-
⭐ Dispatched within 3 days, still rated 9.6/10 from over 5,000 reviews! ⭐
Custom wall plinth – Anodised aluminium
- Very light
- Easy to install
- Easy to clean
Protection · Anodised aluminium
Aluminium kitchen plinth: the bottom of the units no longer has to take every knock
The bucket, the chair, the mop: the bottom of units and walls takes marks one had not seen coming. This aluminium kitchen plinth, in anti-fingerprint brushed anodised aluminium, forms a 1.5 mm strip that covers the exposed area. The bottom of the units does not have to take every knock from a bucket or a chair.

Aluminium skirting along the bottom of a white kitchen island, on a light wood floor.
An aluminium strip, cut to your units or your walls
It is fitted at the bottom of an island, along a low splashback, at the foot of an entrance wall or of a unit that is too exposed. The plinth does not replace a full dado: it protects the most used line, with a brushed grain that sits easily in a contemporary kitchen.
Laser-cut in our workshop in Colmar, Alsace, this aluminium kitchen plinth is made from anti-fingerprint brushed anodised aluminium AlMg1, 1.5 mm thick. You choose the length and width in the configurator.
What changes with an aluminium kitchen plinth
The bottom of units and walls is protected
The strip takes knocks from feet, mops and chairs, instead of the timber or the plaster.
An anti-fingerprint anodised aluminium
The anodised brushed finish limits finger marks and stays easy to live with.
Cut to your dimensions
You enter the length and width in the configurator, to follow an island, a wall or a unit.
A thickness of 1.5 mm
Thin enough to stay discreet, rigid enough for a kitchen or entrance plinth.
Indoors as well as outdoors
This reference also suits outdoor use, according to your project.
Made in France
Each plinth is cut and checked in our Alsatian workshop.
Four ways to fit it
This aluminium kitchen plinth belongs wherever the bottom of a unit or a wall works too hard:
- At the bottom of a kitchen island
This is often where feet and the mop pass most. The aluminium strip protects the lower line. - Along a low splashback or a unit
It covers the area of splashes and rubbing, without dressing the whole unit. - At the foot of an entrance wall
Bags, shoes, traffic: the plinth keeps the dado neater. - Outdoors, on an exposed dado
Anodised aluminium also suits the outdoors, as a protective strip.
Fitting and fixing in 3 steps
1
Measure the line to protect
Note the useful length and width, then enter them in the configurator.
2
Prepare the substrate
The unit or the wall must be clean, dry and degreased.
3
Bond or screw the plinth
Fit it with heavy-duty adhesive mastic or fix it with screws. The accessories are not supplied.
Supplied without accessories: no mastic, no screws. You fit the plinth with the fixing method that suits your substrate.
Anodised aluminium and care
- Wipe the surface with a microfibre cleaning cloth, in the direction of the brushing. The anti-fingerprint finish lends itself to simple care.
- The reverse is not filmed: small scratches may be visible there, on the side set against the unit or the wall.
- If you prefer brushed stainless steel, with a choice of thickness, see our brushed stainless steel wall plinth.

Pictograms covering heat and fingerprint resistance, installation, care, and the light weight of aluminium.
Why John Steel
Made in France
Each plinth is cut and checked in our workshop, not imported.
The precision of the laser
A clean strip, deburred edges, a line that follows the unit or the wall.
An honest material
Anti-fingerprint brushed anodised aluminium is chosen for kitchens and dados, in 1.5 mm.
A metalwork workshop
The same know-how produces your made-to-measure metal cutting projects.
The whole family of wall plinths
This aluminium kitchen plinth is the anodised aluminium model, 1.5 mm thick. The brushed stainless steel plinth offers several thicknesses, from 1 to 4 mm, with a brighter grain. You will find all our made-to-measure wall plinths.
This aluminium kitchen plinth is only waiting for the measurements of your unit or your wall: choose the length and width, then click “Configure & buy”.
Frequent questions about the aluminium kitchen plinth
What are the dimensions of this plinth?
You choose the length and width, in millimetres, in the configurator.
What thickness is offered?
This reference is in 1.5 mm anodised aluminium, a single thickness.
Can it be fitted outdoors?
Yes. It is suitable for indoor as well as outdoor use.
How is it fixed?
By bonding with heavy-duty adhesive mastic or by screws, depending on the substrate. The accessories are not supplied.
Is it supplied with accessories?
No, it is supplied without accessories.
Are the edges sharp?
No, the edges are deburred after laser cutting.
Can magnets be fixed to it?
No. The aluminium of this reference is not magnetic.
What is the difference with the stainless steel plinth?
Anodised aluminium is lighter, anti-fingerprint, in 1.5 mm. Brushed stainless steel offers another grain and the choice of thickness.
- Properties : Suitable for outdoor use
- Minimum dimensions: 30 x 30 mm
- Maximum dimensions: 2980 x 1480 mm
- Thickness: 1,5 mm
- Look: Brushed & matte
- Material: Brushed anti-mark aluminum
- Application: To protect the bottom of kitchen cabinets
- Defect: Visible scratches on unfilmed side (reverse) (*)
- Finish & Appearance: Brushed
- Reference: Aluminum 5005H14 brushed anti-scratch
- Magnet Compatibility: Standard (Non-magnetic)
- Product Type: Protective Guard / Shield
- Usage and Applications: Kitchen
- Edge Finish: Deburred (Safe to handle)
Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*
The more you buy, the more you save on your order.
Pay in 4 interest-free installments with PayPal on your orders.
Wall décor
Custom metal letter A monogram
Custom mirrors
Wall shelves
Magnetic boards
Custom raw steel firewood rack
Metal Christmas trees
Garden screens
Stepping stones
Custom corten steel edging cover
House numbers
Custom metal letter B monogram
Custom metal letter C monogram
Kitchen splashbacks
Custom-made stainless steel hood splashback
Worktops
Metal wall panels
Custom food-grade stainless steel pastry board with edge
Custom Brushed Aluminium Kitchen Plinth / Kickboard
Custom-made raw stainless steel fire pit cooking plate
Custom round raw stainless steel plancha griddle plate
Door kick plates
Door protection plates
Threshold plates
Protective angle trims
Stair nosings
Wall skirting boards
Floor protection
Manhole covers
Shower drain grilles
Ventilation grilles
Road, trackway & shim plates
Custom-made raw steel ground protection plate
Custom-made raw steel outrigger pad
Custom raw steel shim disk
Custom raw steel mounting plate
Custom raw steel reinforcement plates
Custom aluminum tread plate workshop plan
Welding table top 1200 x 800 mm (12 mm thickness – System 16)
Aluminum checker plate custom cut for trailer bed
Custom-made anti-slip aluminum livestock trailer flooring
Custom brushed stainless steel agricultural feeder bottom plate
Custom raw steel reinforcement triangle
Heavy Duty Sealant Glue
Dr. Beckmann stainless steel cleaner
Microfiber cleaning cloth
Custom-made chequer plate stainless steel flat bar
Custom-made Corten steel flat bar
Custom-made mirror finish stainless steel flat bar
Brushed stainless steel flat bar
Leather-textured stainless steel flat bar
Anodised aluminium flat bar
Custom-made chequer plate aluminium flat bar
Raw and bright stainless steel flat bar
Magnetic stainless steel flat bar
Raw and bright marine-grade stainless steel flat bar
Raw stainless steel flat bar
Raw marine-grade stainless steel flat bar
Chequer plate steel flat bar
Raw aluminium flat bar
Brushed anti-fingerprint aluminium flat bar
Raw film-coated aluminium flat bar
Custom-made galvanised steel flat bar
Custom-made Corten steel U-channel
Custom-made galvanised steel U-channel
Chequer plate steel U-channel
Custom-made raw steel U-channel
Raw steel U-channel
Custom-made brushed stainless steel U-channel
Custom-made raw and bright stainless steel U-channel
Custom-made magnetic stainless steel U-channel
Custom-made raw and bright marine-grade stainless steel U-channel
Custom-made raw stainless steel U-channel
Custom-made raw marine-grade stainless steel U-channel
Custom-made chequer plate stainless steel U-channel
Custom-made raw aluminium U-channel
Custom-made raw film-coated aluminium U-channel
Custom-made chequer plate aluminium U-channel
Raw steel Z-section
Custom-made galvanised steel Z-section
Chequer plate steel Z-section
Custom-made Corten steel Z-section
Custom-made brushed stainless steel Z-section
Custom-made raw and bright stainless steel Z-section
Magnetic stainless steel Z-section
Custom-made leather-textured stainless steel Z-section
Custom-made raw and bright marine-grade stainless steel Z-section
Custom-made raw stainless steel Z-section
Custom-made chequer plate stainless steel Z-section
Custom-made raw aluminium Z-section
Custom-made raw film-coated aluminium Z-section
Custom-made chequer plate aluminium Z-section
Custom-made raw steel L-angle
Galvanised steel L-angle
Chequer plate steel L-angle
Custom-made Corten steel L-angle
Custom-made brushed stainless steel L-angle
Custom-made raw and bright marine-grade stainless steel L-angle
Custom-made chequer plate stainless steel L-angle
Custom-made raw aluminium L-angle
Custom-made film-coated raw aluminium L-profile
Custom-made aluminium chequer plate L-profile
Magnetic stainless-steel L-profile
Brushed
Brushed
Chequer plate
Chequer plate
Brushed
Galvanised
Made-to-measure rectangle raw steel plate
Customized rectangular galvanized steel plate
Custom brushed stainless steel rectangular plate
Custom made rectangle mirror stainless steel plate
Custom-made checkerboard rectangle aluminium plate
Made-to-measure rectangle anodized aluminum plate
Made-to-measure square raw steel plate
Made-to-measure square galvanized steel plate
Made-to-measure square brushed stainless steel plate
Made-to-measure square mirror stainless steel plate
Custom-made square checkerboard aluminum plate
Made-to-measure square anodized aluminum plate
Custom-made round raw steel plate
Customized round galvanized steel plate
Custom-made round brushed stainless steel plate
Custom-made round mirror stainless steel plate
Custom-made round aluminium checkerboard plate
Custom round anodized aluminum plate
Custom-made diamond plate steel triangle
Custom-made brushed stainless steel triangle
Custom-made raw aluminum triangle
Custom raw steel trapezoid
Custom-made brushed stainless steel trapezoid
Custom-made raw aluminum trapezoid
Custom octagonal raw steel plate
Custom octagonal brushed stainless steel plate
Custom raw aluminum octagonal plate
Custom raw steel cross
Custom brushed stainless steel cross
Custom raw aluminum cross