intended for indoor use, as it can oxidise with humidity. This perforated panel can thus dress up a fence or protect a terrace.

Can corten steel be used indoors?

No. The rust patina of corten continues to form and can run off with humidity. Indoors, it would risk staining your walls and floors. This material is therefore for outdoors only, such as in the garden or on a terrace. For an indoor separation, prefer brushed stainless steel, anodised aluminium, or raw steel depending on the look you want.

What size should I choose for a privacy panel?

The size is selected in the configurator, which maintains the proportions of the pattern. Measure the space to be covered and think about the views you wish to filter as well as the distance from which you will see the panel. To align multiple pieces, keep the size identical. A cardboard template or masking tape on the floor helps visualise the footprint before ordering.

How do I fix a metal privacy screen?

The panel does not have fixing holes. It is installed by its frame onto posts, a chassis, a wall, or a pergola, using screws adapted to the support and weight. The piece is supplied without accessories: screws, plugs, and posts are not provided. Also, check the orientation of the design, which has a top and bottom, before fixing the frame.

Brushed stainless steel or raw steel: which one to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and works both inside and out. Raw steel (2 to 20 mm) keeps a grey-black hue and is installed preferably indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but is only intended for outdoor use.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by zinc; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for a garden or terrace screen. The choice depends on the desired look and weight. Remember to adapt the fixing to the support, as installation accessories are not provided with the panel.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is generally sufficient to remove dust. On brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Corten patinates outdoors without any particular maintenance. Avoid abrasive sponges and chlorine products, which can mark the surfaces. Occasional cleaning helps keep the cut-outs clean and sharp.

Can I have my own design laser cut?

Yes, you can submit your own DXF file on john-steel.com for cutting in the desired material and thickness. This is useful if your project requires a specific drawing or pre-planned fixing holes in the file. Ensure the trace is usable before sending. The dedicated configurator will guide you through uploading your design and preparing your request.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.