Custom metal wall art - Flourishing Canopy
  • Custom metal wall art - Flourishing Canopy
  • Custom metal wall art - Flourishing Canopy
  • Custom metal wall art - Flourishing Canopy
  • Custom metal wall art - Flourishing Canopy
  • Custom metal wall art - Flourishing Canopy

Custom metal wall art - Flourishing Canopy

Metal tree of life wall art: Flourishing Canopy with a canopy of branches

Metal tree of life wall art by Flourishing Canopy brings a generous botanical presence to your wall. The design shows a frameless tree: a wide crown, densely filled with fine branches, rises above a horizontal base. The open lines let the wall become part of the pattern, creating a graphic contrast that changes with the light in the room. This metal tree of life wall art adds detail while keeping the wall visible.

Laser cut from a single piece of metal, this wall decoration is made to measure. Flourishing Canopy keeps its original outline. Choose a size in the configurator while keeping the design's proportions. Its organic look suits a calm home, a welcoming area or a workspace in need of a simple, lively focal point. This metal tree of life decor works with a range of interiors.

A flourishing crown traced in metal

The silhouette is built around a horizontal base and a broad crown. This tree of life wall art is expressed entirely through its fine branches and open outline. Within the shape, slender lines branch and cross, with irregular gaps that give the foliage its dense appearance. The design stays open: there is no backing or rectangular frame, just the tree and its branches cut from the sheet metal. This metal tree of life wall art makes a clear focal point.

Up close, your eye follows the branching lines and their variations. From further away, the crown reads as a clear graphic form, balanced by its base. Light and wall colour show through the cut-outs, so the design looks different depending on the place and time of day. It suits those who enjoy detailed botanical forms without adding an illustration around them. Flourishing Canopy carries this branching pattern through a single-piece cut-out.

Explore our metal wall art collection for more designs to hang. Have your own drawing? You can also send us your own DXF file for a cut made to suit your project.

Choose a material to suit your space

The material affects the colour, reflection and recommended placement of your tree of life. The table summarises the material options and where they can be used. Available thicknesses depend on the material selected in the configurator.

MaterialAvailable thicknessesWhere to use it
Brushed stainless steel1 to 4 mmIndoor or outdoor use
Raw steel2 to 20 mmBest suited to indoor use
Galvanised steel1 to 3 mmIndoor, or outdoors at 1.5 mm minimum
Anodised aluminium1.5 to 2 mmIndoor or outdoor use
Corten steel1.5 mmOutdoor use only

Brushed stainless steel has a bright reflection and an even surface. Raw steel has a dark, matt tone, while galvanised steel has a more understated grey finish. Anodised aluminium is lightweight and does not rust. Corten develops a patina over time and is for outdoor use only. Our metal thickness guide helps you compare options for your project.

Flourishing Canopy wall art sized to fit your space

Above a low cabinet, in an entryway or on a dining room wall, Flourishing Canopy wall art can become a visual focal point without taking over the whole room. Its broad crown works best on a wall where it has room to breathe. Leave space around the cut-out so the branches remain easy to distinguish and the horizontal base can anchor the design.

Set the size in the configurator to suit the space you have. Before confirming, mark out the proposed outline on the wall with masking tape. This helps you check the scale against nearby furniture and from the distance where you will see it. The design's proportions are preserved when resized.

In a clinic, waiting room or shared space, the tree adds a graphic accent that stays clear without imposing a complete decorating theme. At home, it can sit alongside natural materials, contemporary lines or more traditional furniture. Choose the size and material to suit the setting while keeping the motif's distinctive character.

Metal tree of life for indoor or outdoor display

Indoors, this piece can decorate a living room, hallway, office or bedroom. Against a light wall, its outline stands out clearly; against a coloured background, the open sections pick up the wall's colour for a more blended effect. Choose a material with the room's humidity and conditions in mind.

For outdoor display, consider a sheltered façade, courtyard wall or fence, and make sure the surface is suitable for your chosen fixing method. Brushed stainless steel, anodised aluminium and galvanised steel can suit these locations, depending on the material specifications. Raw steel is best kept indoors, away from damp. Corten is for outdoor use only: its patina can leave marks when exposed to water, so avoid placing it above a surface that could stain.

Fixing and care

The piece is cut as one unit and the design has no pre-drilled fixing holes. On a clean, smooth surface, an adhesive suitable for metal and the wall may be an option. Screw fixing is also possible after drilling, using a method suited to the material, the piece's weight and the wall. Supplied without accessories: screws, wall plugs and spacers are not included.

For routine care, dust the branches with a soft cloth. If needed, wipe with a slightly damp cloth and then dry the surface, taking the chosen metal finish into account. Avoid abrasive tools that could mark the material. Protected from knocks, the cut-out keeps its fine lines and graphic look over time.

Give Flourishing Canopy metal wall art a place in your home. Choose the material and size, then click “Configure & buy”. This tree of life wall decor is metal tree of life wall art is made to order for your chosen space.

Frequently asked questions about Flourishing Canopy metal wall art

What does the Flourishing Canopy tree of life wall decor show?

It is a frameless tree with a broad, very dense crown of fine branches above a horizontal base. The cut lines form the whole motif, with the wall visible through the open sections. No other graphic elements are added to the silhouette. This metal tree of life wall art keeps the motif simple and open.

Can I resize the wall decoration?

Yes. Choose a size in the configurator and the design will keep its proportions. To picture it on your wall, first check the available width and how much space you want around the tree. Marking out an outline with masking tape helps you judge its balance with nearby furniture and your viewing distance.

Which materials are available for this metal tree of life decor?

Options include brushed stainless steel, raw steel, galvanised steel, anodised aluminium and corten. They differ in appearance and use: stainless steel is bright, raw steel is darker, galvanised steel has a matt grey finish, and aluminium is lightweight. Corten is for outdoor use.

Is Flourishing Canopy suitable for outdoor use?

Yes, depending on the material selected and the conditions at the fixing surface. Brushed stainless steel, anodised aluminium and galvanised steel can suit outdoor locations. Corten is for outdoor use only and its patina may leave marks when wet. Raw steel is best kept indoors, away from damp.

How do I fix this wall decoration?

The design has no pre-drilled fixing holes. On a clean, smooth and suitable surface, an appropriate adhesive may work. You can also drill the piece for screw fixing, choosing a method to suit the metal and wall. Supplied without accessories: screws, wall plugs and spacers are not included.

How do I clean the metal tree of life?

A gentle dusting is enough to remove particles between the branches. For everyday care, this metal tree of life wall art needs only a soft touch. For a more thorough clean, use a slightly damp cloth and dry the piece afterwards. Adapt your approach to the material and avoid abrasive sponges or products that could damage the chosen finish.

Where can I display this tree of life wall art at home?

An entryway, living room, office or dining room can all work, as long as the crown has some space around it. The openwork design suits both light walls and coloured backgrounds. Consider the viewing distance and nearby furniture before choosing a size.

Can you cut a design of my own?

Yes. You can send a DXF file for a laser-cut project. This lets you create a different wall decoration or a motif coordinated with your interior. The same made-to-measure approach applies to your metal tree of life wall art. Options depend on the file provided and its geometry.

  • Style / Theme: Tree of Life
Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.