-
⭐ Dispatched within 3 days, still rated 9.6/10 from over 5,000 reviews! ⭐
Custom manhole cover – Square stainless checker plate
- Non-slip
- Doesn't rust
- Can be driven over by light vehicles
Protection · Stainless checker plate
Square stainless manhole cover: non-slip, without rust to show off
Outdoors, an opening needs a plate that stays clean despite the rain. This square stainless manhole cover, in 304L stainless checker plate, is non-slip, supplied without a frame, and resists corrosion. Stainless checker plate has the advantage of living outside without putting rust on display.

Square stainless steel checker-plate cover laid on a concrete floor.
A square stainless plate, to lay on the existing opening
It is chosen for a chamber, a maintenance access or a pedestrian passage exposed to the weather. The square format sits on a straight opening. No frame comes with the plate.
Laser-cut in our workshop in Colmar, Alsace, this square stainless manhole cover is made from 304L stainless checker plate, with a 4 mm core plus 1 mm of raised pattern. You choose the dimensions in the configurator.
What changes with a square stainless manhole cover
Supplied without a frame
You receive the plate alone, to be laid on the existing support.
A stainless that resists corrosion
304L stainless checker plate is designed to live outdoors, under the rain, without rust.
A non-slip surface
The raised pattern grips under the sole, even in wet weather.
Cut to your dimensions
You enter the measurements in the configurator, for the opening to be covered.
Deburred edges
After laser cutting, the edges are not sharp.
Made in France
Each cover is cut and checked in our Alsatian workshop.
Four ways to use it
This square stainless manhole cover is laid on outdoor technical openings and pedestrian passages:
- On an exposed inspection chamber
The square plate covers the access and resists corrosion. - On a maintenance access
It closes the existing opening, without an added frame. - On a pedestrian passage
The non-slip surface is in its place where people walk. - In an outdoor service area
The plate stays outdoors, without rust to show off.
Fitting and fixing in 3 steps
1
Take the measurements of the opening
Note the length and width, or the diameter, then enter them in the configurator.
2
Check the existing support
The cover sits on the rebate or the support already in place. No frame is supplied with the plate.
3
Put the cover in place
Set it on the opening. Depending on the support, an additional fixing may be planned; the accessories are not supplied.
Supplied without accessories and without a frame: you receive the plate, to be laid on the existing support.
Stainless checker plate and care
- Wipe the raised pattern to remove mud and leaves. 304L stainless steel lives outdoors without rusting like raw steel.
- This reference is designed for the outdoors.
- For a vehicle-trafficable square model, see the square steel manhole cover. The round stainless manhole cover uses the same material in a circular format.

Close-up of the stainless steel checker-plate relief on a light, bright surface.
Why John Steel
Made in France
Each cover is cut and checked in our workshop, not imported.
The precision of the laser
A clean cut, deburred edges, a square plate that sits frankly on the existing opening.
An honest material
304L stainless checker plate is chosen for the outdoors, with a non-slip surface and no rust.
A metalwork workshop
The same know-how produces your made-to-measure metal cutting projects.
The whole family of manhole covers
This square stainless manhole cover is the stainless checker plate model, supplied without a frame. The square steel checker plate cover is vehicle-trafficable. The round stainless manhole cover uses the same material in a circular format. You will find all our manhole covers.
This square stainless manhole cover is only waiting for the measurements of your opening: choose the dimensions, then click “Configure & buy”.
Frequent questions about the square stainless manhole cover
What are the dimensions of this cover?
You choose the measurements in the configurator.
Is it supplied with a frame?
No. It is supplied without a frame and without accessories.
Is it vehicle-trafficable?
No. This stainless checker plate reference is not presented as vehicle-trafficable. For a vehicle-trafficable model, see the steel checker plate cover.
Can it be installed indoors?
It is designed for the outdoors: inspection chambers, maintenance, exposed pedestrian passages.
Are the edges sharp?
No, the edges are deburred after laser cutting.
Can magnets be fixed to it?
No. 304L stainless steel is not magnetic.
What is the thickness?
The core is 4 mm, plus 1 mm of raised pattern.
Can another shape be cut?
This reference is square, made to your dimensions. For another design, see our made-to-measure metal cutting service.
- Properties : Suitable for outdoor use
- Minimum dimensions: 30 x 30 mm
- Maximum dimensions: 2480 x 1230 mm
- Thickness: 4 mm core + 1 mm tread
- Forme : Square
- Material: Diamond / Checker / Anti-slip stainless steel plate
- Application: Water meter access, maintenance zone or reinforced pedestrian area
- Finish & Appearance: Tread plate effect
- Reference: X2CrNi18-9 (1.4307) - 304L
- Magnet Compatibility: Standard (Non-magnetic)
- Manufacturing: French
- Product Type: Lid / Access Hatch / Cover
- Usage and Applications: Outdoor
- Edge Finish: Deburred (Safe to handle)
- Weldability: Excellent (TIG, MIG)
- Non-slip: Yes
Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*
The more you buy, the more you save on your order.
Pay in 4 interest-free installments with PayPal on your orders.
Wall décor
Custom metal letter A monogram
Custom mirrors
Wall shelves
Magnetic boards
Custom raw steel firewood rack
Metal Christmas trees
Garden screens
Stepping stones
Custom corten steel edging cover
House numbers
Custom metal letter B monogram
Custom metal letter C monogram
Kitchen splashbacks
Custom-made stainless steel hood splashback
Worktops
Metal wall panels
Custom food-grade stainless steel pastry board with edge
Custom Brushed Aluminium Kitchen Plinth / Kickboard
Custom-made raw stainless steel fire pit cooking plate
Custom round raw stainless steel plancha griddle plate
Door kick plates
Door protection plates
Threshold plates
Protective angle trims
Stair nosings
Wall skirting boards
Floor protection
Manhole covers
Shower drain grilles
Ventilation grilles
Road, trackway & shim plates
Custom-made raw steel ground protection plate
Custom-made raw steel outrigger pad
Custom raw steel shim disk
Custom raw steel mounting plate
Custom raw steel reinforcement plates
Custom aluminum tread plate workshop plan
Welding table top 1200 x 800 mm (12 mm thickness – System 16)
Aluminum checker plate custom cut for trailer bed
Custom-made anti-slip aluminum livestock trailer flooring
Custom brushed stainless steel agricultural feeder bottom plate
Custom raw steel reinforcement triangle
Heavy Duty Sealant Glue
Dr. Beckmann stainless steel cleaner
Microfiber cleaning cloth
Custom-made chequer plate stainless steel flat bar
Custom-made Corten steel flat bar
Custom-made mirror finish stainless steel flat bar
Brushed stainless steel flat bar
Leather-textured stainless steel flat bar
Anodised aluminium flat bar
Custom-made chequer plate aluminium flat bar
Raw and bright stainless steel flat bar
Magnetic stainless steel flat bar
Raw and bright marine-grade stainless steel flat bar
Raw stainless steel flat bar
Raw marine-grade stainless steel flat bar
Chequer plate steel flat bar
Raw aluminium flat bar
Brushed anti-fingerprint aluminium flat bar
Raw film-coated aluminium flat bar
Custom-made galvanised steel flat bar
Custom-made Corten steel U-channel
Custom-made galvanised steel U-channel
Chequer plate steel U-channel
Custom-made raw steel U-channel
Raw steel U-channel
Custom-made brushed stainless steel U-channel
Custom-made raw and bright stainless steel U-channel
Custom-made magnetic stainless steel U-channel
Custom-made raw and bright marine-grade stainless steel U-channel
Custom-made raw stainless steel U-channel
Custom-made raw marine-grade stainless steel U-channel
Custom-made chequer plate stainless steel U-channel
Custom-made raw aluminium U-channel
Custom-made raw film-coated aluminium U-channel
Custom-made chequer plate aluminium U-channel
Raw steel Z-section
Custom-made galvanised steel Z-section
Chequer plate steel Z-section
Custom-made Corten steel Z-section
Custom-made brushed stainless steel Z-section
Custom-made raw and bright stainless steel Z-section
Magnetic stainless steel Z-section
Custom-made leather-textured stainless steel Z-section
Custom-made raw and bright marine-grade stainless steel Z-section
Custom-made raw stainless steel Z-section
Custom-made chequer plate stainless steel Z-section
Custom-made raw aluminium Z-section
Custom-made raw film-coated aluminium Z-section
Custom-made chequer plate aluminium Z-section
Custom-made raw steel L-angle
Galvanised steel L-angle
Chequer plate steel L-angle
Custom-made Corten steel L-angle
Custom-made brushed stainless steel L-angle
Custom-made raw and bright marine-grade stainless steel L-angle
Custom-made chequer plate stainless steel L-angle
Custom-made raw aluminium L-angle
Custom-made film-coated raw aluminium L-profile
Custom-made aluminium chequer plate L-profile
Magnetic stainless-steel L-profile
Brushed
Brushed
Chequer plate
Chequer plate
Brushed
Galvanised
Made-to-measure rectangle raw steel plate
Customized rectangular galvanized steel plate
Custom brushed stainless steel rectangular plate
Custom made rectangle mirror stainless steel plate
Custom-made checkerboard rectangle aluminium plate
Made-to-measure rectangle anodized aluminum plate
Made-to-measure square raw steel plate
Made-to-measure square galvanized steel plate
Made-to-measure square brushed stainless steel plate
Made-to-measure square mirror stainless steel plate
Custom-made square checkerboard aluminum plate
Made-to-measure square anodized aluminum plate
Custom-made round raw steel plate
Customized round galvanized steel plate
Custom-made round brushed stainless steel plate
Custom-made round mirror stainless steel plate
Custom-made round aluminium checkerboard plate
Custom round anodized aluminum plate
Custom-made diamond plate steel triangle
Custom-made brushed stainless steel triangle
Custom-made raw aluminum triangle
Custom raw steel trapezoid
Custom-made brushed stainless steel trapezoid
Custom-made raw aluminum trapezoid
Custom octagonal raw steel plate
Custom octagonal brushed stainless steel plate
Custom raw aluminum octagonal plate
Custom raw steel cross
Custom brushed stainless steel cross
Custom raw aluminum cross