-
⭐ Dispatched within 3 days, still rated 9.6/10 from over 5,000 reviews! ⭐
Custom manhole cover – Square aluminium checker plate
- For outside use
- Robust
- Non-slip
Protection · Aluminium checker plate
Square aluminium manhole cover: a real cover, without the weight-lifting
A chamber or a light tank needs a non-slip plate that can still be lifted. This square aluminium manhole cover, in aluminium checker plate, is supplied without a frame and stays lighter than steel. Aluminium has the advantage of remaining a cover, not an exercise.

Square aluminium checker-plate cover laid on a paved path, beside a wall and a lawn.
A lighter square plate, to lay on the existing opening
It is chosen for a light tank, an access hatch or a chamber that must be opened by hand. The square format sits on a straight opening. No frame comes with the plate.
Laser-cut in our workshop in Colmar, Alsace, this square aluminium manhole cover is made from aluminium checker plate AlMg3, with a 4 mm core plus 1 mm of raised pattern, in a checker effect. You choose the dimensions in the configurator.
What changes with a square aluminium manhole cover
Supplied without a frame
You receive the plate alone, to be laid on the existing support.
Lighter than steel
Aluminium checker plate is easier to lift than a steel cover, for a light tank or an access hatch.
A non-slip surface
The checker pattern grips under the sole, even in wet weather.
Cut to your dimensions
You enter the measurements in the configurator, for the opening to be covered.
Deburred edges
After laser cutting, the edges are not sharp.
Made in France
Each cover is cut and checked in our Alsatian workshop.
Four ways to use it
This square aluminium manhole cover is laid on light outdoor chambers and tanks:
- On a light tank or an access hatch
The plate covers the opening and stays lighter to lift. - On a garden inspection chamber
It closes the existing opening, without an added frame. - On a technical access opened by hand
Aluminium avoids turning each opening into a feat of strength. - In an outdoor service area
The non-slip plate stays outdoors, in its place.
Fitting and fixing in 3 steps
1
Take the measurements of the opening
Note the length and width, or the diameter, then enter them in the configurator.
2
Check the existing support
The cover sits on the rebate or the support already in place. No frame is supplied with the plate.
3
Put the cover in place
Set it on the opening. Depending on the support, an additional fixing may be planned; the accessories are not supplied.
Supplied without accessories and without a frame: you receive the plate, to be laid on the existing support.
Aluminium checker plate and care
- Wipe the raised pattern to remove mud and leaves. Aluminium can scratch: that is typical of a raw, patterned metal.
- This reference is designed for the outdoors. It is not presented as vehicle-trafficable.
- The round format uses the same material. The square stainless manhole cover is better if you want stainless steel outdoors.

Close-up of the aluminium five-bar tread, with its raised bars.
Why John Steel
Made in France
Each cover is cut and checked in our workshop, not imported.
The precision of the laser
A clean cut, deburred edges, a square plate that sits frankly on the existing opening.
An honest material
Aluminium checker plate AlMg3 is chosen to stay lighter to lift, with a non-slip checker surface.
A metalwork workshop
The same know-how produces your made-to-measure metal cutting projects.
The whole family of manhole covers
This square aluminium manhole cover is the aluminium checker plate model, supplied without a frame. The round format uses the same material. The square stainless manhole cover is better if you want stainless steel outdoors. You will find all our manhole covers.
This square aluminium manhole cover is only waiting for the measurements of your opening: choose the dimensions, then click “Configure & buy”.
Frequent questions about the square aluminium manhole cover
What are the dimensions of this cover?
You choose the measurements in the configurator.
Is it supplied with a frame?
No. It is supplied without a frame and without accessories.
Is it vehicle-trafficable?
No. This aluminium checker plate reference is not presented as vehicle-trafficable. It suits a light tank or an access hatch.
Why choose aluminium rather than steel?
Aluminium is lighter to lift. Steel checker plate, for its part, is vehicle-trafficable.
Are the edges sharp?
No, the edges are deburred after laser cutting.
Can magnets be fixed to it?
No. Aluminium is not magnetic.
What is the thickness?
The core is 4 mm, plus 1 mm of raised pattern.
Can another shape be cut?
This reference is square, made to your dimensions. For another design, see our made-to-measure metal cutting service.
- Properties : Suitable for outdoor use
- Minimum dimensions: 30 x 30 mm
- Maximum dimensions: 2980 x 1480
- Thickness: 4 mm core + 1 mm checker pattern
- Forme : Square
- Application: Water meter, technical hatch or light pit cover
- Finish & Appearance: Checker plate effect
- Reference: AlMg3 (EN AW-5754)
- Magnet Compatibility: Standard (Non-magnetic)
- Manufacturing: French
- Product Type: Lid / Access Hatch / Cover
- Usage and Applications: Outdoor
- Edge Finish: Deburred (Safe to handle)
- Non-slip: Yes
Delivery in 3 or 8 working days. Enjoy free shipping with the Boost option!*
The more you buy, the more you save on your order.
Pay in 4 interest-free installments with PayPal on your orders.
Avis clients
Découvrez ce que nos clients pensent de ce produit
Perfect
Very good value for money
Product conforms to the order, clean cut, with non-sharp edges. Slightly shiny appearance, should dull over time.
Plate conforms to the request. The delivery was fast. Excellent work. Perfect
Perfect
Very good value for money
Product conforms to the order, clean cut, with non-sharp edges. Slightly shiny appearance, should dull over time.
Wall décor
Custom metal letter A monogram
Custom mirrors
Wall shelves
Magnetic boards
Custom raw steel firewood rack
Metal Christmas trees
Garden screens
Stepping stones
Custom corten steel edging cover
House numbers
Custom metal letter B monogram
Custom metal letter C monogram
Kitchen splashbacks
Custom-made stainless steel hood splashback
Worktops
Metal wall panels
Custom food-grade stainless steel pastry board with edge
Custom Brushed Aluminium Kitchen Plinth / Kickboard
Custom-made raw stainless steel fire pit cooking plate
Custom round raw stainless steel plancha griddle plate
Door kick plates
Door protection plates
Threshold plates
Protective angle trims
Stair nosings
Wall skirting boards
Floor protection
Manhole covers
Shower drain grilles
Ventilation grilles
Road, trackway & shim plates
Custom-made raw steel ground protection plate
Custom-made raw steel outrigger pad
Custom raw steel shim disk
Custom raw steel mounting plate
Custom raw steel reinforcement plates
Custom aluminum tread plate workshop plan
Welding table top 1200 x 800 mm (12 mm thickness – System 16)
Aluminum checker plate custom cut for trailer bed
Custom-made anti-slip aluminum livestock trailer flooring
Custom brushed stainless steel agricultural feeder bottom plate
Custom raw steel reinforcement triangle
Heavy Duty Sealant Glue
Dr. Beckmann stainless steel cleaner
Microfiber cleaning cloth
Custom-made chequer plate stainless steel flat bar
Custom-made Corten steel flat bar
Custom-made mirror finish stainless steel flat bar
Brushed stainless steel flat bar
Leather-textured stainless steel flat bar
Anodised aluminium flat bar
Custom-made chequer plate aluminium flat bar
Raw and bright stainless steel flat bar
Magnetic stainless steel flat bar
Raw and bright marine-grade stainless steel flat bar
Raw stainless steel flat bar
Raw marine-grade stainless steel flat bar
Chequer plate steel flat bar
Raw aluminium flat bar
Brushed anti-fingerprint aluminium flat bar
Raw film-coated aluminium flat bar
Custom-made galvanised steel flat bar
Custom-made Corten steel U-channel
Custom-made galvanised steel U-channel
Chequer plate steel U-channel
Custom-made raw steel U-channel
Raw steel U-channel
Custom-made brushed stainless steel U-channel
Custom-made raw and bright stainless steel U-channel
Custom-made magnetic stainless steel U-channel
Custom-made raw and bright marine-grade stainless steel U-channel
Custom-made raw stainless steel U-channel
Custom-made raw marine-grade stainless steel U-channel
Custom-made chequer plate stainless steel U-channel
Custom-made raw aluminium U-channel
Custom-made raw film-coated aluminium U-channel
Custom-made chequer plate aluminium U-channel
Raw steel Z-section
Custom-made galvanised steel Z-section
Chequer plate steel Z-section
Custom-made Corten steel Z-section
Custom-made brushed stainless steel Z-section
Custom-made raw and bright stainless steel Z-section
Magnetic stainless steel Z-section
Custom-made leather-textured stainless steel Z-section
Custom-made raw and bright marine-grade stainless steel Z-section
Custom-made raw stainless steel Z-section
Custom-made chequer plate stainless steel Z-section
Custom-made raw aluminium Z-section
Custom-made raw film-coated aluminium Z-section
Custom-made chequer plate aluminium Z-section
Custom-made raw steel L-angle
Galvanised steel L-angle
Chequer plate steel L-angle
Custom-made Corten steel L-angle
Custom-made brushed stainless steel L-angle
Custom-made raw and bright marine-grade stainless steel L-angle
Custom-made chequer plate stainless steel L-angle
Custom-made raw aluminium L-angle
Custom-made film-coated raw aluminium L-profile
Custom-made aluminium chequer plate L-profile
Magnetic stainless-steel L-profile
Brushed
Brushed
Chequer plate
Chequer plate
Brushed
Galvanised
Made-to-measure rectangle raw steel plate
Customized rectangular galvanized steel plate
Custom brushed stainless steel rectangular plate
Custom made rectangle mirror stainless steel plate
Custom-made checkerboard rectangle aluminium plate
Made-to-measure rectangle anodized aluminum plate
Made-to-measure square raw steel plate
Made-to-measure square galvanized steel plate
Made-to-measure square brushed stainless steel plate
Made-to-measure square mirror stainless steel plate
Custom-made square checkerboard aluminum plate
Made-to-measure square anodized aluminum plate
Custom-made round raw steel plate
Customized round galvanized steel plate
Custom-made round brushed stainless steel plate
Custom-made round mirror stainless steel plate
Custom-made round aluminium checkerboard plate
Custom round anodized aluminum plate
Custom-made diamond plate steel triangle
Custom-made brushed stainless steel triangle
Custom-made raw aluminum triangle
Custom raw steel trapezoid
Custom-made brushed stainless steel trapezoid
Custom-made raw aluminum trapezoid
Custom octagonal raw steel plate
Custom octagonal brushed stainless steel plate
Custom raw aluminum octagonal plate
Custom raw steel cross
Custom brushed stainless steel cross
Custom raw aluminum cross
Plate conforms to the request. The delivery was fast. Excellent work. Perfect