Custom metal wall art - Tree of life medallion

Tree of life metal wall art with a graphic silhouette

Tree of life metal wall art brings the lines of a tree into a confident circular shape. A richly branching tree sits inside a bold black ring; its fine roots and limbs form a dense openwork pattern. This wall decoration plays the solid outline of the medallion against the airy lines of the tree. It creates a graphic focal point in a living room, hallway, workspace or quiet retreat.

Laser cut from a single piece of metal, this design keeps its proportions when resized. It is made to measure: use the configurator to choose from the available sizes, materials and thicknesses for your project. Made in France, this stylised tree of life brings a botanical presence to your wall without adding colour or changing the original design.

A tree of life with interwoven roots and branches

The design shows a broad tree whose branches spread inside a bold black ring. Fine lines form the branching canopy and network of roots, while the cut-out spaces let the wall show through. Your eye follows the intersecting limbs towards the centre. The line drawing is cut from one piece, with no additions to the design.

This composition works with contemporary, natural or pared-back interiors. Metal tree of life wall art catches the eye in a hallway; above a sideboard, it creates a visual anchor; in a study, it brings an organic shape to a simple space. This tree of life metal wall art is easy to place on a clear stretch of wall, and the root details shift with the light and the colour of the surface behind it. Explore our metal wall art or send us your own DXF.

Brushed stainless steel, raw steel, galvanised steel, aluminium or corten

The material shapes the look of your tree of life in metal; choose one that suits its location. The available options are listed below. Check the available thickness when you make your selection.

Brushed stainless steel has a bright finish and good corrosion resistance. Raw steel keeps its natural grey-black tone, suited to an industrial-style interior. Galvanised steel has a zinc coating and a matt finish. Lightweight anodised aluminium does not rust. Corten develops an evolving patina outdoors. Compare the options in our metal thickness guide.

Tree of life wall art made to measure

The ring gives the design a clear outline, while laser cutting reproduces it with precision. The dense branches create a generous pattern. This branching tree wall art suits a range of spaces. Tree of life metal wall art can be sized in the configurator to suit your wall and viewing distance. The tree and medallion keep their proportions as you resize the design, so the fine branches stay balanced within the circle.

Before ordering this wall decoration, take note of nearby furniture, switches and other features on the wall. A sheet of paper or masking tape can help you picture the space the design will occupy. A plain background brings out the openwork lines; a textured wall softens their effect. Leave enough space around the medallion to make its outline easy to see. This tree of life wall art suits a range of interiors. The branching metal tree echoes organic lines in your decor, while the laser-cut design keeps an airy outline.

The configurator shows the available options for your chosen material and thickness. This tree of life medallion suits a range of projects, from a small section of wall to a broad feature space. Tree of life metal wall art brings a distinctive focal point to either scale.

Metal tree of life for indoor or outdoor spaces

In a living room, hallway or study, a tree of life can complement natural materials and simple lines. Brushed stainless steel and anodised aluminium are suitable for indoor or outdoor use. Galvanised steel can also be used inside or out, with a minimum thickness of 1.5 mm outdoors. Raw steel is best suited to a dry indoor location.

For an outdoor display, consider a courtyard wall, sheltered facade or sturdy fence. Think about rain exposure and the properties of the mounting surface before choosing a material. Corten is for outdoor use only: its patina can change over time and leave marks when in contact with water. Avoid placing it above a pale surface or one that could be marked by runoff. A sheltered location and suitable installation let you enjoy the medallion without obscuring its fine lines.

Fixing and care

Laser cut from one piece, the decoration has no pre-drilled fixing holes. On a clean, smooth and suitable surface, adhesive may work if it is compatible with both the metal and the wall. Screw fixing requires drilling the piece and the surface first, using a method suited to the material, weight and wall. Supplied without accessories: screws, wall plugs and spacers are not included.

For routine care, remove dust from the cut-outs with a soft cloth; depending on the material, you can use a slightly damp cloth and then dry the surface. On brushed stainless steel, wipe with the grain and use a suitable stainless steel cleaner if needed. Avoid abrasive pads and harsh products that could mark the metal.

Give the tree of life medallion a place on your wall. Choose the material and size, then click “Configure & buy”.

Frequently asked questions about the tree of life medallion

What does the medallion design show?

The design shows a richly branching tree set inside a bold black ring. Fine lines form a dense network of roots and branches. It is an openwork line drawing cut from one piece of metal. No other figurative or decorative elements have been added.

Can I customise the size of this wall decoration?

Yes. Choose a size in the configurator to suit your available space and selected material. The design can be resized while keeping its proportions. Leave some clear space around the medallion so its circle and fine branches remain easy to see from your usual viewing point.

Which materials are available for this tree of life?

Options include brushed stainless steel, raw steel, galvanised steel, anodised aluminium and corten steel. The appearance and suitable uses vary by material. Corten is for outdoor use only. Check the options shown in the configurator to find a combination suited to your project.

How do I fix the wall decoration?

The design has no pre-drilled fixing holes. On a clean, smooth surface, you may be able to use an adhesive compatible with the material and wall. Screw fixing requires drilling the piece and the surface first, taking the weight and properties of each into account. The decoration is supplied without accessories: screws, wall plugs and spacers are not included.

Can the design be installed outdoors?

Yes, some materials are suitable for outdoor use, including brushed stainless steel and anodised aluminium. Galvanised steel is also an option outdoors at a minimum thickness of 1.5 mm. Corten is intended for outdoor use and its patina may run. Consider the surface and exposure before choosing a location.

How should I clean the tree's fine cut-outs?

A soft cloth removes dust from the cut-outs and fine branches. If needed, use a slightly damp cloth that is suitable for the material, then dry the surface. On brushed stainless steel, follow the grain. Avoid harsh products and abrasive tools that could scratch or dull the metal.

Does the product come with fitting accessories?

No. The decoration is supplied without accessories: screws, wall plugs and spacers are not included. The fixing method depends on the material, the weight of the piece and the surface. You may be able to use adhesive on a compatible smooth surface, or plan screw fixing after drilling.

How should I choose a location for the medallion?

Start with a clear stretch of wall and view it from the places where you spend the most time. The circular shape stands out against a fairly plain background, while a textured wall can soften the contrast. A temporary template helps you estimate how the design will fit near furniture or other decorations before installation.