Custom metal tree of life wall art - Gnarled design
  • Custom metal tree of life wall art - Gnarled design
  • Custom metal tree of life wall art - Gnarled design
  • Custom metal tree of life wall art - Gnarled design
  • Custom metal tree of life wall art - Gnarled design
  • Custom metal tree of life wall art - Gnarled design

Custom metal tree of life wall art - Gnarled design

Metal tree of life wall art with fine, flowing lines

The metal tree of life wall art creates a striking tree shape. Its irregular trunk branches into many fine limbs, while spreading roots anchor the design. A simple circle frames the tree and gives the composition a clear outline. The whole design is a single-piece line drawing: the cut-outs let the wall show through and create contrast. This metal tree of life wall art brings a strong outline to your room.

In an entryway, living room or workspace, this wall decoration can also make a thoughtful gift for someone who loves trees and botanical designs. The gnarled tree of life is laser cut to size. Choose the material, thickness and size in the configurator to suit your space.

A laser-cut tree of life with a gnarled trunk

The design depicts a stylised tree: the eye follows the lines of the gnarled trunk into a multitude of fine branches. At its base, the roots spread out on either side. The circle around the design is simple and regular, balancing the organic shapes within it. Nothing else is added to the drawing: its decorative effect comes from the interplay between the cut metal and the wall visible through the open spaces.

Up close, the branches lend delicacy to the silhouette; from further away, the circle and trunk make a shape that is easy to read. The design complements contemporary, natural or understated interiors, depending on the material and wall colour. On a light wall, the metal creates a crisp contrast; against a dark background, the openings form a graphic composition.

The subject suggests a connection between roots and branches without imposing a single interpretation. This tree of life wall decor suits a living room, reading nook or meditation space. The design creates a distinctive focal point. Leave some space around the circle so the artwork can breathe. Browse our metal wall art, or send us your own DXF to have a personal design cut to size.

Brushed stainless steel, raw steel, galvanised steel, aluminium or corten

The material affects the final look and helps determine where to display your metal tree of life. Available options vary according to the chosen material and thickness. For wall decor, a thinner sheet may be suitable when the configurator offers it for your selection.

MaterialAvailable thicknessesWhere to use it
Brushed stainless steel1 to 4 mmIndoor or outdoor use
Raw steel2 to 20 mmBest suited to indoor use
Galvanised steel1 to 3 mmIndoor, or outdoors at 1.5 mm minimum
Anodised aluminium1.5 to 2 mmIndoor or outdoor use
Corten steel1.5 mmOutdoor use only

Brushed stainless steel has a bright surface and good corrosion resistance. Raw steel has a dark grey appearance, suited to a clean or industrial interior. Galvanised steel has a matt grey finish and zinc protection. Lightweight anodised aluminium does not rust. Corten steel develops a changing patina and is intended for outdoor use. Our metal thickness guide can help you compare the options for your project.

Custom tree of life wall art for your space

Use the configurator to choose the size of your gnarled tree of life according to the available space. Its proportions are preserved: the circle keeps its shape and the branches remain joined to the trunk as one piece. The design can go above a piece of furniture or in the centre of a wall. This metal tree of life wall art is made to fit your available space.

Before deciding, take note of furniture, openings and other features around the chosen spot. Clear space around the circle makes the roots and branches easier to see. Mark out the area temporarily with masking tape and view it from the places where you will usually stand.

Material and thickness affect the overall impression: a bright finish draws the eye, while darker metal emphasises the outlines. The configurator shows available combinations and the limits suited to the design. This makes it easier to coordinate your gnarled tree of life with the wall and its atmosphere. The metal tree of life wall art can bring a natural accent to a plain surface.

Metal tree of life wall decor for indoors or outdoors

At home, the gnarled tree can be displayed in an entryway, living room, office or clear hallway. It also suits a waiting room or reception area. Brushed stainless steel, anodised aluminium and galvanised steel can be used indoors or outdoors. Raw steel is best suited to a dry indoor location.

Outside, the design can decorate a courtyard wall, fence or facade. Choose a material suited to the exposure and make sure the supporting surface is appropriate. Brushed stainless steel and anodised aluminium are suitable for these uses. Galvanised steel is suitable outdoors from 1.5 mm thickness.

Corten steel is for outdoor use only: its patina develops over time and may run when exposed to rain. Consider the surfaces beneath the decoration to avoid marks. For indoor use, choose another material from the table.

Fixing and care for your metal wall art

The decoration is laser cut as one piece. The design has no pre-drilled fixing holes. On a sound, smooth surface, an adhesive suited to the weight and material may be an option. Screw fixing requires drilling both the piece and the supporting surface beforehand, using a method compatible with the material and wall. Supplied without accessories: screws, wall plugs and spacers are not included.

For routine care, dust with a soft cloth; if needed, wipe with a slightly damp cloth and then dry the surface. On brushed stainless steel, wipe in the direction of the grain with a suitable product. Avoid abrasive sponges and chlorinated products. Outdoors, check the fixing and supporting surface from time to time.

Give the gnarled tree of life a place on your wall. Choose the material, thickness and size, then click “Configure & buy”.

Frequently asked questions about the metal tree of life wall art

What does the gnarled tree design represent?

It depicts a stylised tree with an irregular trunk, many fine branches, spreading roots and a simple circle around the whole design. The line drawing forms a single laser-cut piece. The openings let the wall show through and give the design its visual lightness.

Can the gnarled tree be displayed outdoors?

Yes, if you choose a material suited to the exposure and an appropriate supporting surface. Brushed stainless steel and anodised aluminium are suitable for indoor and outdoor use. Galvanised steel can also be used outdoors from 1.5 mm thickness. Raw steel is best suited to a dry indoor location.

Can corten steel be used indoors?

No. Corten steel is for outdoor use only because its patina changes over time and may run when exposed to rain or moisture. These marks can stain nearby surfaces. For an indoor space, choose brushed stainless steel, raw steel, galvanised steel or anodised aluminium according to the intended use.

How do I choose the size of this wall decoration?

Choose a size in the configurator, taking into account the clear wall area and the distance from which the design will be viewed. Leave space around the circle to make the branches and roots stand out. Temporarily marking the area with masking tape can help you picture its footprint before deciding.

How do I attach the decoration to the wall?

The piece has no pre-drilled fixing holes. On a sound, smooth surface, an adhesive suited to the weight and material may work. For screw fixing, plan to drill the piece and supporting surface using a suitable method. The decoration is supplied without accessories: screws, wall plugs and spacers are not included.

Which material should I choose for this tree of life?

Choose according to the location and the look you want. Brushed stainless steel has a bright finish and suits a range of locations. Raw steel has a darker appearance and is best used indoors in a dry space. Galvanised steel and anodised aluminium suit indoor or outdoor use depending on conditions. Corten is for outdoor use only.

How do I care for metal wall art?

Dusting with a soft cloth is usually enough. To clean it, wipe with a slightly damp cloth and then dry. On brushed stainless steel, follow the grain and use a compatible product. Avoid abrasive sponges and chlorinated products to protect the surface. Also check the fixing if the piece is displayed outdoors.

Can I have my own design cut?

Yes, you can send your own DXF file for cutting in the available material and thickness. The drawing should be prepared with the outlines and openings you want. This option lets you create a distinctive decoration with proportions designed for your wall and project.

  • Style / Theme: Tree of Life
Fast delivery

Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*

Volume discounts

The more you buy, the more you save on your order.

Pay in 4 interest-free installments

Pay in 4 interest-free installments with PayPal on your orders.