Custom metal privacy screen - Art Deco Bulbs
  • Custom metal privacy screen - Art Deco Bulbs
  • Custom metal privacy screen - Art Deco Bulbs
  • Custom metal privacy screen - Art Deco Bulbs
  • Custom metal privacy screen - Art Deco Bulbs

Custom metal privacy screen - Art Deco Bulbs

Art deco bulb privacy screen: an organic and rhythmic motif

The art deco bulb privacy screen brings an organic touch to your decor. Rounded bulbs, detailed with fine vertical ribs, are topped with solid arcs resembling lotus flower buds. Large and small bulbs alternate in a staggered pattern across the entire height: generous solid areas sit alongside thin bars to filter views while letting light flow through.

Laser cut to your specifications and made in France, this panel is crafted from a single piece of sheet metal including its frame. You can choose the material, thickness, and size in the configurator. The pattern is symmetrical from left to right, but since the arcs top the bulbs from above, it has a specific top and bottom that must be respected during installation.

Art Deco Bulbs: a decorative metal screen with botanical accents

Throughout the height, the rounded bulbs alternate in a staggered layout. Fine vertical ribs add rhythm to their surface, while a solid arc crowns them like a lotus bud. Large and small volumes respond to each other in a regular composition, balancing generous solids with slender bars. The frame is integral to the design: the entire piece is cut from a single sheet of metal.

The symmetry is read from left to right. However, the arcs crown the bulbs from the top: this panel has a specific orientation, with a top and bottom to follow. Its organic and rhythmic design filters sightlines without turning your space into a closed box. It is essentially geometric botany, with no watering required.

This panel joins our selection of garden screen panels, perfect for dressing up a fence or creating a decorative separation.

Brushed stainless, raw steel, galva, alu or corten: choose your material

The material gives character to your art deco bulb privacy screen and determines where it can be installed. The fine ribs and solid arcs create a contrast that looks different depending on the metal's finish. For a large metal privacy screen, a slightly thicker gauge provides better stability, where available for the chosen material.

MaterialAvailable thicknessesWhere to install
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion well. Raw steel retains the natural grey-black hue of the metal for a sober finish. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight and does not rust.

A custom privacy screen tailored to your space

Whether it is for a fence, a pergola opening, or a room divider, every location has its own proportions. You enter the desired size in the configurator, and the pattern proportions are maintained so that the alternation of large and small bulbs remains balanced.

Before ordering your art deco bulb privacy screen, measure the space to be filled and consider the distance from which you will view the panel. To align several panels, keep the same size so that the rhythm of the motif continues seamlessly. The configurator prevents sizes that are too small for the chosen thickness to ensure the thin bars remain sturdy.

Your custom privacy screen adapts to your project and its location. Have you imagined a different design? You can also upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this metal screen can add rhythm to a fence, protect a dining area from prying eyes, or dress up a garden wall. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. An outdoor screen in stainless or aluminium maintains its appearance through the seasons, while the curves of the bulbs provide a decorative presence.

Indoors, the panel can subtly separate an entrance from a living room or structure a space without blocking all the light. Its openwork design also fits perfectly into a decorative partition. Raw steel is well-suited for these uses, with its dark tone and direct character.

Corten steel is for outdoors only. Its rust patina forms over time and can run off with rain; indoors, it would stain walls and floors. In the garden, its warm tones pair beautifully with brick and greenery.

Fixing and maintenance

The design does not include fixing holes. Installation is planned via the frame, onto posts, a chassis, or a wall, using screws suitable for the support and the weight of the panel. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If you wish to integrate holes, you can submit your own DXF file.

For routine maintenance, a slightly damp microfibre cloth is sufficient. On stainless steel, a suitable cleaner applied in the direction of the brushing restores the shine. Corten patinates outdoors without any particular treatment: it prefers to live its life quietly.

For your art deco bulb privacy screen, choose the material, thickness, and size, then click on « Configure & buy ». Its curves will bring rhythm to your space.

FAQ about the art deco bulb privacy screen

Can the art deco bulb privacy screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten steel is reserved for the outdoors and patinates naturally. Raw steel should generally be kept indoors, as it oxidises in humid air. You can thus install the panel on a fence or near a terrace area.

Can corten steel be used indoors?

No. Corten protects itself with a layer of rust that continues to form and can run with humidity. Indoors, this would risk staining walls and floors. This material is therefore for outdoors only, for example in the garden or on a facade. For a separation inside the home, prefer brushed stainless steel, anodised aluminium, or raw steel.

What size should I choose for a screen panel?

The size is selected in the configurator, and the pattern proportions are preserved. Measure the space to be filled, identify the views to be filtered, and consider the distance from which you will view the panel. To align several, choose the same size to maintain a regular rhythm. A cardboard template helps visualise the result before ordering.

How do I fix a metal privacy screen?

The design does not feature fixing holes. The panel is installed by its frame onto posts, a chassis, or a wall, using screws adapted to the support and the weight of the piece. It is supplied without accessories: screws, plugs, and posts must be provided by you. Remember to respect the top and bottom of the motif during installation.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a satin look and is suitable both inside and out. Raw steel (2 to 20 mm) provides a grey-black hue, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but is for outdoors only.

Are galvanised steel or aluminium suitable for outdoors?

Yes. Galvanised steel is protected by a zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and is also suitable for outdoor installation. Both materials allow you to install your screen in the garden or on a terrace. Corten is also designed for the outdoors, with its evolving patina.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is enough for routine cleaning. For brushed stainless steel, use a suitable cleaner and wipe in the direction of the brushing. Avoid abrasive sponges and chlorine products, which can mark the surface. Corten requires no special treatment: its patina forms outdoors over time.

Can I have my own design laser cut?

Yes. You can send your DXF file via john-steel.com: it will be laser cut in the material and thickness of your choice. This is useful for creating a matching panel or planning fixing holes adapted to your project. Ensure your drawing respects the cutting constraints before submitting. The service is available for both individuals and professionals.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.