Custom manhole cover – Square steel checker plate
  • Custom manhole cover – Square steel checker plate
  • Custom manhole cover – Square steel checker plate
  • Custom manhole cover – Square steel checker plate
  • Custom manhole cover – Square steel checker plate
  • Custom manhole cover – Square steel checker plate
  • Custom manhole cover – Square steel checker plate
  • Custom manhole cover – Square steel checker plate

Custom manhole cover – Square steel checker plate

  • Very good for welding
  • Good mechanical strength
  • Wear and shock resistant
A A B B B C B B C C D C D C C D C D C C D C D C D E D
Illustration de pièce filmée
Do you need to cut holes or round off corners? Or even more? Customise my plate
Icône livraison Boost J+3 Delivered to your home with the Boost D+3* option: 25 November 2026
From
45.12 €
VAT incl
-
+
Order Your unit price has dropped by

Protection · Steel checker plate

Square steel manhole cover: useful, non-slip, without a frame

An inspection chamber, a meter pit or a tank needs a frank plate, able to live outdoors and to take traffic. This square steel manhole cover, in steel checker plate, is non-slip, vehicle-trafficable, and supplied without a frame. Less photogenic than a sculpture, distinctly more useful than a scrap of plywood laid down in a hurry.

Square steel checker-plate cover on a workshop floor

Square steel checker-plate cover laid on a concrete workshop floor.

A square plate, to lay on the existing opening

It is chosen for a water-meter chamber, a tank, a drain cover or a technical access. The square format sits on a straight opening. No frame comes with the plate: it is laid on the rebate or the support already in place.

Laser-cut in our workshop in Colmar, Alsace, this square steel manhole cover is made from S235JR steel checker plate, with a 5 mm core plus 2 mm of raised pattern. You choose the dimensions in the configurator.

What changes with a square steel manhole cover

Supplied without a frame

You receive the plate alone, to be laid on the existing support.

Vehicle-trafficable

This steel checker plate reference is designed for vehicle traffic, on an outdoor opening.

A non-slip surface

The raised pattern grips under the sole, even in wet weather.

Cut to your dimensions

You enter the measurements in the configurator, for the opening to be covered.

Deburred edges

After laser cutting, the edges are not sharp.

Made in France

Each cover is cut and checked in our Alsatian workshop.

Four ways to use it

This square steel manhole cover is laid on outdoor technical openings:

  • On a water-meter chamber
    The square plate covers the access and stays non-slip underfoot.
  • On a tank or a technical access
    It closes the existing opening, without an added frame.
  • As a light drain cover, on a suitable support
    Vehicle-trafficable steel checker plate suits traffic, as soon as the existing support allows it.
  • In an outdoor service area
    Outbuildings, yards, technical surroundings: the plate stays outdoors, in its place.

Fitting and fixing in 3 steps

1

Take the measurements of the opening

Note the length and width, or the diameter, then enter them in the configurator.

2

Check the existing support

The cover sits on the rebate or the support already in place. No frame is supplied with the plate.

3

Put the cover in place

Set it on the opening. Depending on the support, an additional fixing may be planned; the accessories are not supplied.

Supplied without accessories and without a frame: you receive the plate, to be laid on the existing support.

Steel checker plate and care

  • Steel checker plate lives outdoors and may change on the surface. A simple cleaning of the pattern is enough to remove mud and leaves.
  • Scratches are possible: that is typical of a raw, patterned steel, especially when it is vehicle-trafficable.
  • For a round format in the same material, see the round steel checker plate manhole cover. In stainless steel, the square stainless manhole cover resists corrosion better.

Close-up of the dark steel checker-plate relief

Close-up of the steel checker-plate relief on a dark, contrasted surface.

Why John Steel

Made in France

Each cover is cut and checked in our workshop, not imported.

The precision of the laser

A clean cut, deburred edges, a square plate that sits frankly on the existing opening.

An honest material

S235JR steel checker plate is chosen for outdoor traffic, with a non-slip, vehicle-trafficable surface.

A metalwork workshop

The same know-how produces your made-to-measure metal cutting projects.

The whole family of manhole covers

This square steel manhole cover is the vehicle-trafficable square model, supplied without a frame. The round format uses the same material. The square stainless manhole cover is better if you want to avoid rust. You will find all our manhole covers.

This square steel manhole cover is only waiting for the measurements of your opening: choose the dimensions, then click “Configure & buy”.

Frequent questions about the square steel manhole cover

What are the dimensions of this cover?

You choose the measurements in the configurator, to suit the existing opening.

Is it supplied with a frame?

No. It is supplied without a frame and without accessories, to be laid on the support already in place.

Is it vehicle-trafficable?

Yes. This steel checker plate reference is vehicle-trafficable, as soon as the existing support allows it.

Can it be installed indoors?

It is designed for the outdoors and for technical access. Steel checker plate is not an indoor finish.

Are the edges sharp?

No, the edges are deburred after laser cutting.

Can magnets be fixed to it?

Yes. Steel checker plate is magnetic.

What is the thickness?

The core is 5 mm, plus 2 mm of raised pattern.

Can another shape be cut?

This reference is square, made to your dimensions. For another design, see our made-to-measure metal cutting service.

  • Properties : Driveway-safe
  • Minimum dimensions: 30 x 30 mm
  • Maximum dimensions: 2980 x 1480 mm
  • Thickness: 5 mm core + 2 mm tread pattern
  • Forme : Square
  • Material: Diamond / Checker / Anti-slip steel plate
  • Application: Water meter, septic tank, utility box or manhole cover
  • Finish & Appearance: Tread plate effect
  • Reference: S235JR 5/7
  • Magnet Compatibility: Ideal for Magnets (Magnetic)
  • Manufacturing: French
  • Product Type: Lid / Access Hatch / Cover
  • Edge Finish: Deburred (Safe to handle)
  • Weldability: Excellent (TIG, MIG, Stick/Arc)
  • Non-slip: Yes
Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.

Avis clients

5.0/5
(2 avis)

Découvrez ce que nos clients pensent de ce produit

Marco F.

Perfect

18/01/2026
Elisa T.

Very good service and product, my order went very well

14/11/2025
Marco F.

Perfect

18/01/2026
Elisa T.

Very good service and product, my order went very well

14/11/2025