Custom metal privacy screen - Art Deco Sunrise
  • Custom metal privacy screen - Art Deco Sunrise
  • Custom metal privacy screen - Art Deco Sunrise
  • Custom metal privacy screen - Art Deco Sunrise
  • Custom metal privacy screen - Art Deco Sunrise

Custom metal privacy screen - Art Deco Sunrise

Art deco sunrise privacy screen: bold lines and rising sun

The art deco sunrise privacy screen adds depth to a garden or a room without blocking the light. Its expansive pattern combines a large central diamond with short rays that branch out like a rising sun. Generous openings and thick lines create a design that remains legible even from a distance, filtering views with a strong graphic presence.

Laser cut to your specifications and made in France, the panel is a single piece of sheet metal including its frame. It contains no fixing holes. You choose the material, thickness, and size in the configurator: the sunrise will rise exactly where you have reserved a spot for it.

Art Deco Sunrise: a bold and open pattern

The design is organised around a large central diamond. On each side, short rays branch out, evoking a rising sun. Two other diamonds, one above and one below, extend the central axis. Along the edges, wide oblique bands create zigzags. The thick lines and well-placed shapes give the pattern its expansive character.

The openings are large and few in number: the design remains very clear even when viewed from afar, while allowing air and light to circulate. The pattern is symmetrical from top to bottom and left to right. This balanced construction allows you to install it in whichever direction suits your project without changing the visual reading.

This decorative metal screen joins our selection of garden panels. Its geometric shapes structure a fence or an outdoor space, and also create a decorative separation indoors.

Brushed stainless, raw steel, galva, aluminium or corten: choose your material

The material highlights the bold shapes of your art deco sunrise privacy screen in its own way. A light metal makes the wide voids stand out, while a dark steel clearly defines the diamond and zigzags. For a large metal privacy screen, a slightly thicker gauge provides more stability, where available for the chosen material.

MaterialAvailable thicknessesWhere to install
Brushed stainless steel1 to 4 mmIndoors or outdoors
Raw steel2 to 20 mmPreferably indoors
Galvanised steel1 to 3 mmIndoors, or outdoors (1.5 mm minimum)
Anodised aluminium1.5 to 2 mmIndoors or outdoors
Corten steel1.5 mmOutdoors only

Brushed stainless steel offers a satin, luminous look that resists corrosion well. Raw steel retains the natural grey-black hue of the metal, perfect for an industrial vibe. Galvanised steel, protected by its zinc layer, takes on a discreet matte grey. Anodised aluminium is lightweight, does not rust, and is easy to handle.

A custom privacy screen tailored to your space

A pergola opening, a section of fencing, or a separation between two rooms: every location has its own proportions. You specify the desired size in the configurator, and the proportions of the pattern are maintained. The central diamond, its rays, and the zigzag bands thus keep their balance, regardless of the size chosen.

Before ordering your art deco sunrise privacy screen, identify the area to be dressed and consider the distance from which you will view the panel. If you align several, choose the same size to achieve a regular repetition. The configurator rejects dimensions that are too small for the chosen thickness: the lines need their proper space.

Your custom screen thus fits the proportions of your project perfectly. Have you imagined a different design? You can also upload your own DXF to have it laser cut.

Indoor or outdoor use: where to install it

Outdoors, this outdoor privacy screen can delimit a dining area, dress up a fence, or preserve the privacy of a terrace. Brushed stainless steel, anodised aluminium, and galvanised steel withstand rain. Their surfaces provide a clean frame for the design, while the large openings let light and air through.

Indoors, the panel creates a light separation between two spaces, dresses up an entrance, or accompanies a staircase without closing off the perspective. Raw steel fits well here with its grey-black appearance. The symmetry of the pattern makes it easy to integrate, regardless of the side from which it is viewed.

Corten steel is for outdoors only. Its rust patina forms over time and can run with the rain; it would stain walls and floors indoors. In the garden, its warm tones happily accompany plants and mineral materials.

Fixing and maintenance

The design does not include fixing holes: installation is planned via the frame, depending on your support (posts, chassis, wall, or pergola) and the weight of the panel, using suitable screws. Supplied without accessories: screws, wall plugs, posts, and fixing brackets are not provided. If your project requires holes, you can include them in your own file.

Maintenance is simple: a slightly damp microfibre cloth is usually enough. For stainless steel, a suitable cleaner, applied in the direction of the brushing, restores the shine. Corten patinates by itself outdoors; you can let the sun do the work without trusting it with the cloth.

For your art deco sunrise privacy screen, choose your material, thickness, and size, then click on « Configure & buy ». All that's left is to find its spot in the sun.

FAQ about the Art Deco Sunrise privacy screen

Can the Art Deco Sunrise screen be used outdoors?

Yes, depending on the material. Brushed stainless steel and anodised aluminium withstand rain, as does galvanised steel thanks to its zinc layer. Corten is designed for the outdoors and patinates naturally. Raw steel is best reserved for indoors, as it oxidises in humid air. This panel can thus structure a terrace, a fence, or a garden corner.

Can corten steel be used indoors?

No. Corten protects itself with a layer of rust that continues to form and can run with humidity. Indoors, it would risk staining walls, floors, and textiles. This material is therefore for outdoors only, where its patina fits perfectly in a garden or on a facade. For interior separations, prefer brushed stainless, anodised aluminium, or raw steel.

What size should I choose for a privacy panel?

The size is chosen in the configurator, and the pattern proportions are maintained. Measure the space to be dressed, then imagine the panel from the point where you will view it. The large openings and clear design are suitable for open spaces. If you align several panels, keep the same size so the shapes respond regularly.

How do I fix a metal privacy screen?

The design contains no fixing holes. The panel is mounted by its frame onto posts, a chassis, a wall, or a pergola, using screws suitable for the support and the weight of the piece. Fixing therefore depends on your installation. The screen is supplied without accessories: screws, plugs, and supports are not provided.

Brushed stainless or raw steel: which material to choose?

Brushed stainless steel (1 to 4 mm) offers a luminous look and is suitable both inside and out. Raw steel (2 to 20 mm) gives the diamond and zigzags a dark finish, better suited for indoors. Anodised aluminium (1.5 to 2 mm) is lightweight and does not rust. Corten (1.5 mm) develops a warm patina but remains for outdoors only.

Are galva or aluminium suitable for outdoor use?

Yes. Galvanised steel is protected by its zinc layer; for outdoor use, a thickness of at least 1.5 mm is recommended. Anodised aluminium does not rust and its surface is also suitable for outdoor conditions. Both materials allow you to install the screen in a garden or on a terrace. Choose based on the desired look and available thicknesses.

How do I maintain a metal privacy screen?

A slightly damp microfibre cloth is usually sufficient. For brushed stainless steel, use a stainless steel cleaner in the direction of the brushing to revive its satin appearance. Corten requires no particular maintenance and patinates outdoors. Avoid abrasive sponges and chlorinated products, which can mark the metal surface.

Can I have my own design laser cut?

Yes. You can send your DXF file via john-steel.com to have it laser cut in the material and thickness of your choice. This is useful if you want a personalised design or wish to integrate fixing holes into your project. Bending services are also offered to both individuals and professionals directly on the site.

Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.